Stems

Sunlite's Adjustable Quill Stem puts your bars right where you want them. This wonderfully easy-to-use stem adjusts from 0 to +50 degrees—more than enough to help you find your ideal position. And, the 2-bolt clamp holds securely holds your bars.

- 3D forged 6061 alloy road stems in 6 or 17 degree angles - Lightweight 4 bolt faceplate - Material: AL6061-T6 - Finish: Sandblasted

- 8x1mm Allen head - Bag of 10

Every Profile Design product is perfectly optimized to minimize aerodynamic drag. So, it's no surprise that Profile's Aeria Stem has hidden bolts and a low profile faceplate to smooth oncoming air. The sculpted shape is constructed from strong, lightweight forged aluminum, and the 17-degree drop ensures an aerodynamic fit on your time trial or triathlon bike.

• Forged aluminum • Classic streamlined shape • 2-bolt clamp • 180mm tall

• Aluminum head • Stainless-steel 180mm-tall shaft • 1-inch model has 22.2mm quill, 15/16-inch model has 21.1mm quill • Single-bolt clamp

• Steel • Polished-chrome finish • 1-inch model has 22.2mm quill, 15/16-inch model has 21.1mm quill • 10-inches tall (extra tall)

The Atmos 7k stem is a lightweight performance stem designed for trail and cross-country use and is the lightest stem in the Atmos range. Featuring a rise or drop of 6° depending on your preference, all fasteners are adjustable via a T25 tool for easy, quick adjustments. The Atmos 7k also features an integrated GoPro mount. - ±6° angle - Integrated GoPro mount - T25 fasteners for 1 tool across the cockpit SPECIFICATIONS - Stem Angle/Rise: 6 degrees - Clamp diameter: 31.8mm - Steerer clamp diameter: 1-1/8 in - Hardware: Steel

Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp. - 31.8mm can be used with 26.0 bars with additional shim (SM5317) - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Weight: 130g-180g

A new breed of champion is born. The WCS Carbon Solostreem features a classic bend, UCI-compliant aero top section with short/shallow classic drop, integrated mount ready for K-Edge or similar devices, and underside grooved cable routing for a sleek appearance. It enjoys a matte UD carbon finish and its curved stem clamp greatly reduces steerer stress. - Material: Carbon monocoque with forged alloy steerer clamp - Stem Angle: 84 -degree - Drop/Reach: 126/75mm(Measured center-to-center where the levers mount) - Sweep/Flare: 4.7/1-degree - Features mounting holes for computer/accessory mount - Matte UD carbon finish - Weight: 350g (42cm x 100mm)

Your stem may seem inconsequential, but it is the point of transfer between your skilled handling and the bike itself. An impressive refinement of our popular top level Easton alloy stem, the newest generation of EA90 stems have an larger boom diameter for increased stiffness and, by utilizing our highest quality alloys, we were able to remove excess material for even more weight savings. We've also created a custom Garmin mount, known as the ICM system, for cleaner lines and improved aerodynamics (included). Our EA90 stem comes in at 120 grams (100mm). With weights like these, we surpass much of the alloy and carbon competition in the market, while giving you the durability, confidence and control you expect from Easton. - 3D Forged EA90 Alloy - Easton ICM direct-mount faceplate computer mount compatible - TopLock Design for easy bar installation - EA90 includes Easton ICM Garmin computer mount - Finish: Black Ano - Weight: 120g (100mm) - Rise: +/- 7 degrees - Clamp Diameter: 31.8mm - Steerer: 1 1/8"

With its classic blend of high strength and low weight, Easton's EA50 stem is a smart choice for your favorite ride. It's made of 3D forged aluminum for amazing stiffness and strength. Easton's Top-Lock technology locks the stem and faceplate together, creating a highly rigid interface while minimizing the loads on the bolts, making the EA50 perfectly safe for carbon bars.

