Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Pumps/Inflation

Serfas 16 Gram CO2 Threaded Cartridges
High-quality, compact, and easy-to-use CO2 cartridges. - 16 Gram Threaded Cartridge - Fits All CO² Pumps That Accept 16G Threaded - Small, Compact, Easy To Use - 1 Box / 20 Cartridge Count Capacity Dependent On Tire Size: - 29×2.0—31 PSI - 26×1.95—40 PSI - 700x23c—130 PSI - 700x28c—86 PSI - 20×2.0—48 PSI - 24×2.0—42 PSI
Sunlite Ball Inflating Needle
$1.99
- Ball-inflating needle for footballs, basketballs and more
Sunlite Replacement Frame Pump Hose
$1.99
- Genuine Sunlite replacement hose - Type: Fits Sunlite Frame Pump : 5.25mm
Prestacycle Presta Head Rubber Gasket
$2.95
Prestacycle redesigned the Presta Grommet in May 2012 to fit to modern standards. PRestacycle's design works so well, it’s been copied by others including major floor pump makers. Prestacycle's design engages the Presta valve just below the cap threads and requires less insertion. The head is now very easy to get on and off, and gives a nice “click” feeling when it’s installed in the right position. Safe for all types of Presta valves, including tubeless and tubeless-conversion valves. Will not harm newer lightweight performance valves. Fits all Prestaflator BIG Push/pull Presta heads. Also fits all Silca pump heads that use the 24.1 or 242 Gasket.
Prestacycle Spin Head Rebuild Kit
$2.95
Renew all the seals in your Prestaflator spin head. These o-rings fit the seals, Plus there are five (5) Presta Valve replacement washers. Replace as needed for a good connection to your tire valve.
Park Tool Super Patch Kit (Carded)
$3.49
The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.
Park Tool Vulcanizing Patch Kit
$3.95
Park's Vulcanizing Patch Kit includes 4 round patches for small holes and 2 oval patches for wider cuts; a tube of self-vulcanizing glue that bonds the patches to your tube super securely; and sandpaper for preparing the punctured area for gluing. The kit comes in a small plastic box to fit in your seat bag or pack.
Prestacycle Prestaflator Rebuild Kit
$3.95
Renew all the seals in your Prestaflator tool. These o-rings fit the hose, Pressure Release button and Trigger Plunger on a Prestaflator tool. Kit also includes internal trigger-plunger washers for 2010 and newer Prestaflator tools. O-rings made from high quality buna-nitrile (BN70) rubber with a durometer rating of 70. Updated 2013 Plunger seal is more reliable and gives the tool easier trigger regulation and retro-fits to 2010 and newer tools. Presta Head washers and rebuild kits are now sold separately.
Sunlite Thumb Lock End
$3.99
Replaces worn end on any pump hose. - Head Type: Schrader
Sunlite Pump Straps
$4.49
• Secures frame pump to frame • Nylon • Also good for use as a watch band
Jandd Pump And U-Lock Tie
$4.95
Made of heavy-duty hook-and-loop material, the Pump and U-Lock Tie also has a neoprene pad stitched next to the rectangular plastic common loop. Put the neoprene pad between your pump and frame, double-back the hook strip onto the loop, and you can rest assured that no matter how hard you ride, your pump will stay put. In addition to attaching pumps, the Pump Tie is also excellent for securing U-locks, fishing poles, and other delicate items that require a secure bond and a load-damping pad. - Dimensions: 1.5 x 10 inches - Weight: .5 ounces/14 grams
Sunlite Replacement Pump Hose
$4.99
- Genuine Sunlite replacement hose - Type: Fits Sunlite #4301 : 16 5.8mm"
Sunlite Replacement Pump Hose w/Gauge
$4.99
- Genuine Sunlite replacement hose - Type: Fits Sunlite #4301 : 16 5.8mm
Park Tool Pump Rebuild Kit (for PFP-3, PFP-6, and PFP-8)
$5.90
Park Tool's Pump Rebuild Kit contains one #1081 head as well as one #1087 plunger gasket for their PFP-3, PFP-6 and PFP-8 floor pumps.
