Giant's Giant Toe Straps are made of durable nylon with chrome-plated steel buckles. The ends of the buckles are rubber-tipped to be easy on your fingers when you're adjusting the strap tension on rides.
- Plastic nylon molded body - Chromoly spindle - 318g pair
- One-piece nylon body - Chromoly spindle - Toe clip compatible - 407g pair
Pre-cut traction tabs designed to integrate with the Highline remote lever and increase grip for ultimate control.
Replacement straps for Sunlite FlatForm II pedals - Strap size: 340 x 55mm
- One-piece ABS resin body - Molded pins - 320g pair
Polyurethane pads with diamond plate traction pattern allow riders to customize their pedals for a perfect interface with any shoe. - Kit includes eight 1mm traction pads and eight 2mm traction pads
Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes. - Sold in pairs
Crank Brothers' Tread Contact Sleeves shim the area between the pedal and your shoes' tread so there is no rocking or play when you're clipped in. They provide a solid platform to put down all your power! They work with either your Eggbeaters or Candy pedals, and each includes 1mm, 2mm, and 3mm shims.
IGUS Bushing replacements for your Spike or Oozy pedals help to eliminate any play that develops over time, and revive smooth spinning action. - 2pcs IGUS self lubricating bushing - 2pcs O-ring - 2pcs stainless shim washer
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms. - Includes 10 washers
- One-piece resin body with rubber surface for grip - Boron spindle - 400g pair
Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers. - Compatible with Exustar cleat C01, C03, and C05 - Durable and flexible rubber - Can be used with either floating or fixed position cleats - Weight of only 14 grams/pair
Crank Brothers' 5050 Pin Kit includes fifty 8mm-long steel pins that let you customize the traction on your 5050 or Mallet pedals. Thread lock is pre-applied to every pin.
Dimension Toe Clips and Straps Set. Includes: - 4 bolts - 4 nuts (washers included) - 2 nylon toe straps - 2 toe clips
Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers. - Compatible with Look Keo System - Durable and flexible rubber - Can be used with either floating or fixed position cleats - Weight of only 45 grams/pair
- One-piece resin body - Juvenile size platform - Boron spindle - 390g pair
$13.99 - $23.99
One of the most successful and popular pedals, and for good reason with its extremely simple, lightweight, inexpensive and famously durable plastic-bodied design. Often duplicated but never replicated. - High-strength plastic composite
Giant's AC Toe Clips and Straps includes two durable chrome-plated steel clips, mounting hardware and a pair of quality leather straps with chrome-plated steel buckles.
- SPD compatible - Single release - Hardware included
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer. The kit includes: - 8 × 1mm traction pads - 8 × 2mm traction pads Compatible with: - Candy 7 & 11 - Model years 2016 – present
The Keo Cover protects your cleats while walking. They are compatible with all Keo Grip cleats and Keo Cleats. – Cleats protection – Anti-slip – Compatible with all cleats
- Replacement cleats for X-Track pedals
- The X-TRACK EASY CLEAT offers a larger clip out range with a lateral and angled release possibilities
$15.19 - $16.99
- Fits most MTB shoes - For clipless SPD-style pedals - 4-degree float
- NJS/Keirin certified chrome plated steel clips for single toe strap - Hardware included
- Nylon construction - Intended for use with double-strap toe straps (sold separately) - Includes mounting hardware - 36 grams per pair
- Extend the life of your iSSi Thump pedals by replacing beat-up or missing pins with the Thump Replaceable Pin Kit. - Includes 36 steel pins and 2mm spacers to replace both sides of two pedals - The standard pin height out of the box is 3mm with a 2mm spacer. For more traction, remove the spacer under the pin head to increase pin height to 5mm.
Shimano's SM-SH56 Multi-Release Cleats disengage with less effort and in more directions than standard SPD cleats. - Not compatible with Shimano PD-M858 (XTR) SPD pedals
The new Shadow Surface Pedal is made with performance and function in mind. Starting with a wider and longer, slim platform. The wide 105mm x100mm platform is specifically shaped to be thin and stiff while still offering an overall concave shape. Added advanced micro-knurling and 12 pins per side for a maximum grip that still allows foot adjustments mid-shred. Made with the same proven nylon-composite material as the Ravager pedal, with a heat-treated chromoly axle that includes a 6mm broach for ease of installation and high-end looks. - Injection-molded nylon-composite body - Heat-treated 4140 chromoly broached spindle - 105mm length x 100mm wide - 3.5mm pin height - 12 pins per side - Thickness: 18mm and 24mm at bearing cover - 9/16"
Page 1 of 5 Next page