The Ritchey WCS Trail Stem represents Ritchey's first stem specifically designed for today's 5-6-inch travel trail bikes using wide bars. More than just a beefed-up version of other stems, with the Trail stem we revised the patented C260 clamp to a 220-degree version that fits a wider variety of riser bar bends and still packs a dramatic increase in stiffness and strength over competitor's designs. Using 3D Forged 2014 alloy, the WCS Trail Stem serves up superior strength while remaining lightweight. The extra-wide bar clamp takes stiffness to the next level, fits most riser bars, and ensures plenty of confident control out on the trail. - Material: 3D Forged 2014 alloy - Angle: Zero rise - Steerer Height: 45mm - Faceplate Width: 40mm - Steerer: 1-1/8” - Ritchey Blatte finish - 115g (70mm)

Profile's Aris stem is a no-nonsense stem made from 6061-aluminum that's been shot-peened and anodized for strength and durability. The 4-bolt face plate is stiff, ultra tough and makes handlebar changes a breeze. And, the opposing-bolt steerer clamp is safe and secure.

- Ideal for Trail, Enduro, and Downhill MTB applications - 3D forged and CNC machined AL6061-T6 alloy construction - Designed for use with oversized 35mm handlebars - Lightweight, extra-wide 4-bolt front loading one-piece faceplate design - 40mm stack height - Weight: 115g - ISO-Mountain safety certified - Fork Diameter: 1-1/8" - Length: 35mm - Bar Clamp: 35mm - Angle: 0° - Material: AL6061

For cross country and all-mountain riding, Dimension Trail Stems provide a broad array of sizing options, rigorously tested to ISO 4210 Mountain standards. - Constructed with AL-6061-T6 aluminum - Shot-peened finish - Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes

The Afterburner MTB Stem is 3-D forged and CNC machined from AL6061/T6. You have the option to run this stem at a + or – 6-degrees to suit your racing style. - 3D forged and CNC machined from AL6061/T9 - 4-bolt cold forged front clamp - 40mm clamp stack height - Weight: 149g

- Steerer Diameter: 1" or 1-1/8" (includes shim) - Length: 70, 90, 110mm - Bar Clamp: 25.4 or 31.8 (includes shim) - Angle: +/- 35 degrees - Material: 6061 Aluminum - Shot-peen finish

- Forged & blasted 2014 alloy for high strength & fatigue resistance at a reasonable weight - Four bolt bar clamp holds bar securely in position - Interlocking U-Shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts - Faceplate eliminates ‘stress risers'

• Forged aluminum • 2-bolt clamp • 180mm tall

- Full UD carbon construction stem - 4 bolt aluminum faceplate for added rigidity - Stainless steel hardware - Reversible +/-7° angle - 40mm stack height - 125g weight in 100mm length - ISO-Road safety certified

Origin-8's Classique Sport ATB Stem is crafted from light and durable forged aluminum. It features a 2-bolt handlebar face clamp for easy bar installation and removal. And it even has a built-in brake cable stop. This stem is 180mm tall from the bottom to top of the quill bolt so that you can raise and lower your bars (the bolt is hidden inside the vertical part of the stem). This is a nice choice for that classic mountain or touring bike.

Origin-8's X-Tra Lift Stem Riser is an adapter that lets you raise your handlebars and stem. It fits over and securely bolts to 1 1/8-inch forks to extend them. This gives you more height to raise your stem/bars. You use the included spacers to dial in the best fit. The Stem Riser is made from forged 6061 aluminum and is anodized for durability.

- Adjustable top mounted threadless stream - Adjustable from 0 to 60 degrees - Available in two lengths - Material: Alloy

Hollow stems are cold forged from the highest quality 6061-T6 aluminum available. Featuring an open skeletal design and a dual mid-bolt wedge mounting system, they are lightweight yet maintain a very high level of strength. A 53mm extension stem weighs just 218 grams/7.7 ounces. By removing the rear pinch bolts and moving the mounting bolts to the middle of the stem, we reduced the weight and size and eliminated a serious hazard to the rider’s knees. These stems come with either a 48- or 53mm extension and a 22.2mm bar bore. To ensure proper clamping force, the stem must be mounted on a fork with at least 45mm of exposed steerer tube. Not compatible with forks that have carbon fiber steerer tubes.