Prestacycle Safety Blower / Low Pressure Inflator Tip
$5.95
Allows you to reach into difficult places with your Prestaflator hose. Great for cleaning and drying parts on-or-off the bike. If the tip is blocked, The safety feature releases air away from your work so you can maintain control. Can also be used to inflate low pressure vinyl-valve items (beach-ball type). The safety release feature will help prevent over-inflation. Made with 6061-T6 Alloy – it’s as strong as Brass and only 1/3 the weight. Note: The safety feature is only functional when the tip is used on a Prestaflator.
Prestacycle Schrader Hose Barb
$5.95
Use it to upgrade your floor pump or tankless electric inflator to use Prestaflator heads and accessories. Made with 6061-T6 Alloy – Strong as Brass and only 1/3 the weight. Hose clamp not included. The correct hose clamp varies based upon the outer diameter of your pump’s hose.
Topeak Presta Valve Extender
$6.95
Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims. And, it comes with an O-ring seal to ensure a leak-free fit.
SKS EVA Pump Head Grommets
$6.99
Bag of 3 replacement washers for EVA heads on all SKS floor pumps
TwoFish Twofish Bikeblock Inflator Holder
$7.90
- Solution for mounting pumps and C02 inflators on frames or seatpost - Soft rubber block and Velcro loops hold pumps tightly
Genuine Innovations Tubeless Tire Repair Kit
$7.99
Want a super-easy way to fix a flat? If you have tubeless tires on your mountain bike, all you need is Genuine Innovations' Tubeless Tire Repair Kit. No interior repair is needed, so you don't have to remove the tire. Just plug the hole with the self-vulcanizing plugs, inflate and ride away. The kit includes an insertion tool and five rope plugs.
SKS Pump Adapter with Chain
$7.99
Easily adapts schrader only air compressors, floor pumps, and mini pumps to work with presta valves
Topeak Valve Tool
$8.95
A metal valve tool designed to tighten or remove Schrader and two-piece Presta valve cores. A special tool feature can also tighten or loosen Presta valve extensions. - Material: Aluminum - Schrader or two-piece Presta valve cores - Weight: 7 grams - Size: 4.5 x 1.1 cm / 1.8“ x 0.4”
Planet Bike 12g CO2 Replacement Cartridges - Threadless
$8.99
CO2 replacement cartridges Planet Bike's line of CO2 replacement cartridges make tire repairs quick and easy - Our CO2 cartridges work in Planet Bike inflators as well as most competitors' inflators - Planet Bike cartridges are tested to the highest standards for durability, safety and reliability. They contain pure CO2 with no oils or contaminantsa. - 100% recyclable steel cartridges - All threaded cartridges are compatible with Air Kiss, Red Zeppelin, Red Zeppelin 2 & Air Smith CO2 - Unable to ship to Canada
Planet Bike 25g CO2 Replacement Cartridges - Threaded
$8.99
Planet Bike's line of CO2 replacement cartridges makes tire repairs quick and easy. - Planet Bike's CO2 cartridges work in Planet Bike inflators as well as most competitors' inflators. - Planet Bike cartridges are tested to the highest standards for durability, safety, and reliability. They contain pure CO2 with no oils or contaminants. - 100% recyclable steel cartridges - All threaded cartridges are compatible with Air Kiss, Red Zeppelin, Red Zeppelin 2 & Air Smith CO2
Sunlite Steel Frame Pump
$8.99 - $9.99
Sunlite's Steel Frame Pump looks great on retro frames and modern road steeds alike. Its long steel barrel makes pumping up tires a breeze. And, it comes with mounting clips if your frame doesn't have a pump peg or your top tube isn't quite the right length.
Sunlite Single Action Mini
$9.89
- High effeciency design - Lightweight composite construction - Thumb lock release - Reversible Presta/Schrader with bracket
Prestacycle Spin Head Hose
$9.95
Braid-reinforced PVC hose is stronger than Prestacycle's original Black hose from a few years ago, and also twice flexible! Schrader Spin-on head accepts all Presacycle Head, new and old. 200 psi working pressure, 13 inches length. Uses standard 1/4" threads. Non-marring and resistant to moisture, fungi, oil, fuel, and grease as well as abrasion, impact, and tearing. Operating temperature range is from -30° to +125°F. Fits all previous Prestaflator tools, o-ring included.
Topeak Presta Valve Extender XL
$9.95
Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims that have a depth of 60 to 90mm. And, it comes with an O-ring seal to ensure a leak-free fit.
Page 1 of 6 Next page