FSA's Omega line is the perfect workhorse component group for the sport rider who wants race-winning technology and durability along with classic good looks. - 3D-forged and CNC-machined from AL6061/T6 - 4-bolt cold-forged face plate - Chromoly hardware - ±6° - 31.8mm handlebar clamp diameter - 35mm fork clamp stack height - 127 grams (100mm)

Featuring purpose-engineered shaping, Giant’s all-new aluminum Contact SL stem is stiff, strong and ultra-light. Available in 0° and ±10°angles and eight lengths from 70 to 140mm brings superior performance to a wide range of riders. VERSATILE FIT Available in eight sizes, ranging from 70mm to 140mm, and 2 angles (±0°/ ±10°), the Contact SL stem is perfect for any ride experience. - Super stiff, ultra-light aluminum - Compatible with all Giant OD1 and OD2 steer tubes - Integrated silhouette from stem to cone spacers - Compatible with Giant's Contact SLR/SL computer mount

ULTIMATE PERFORMANCE Featuring purpose-engineered shaping, Giant’s all-new Contact SLR Stem is stiff, strong and ultra-light. Available in ±10° and ±20° angles and eight lengths from 70 to 140mm, the Contact SLR stem accommodates a wide range of riders and is the perfect complement to the TCR or any other high-performance road bike. STIFF AND LIGHT With purpose- engineered shaping, full-carbon Contact SLR stem offers maximum stiffness at minimum weight. Compared with the previous Contact SLR stem, the all-new Contact SLR road stem is 9% stiffer and 7% lighter. AERO INTEGRATION The integrated stem cap of the all-new Contact SLR stem ensures a smooth flow of air over the top of the stem while the specifically designed shape of the spacers offers seamless integration and air transition over the side of the stem. VERSATILE FIT Perfect for any elite rider, the Contact SLR road race stem is available in eight sizes, ranging from 70mm to 140mm, and 2 angles (±10°/ ±20°).

- Lightweight, 3D forged, 2014 aluminum alloy - Proprietary Stealth recessed cable routing system enhances aerodynamic performance - Oversize box-section increases torsional stiffness with tuned vertical compliance

- C-220 degree extra-wide bar clamp improves stiffness and fits most riser bars - 3D forged 6061 alloy - 42mm steerer height with 41mm faceplate width - 142g (90mm)

The new Ritchey WCS Toyon stem takes its lead from the original, award-winning Ritchey C220 stem and gives it a more modern shape and increased stiffness for improved handling and greater responsiveness. The Toyon retains the clamping surface area of the C220, which creates a more secure interface by wrapping a full 220° over the handlebar. Its bolt forces are aligned with the clamp so that the body "embraces" the handlebar—a design which is less prone to damaging lightweight bars and allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. Built from life and all that inspires it, the Toyon builds upon the proven and celebrated C220 design with a fresh, squared aesthetic that adds to the overall harmony of modern frame designs—matching its good looks with enhanced confidence and a more lively feel for wherever your rides take you. - Matching top cap included - 6° of positive or negative rise - 1-1/8" steerer diameter - Stem body wraps 220° around bar clamping area, holding it in place for easy installation - Material: 2014 alloy - Bolts: stainless steel black - Matching top cap included - Angle: 84°/6° - Bar clamp diameter: 31.8mm - Bar clamp width: 44mm - Steerer diameter: 1-1/8" (28.6mm) - Steerer height: 42mm - Weight: 140g (100mm)

You really can have it all-the WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The WCS C22 84D Stem offers 6-degrees of positive or negative rise. First proven on the Ritchey Trail Stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality CrMo steel bolts are used throughout. - Material: 3D forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8mm bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Faceplate Width: 42mm - Blatte finish - 121g (110mm)

Proven time after time to be a reliable, easily adjustable system that continues to outperform the competition, the 4-Axis stem is a surefire go-to for an entry level stem that has world-class performance. - Bar Clamp Diameter: 31.8mm - Material: Alloy - Stem Angle: 30 degrees - S.H.I.S. Stem Clamp Diameter: 28.6

You really can have it all—the new WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove, thanks to a press-fit handlebar clamp interface and forward-facing hardware. First proven on the Ritchey TRAIL stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220-degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The Carbon Matrix stem body is forged 7075 aluminum with a stiffness-enhancing carbon exoskeleton which makes this 12% stiffer than the WCS alloy C220 stem. Premium quality CRMO steel bolts are used throughout. - Material: 3D forged 7075, carbon encased body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8 bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Steerer: 1-1/8” - Faceplate Width: 42mm - Matte UD carbon finish - 126g (110mm)

A Trail-Rated, carbon-bodied, 31.8mm stem for mountain bikers seeking best-in-class performance, response, and vibration absorption. The M6 stem is designed to complement the look and ride feel of the ENVE M5 and M6 handlebars. - Bar Clamp Diameter (mm): 31.8 mm - Material: Carbon - S.H.I.S. Stem Clamp Diameter: 28.6 - Stem angle: 0-degree

Salsa's Guide Stem is lightweight, durable, and provides excellent steering response on the road or trail. - Bead-blasted, then anodized - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate design for easy installation - Stack Height: 40

The WCS C220 stem is easy to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. - The handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar - Bolt forces are aligned with the clamp so that the stem body embraces the handlebar which is less prone to damaging lightweight bars - Clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness

The RaceFace Aeffect 35 stem brings the advantages of a 35mm bar to the XC/Trail crowd at a mid-level pricepoint while maintaining a refined Race Face look. - Forged and machined from 6061 aluminum - Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts - Stack Height: 39mm - Weight: 155g (60mm)

- Forged AL6061-T6 alloy construction - Matte finish with laser-etched graphics - ISO-Mountain safety certified - 4-bolt handlebar clamp - Quill length: 180mm

Origin-8's Classic Pro Quill Stem is crafted from light and durable forged 6061 aluminum with chrome-plated steel bolts. The handlebar clamp bolt is hidden for a clean look. This sweet stem has a polished anodized finish for durability and style. Different lengths are available for customizing the reach to your handlebars.

3D-forged and CNC-machined AL6061/T6 mountain bike stem. - 4-bolt cold-forged alloy faceplate - Chromoly hardware - 40mm fork clamp stack height

To meet your urban cycling needs, FSA brings you their Metropolis Stem. It features a clean-looking 2-bolt front-mounted faceplate and is made of 3D-forged aluminum for lightweight strength. The 30° rise puts you in an alert, upright riding position — ideal for navigating city streets. - Stack Height: 40mm - Weight: 180g

The SL Sprint Stem is an ideal balance of stiffness and lightweight. The stem weighs in at just 1.8g per newton meter of stiffness using SRAM's Exogram technology. Designed with feedback from top pros to meet the unrelenting demands of Grand Tour sprinters. Zipp also tapped into expertise gained from its pioneering carbon stems and exhaustively researched the marketplace to create the SL Sprint Stem. The SL Sprint comes with its own stem cap that's designed to be aerodynamically efficient by blending into the stem body. Available in six sizes, ranging from 90 to 140mm, to meet any rider's fit needs. - Updated distinctive Zipp cosmetics - Carbon Exogram construction delivers the stiffest stem on the market gram for gram. - Secure with four bolt faceplace using Torx T25 bolt heads - Matte Black finish - Lifetime warranty - Zipp Quickview integrated computer mount available separately

The Boxcar Stem from Paul Components is the perfect combination of stiffness, strength, and reasonable weight. All screws are high-strength stainless steel with the popular T25 head. Made in Chico, California with US-sourced 2024 aircraft alloy. - Stack height: 36mm - Weight: 155g (90mm)

Save your steerer tube and eliminate headset spacers with the Velo Orange Tall-Stack alloy stem. It gives your bike's cockpit a nice clean look. Available in Polished or Black, the 17-degree angle allows the stem to be level on most modern frames. And, you can use handlebar clamp shims to adapt to smaller handlebar clamp diameters, if you like. - Stack height: 75mm - Not recommended for use with carbon steerer tubes

Velo Orange Happy Stem. A polished threadless stem with a 45 degree angle to keep your back and wallet happy. - At least 37mm of steerer is required - Does not require a stem cap. Longer compression bolt included - Not compatible with carbon steerer tubes

The Box Two Front Load is a modern, 22.2 stem designed specifically for BMX racing. Box Two Front Load stem bodies are cold-forged and CNC-machined from the highest quality 6061-T6 aluminum. The lightweight front clamps are cold-forged and CNC-machined for increased stiffness and strength. -Material: 6061-T6 Aluminum -Process: Cold-Forged -Hardware: Chromoly Clamping Bolts -Finish: Anodized w/Laser-Etched Graphics Weight: · 48mm: 224 g / 7.9 oz · 53mm: 230 g / 8.1 oz

EA70 alloy continues to provide an impressive balance of performance and value. From lightweight aluminum tubing, to 3D forging processes and our TopLock technology, Easton alloy stems integrate careful design choices into the lineup. The EA70 stem is also compatible with the ICM integrated Garmin mount. - 3D Forged EA70 Alloy - Easton ICM direct-mount faceplate computer mount compatible - TopLock Design for easy bar installation - Finish: Black Ano - Weight: 132g (100mm/0) - Rise: +/- 7 degrees - Clamp Diameter: 31.8mm - Steerer: 1 1/8"

Renthal's revolutionary Integra 35 stem combines high strength with ultra-low weight. The use of two independent, C-shape handlebar clamps allows the stem body material to be reduced to a minimum, while maintaining an incredibly stiff and strong structure. The ultra-wide, 64mm handlebar clamping area increases torsional rigidity and the use of just six bolts vastly reduces overall weight. In addition, the uninterrupted clamp on the underside of the handlebar eliminates stress risers found on most other clamps, which can lead to handlebar failure.

The Guide Trail Stem translates your handlebar input into precise trail movements. It’s an ideal choice for modern trail bikes that have a long front center and wide bars. The Guide Trail Stem is lightweight, durable, and available in a variety of sizes to suit rider preferences. - AL-6061-T6 aluminum construction - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate design - 35.0mm bar clamp - 28.6mm stem clamp - 40mm stack height - Bead-blasted, then anodized, finish

Velo Orange Cigne Stem gets its name from the French word for swan. The shape is inspired by the old gooseneck LD stems by Ibis and Cunningham, but with a few accommodations for modern bike needs. 1 1/8" threadless and 31.8mm handlebar clamp with a removable faceplate. With 145mm of vertical height from the base of the stem to the center of the clamp, it's pretty useful for getting your handlebars up high without using a ton of spacers. - Star-nut should be approximately 1cm from the top of the steerer tube - Minimum 55mm of steer tube required - Not compatible with carbon steerer tubes - No top cap needed. Stem includes tension bolt

This BMX quill stem combines a steel rod with an alloy top. The 4-bolt top clamp securely fastens handlebars.

With its alloy/steel construction and 4-bolt clamp design, the MX is a trusty BMX quill stem. - Quill Length: 4-1/4-inches - Quill diameter: 21.1mm

Origin-8's Classic Sport Quill Stem is crafted from light and durable forged 6061 aluminum with chrome-plated steel bolts. The handlebar clamp bolt is hidden for a clean look. Different lengths are available for customizing the reach to your handlebars. This sweet stem is 180mm tall from the bottom of the bolt to the top of the stem so that you can raise and lower your bars, too.

Full CNC machined AL6061-T6 alloy construction - 40mm stack height - 4 bolt front loading faceplate design - EN-Mountain safety certification

- Ideal for Trail, Enduro, and Downhill MTB applications - 3D-forged and CNC-machined AL6061-T6 alloy construction - Lightweight, extra-wide 4 bolt front-loading one-piece faceplate design - 40mm stack height - Weight: 115g - ISO-Mountain safety certified - Fork Dia: 1-1/8" - Length: 35mm - Clamp Diameter: 31.8mm - Rise: 0° - Color: Black - Material: AL6061-T6

- Micro Grain Refined (MGR) alloy - 5mm headset spacer included - 2D forged MGR alloy - CNC weight optimized - Shotpeen anodized - Key technologies: MGR, chamfered bar clamp - Material: 2D Forged MGR Alloy,CNC Weight Optimized - Length (mm) : 35 / 50 - Rise : 0 Degree - Diameter (mm): 31.8 - Stack height (mm): 35 - Weight (g): 150 (35mm) / 180 (50mm) - Finish: Shot peen anodized, laser logos

- 100% uni-directional carbon body provides a lightweight structure that is torsionally and laterally stiff - Over rough roads the carbon fiber laminate helps absorb vibration and reduce hand and upper body fatigue - Titanium hardware and lightweight aluminum faceplate - 107g

Race Face's Ride stem is designed specifically for riders looking for Race Face engineering and quality at a value price point. - Forged and shot peened from 6061 aluminum for high strength and fatigue resistance at a reasonable weight - Four bolt bar clamp holds bar securely in position - Machined logo on bar clamp

A no-muss, no-fuss, four-bolt stem perfect for any threadless 1-1/8" steerer. Available with 25.4mm clamps, so whatever your dream bars, you can make 'em fit. - Choose between 80mm or 90mm reach (90mm is standard on our Original Series) - +-7 degrees - Threadless 1-18"