GNT Axact Cadence Magnet Product description - Wheel magnet compatible with round and bladed spokes - Cadence magnet includes zip ties
GNT CR2025 Lithium Computer Battery - Sold individually
Get the most out of your ride with the addition of speed and cadence. Whether you are a weekend warrior or data junkie we’ve got you covered. Features - Sensor magnet kit for RideSense speed and cadence sensors Kit includes: - RideSense speed magnet - RideSense cadence magnet
The K-EDGE co-polymer insert for Garmin 1/4 Turn style computers is a replaceable item. While it is extremely strong, we designed this insert to fail on a significant impact before the tabs on the back of the Garmin break. - Qty 1 – K-EDGE Co-polymer Insert for Garmin 1/4 Computer (Part No. K13-503) - Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws
Replacement plastic insert kit for K-EDGE Wahoo Mounts. The co-polymer insert for Wahoo 1/4-turn style computers is a replaceable item. While it is extremely strong, it is designed to fail on a significant impact before the tabs on the back of the Wahoo break. Attributes (specs): – Qty 1 – K-EDGE Co-polymer Insert for Wahoo 1/4 Computer (Part No. K13-1604) – Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws
Replacement magnet for MSW Miniac Double Speed & Cadence computers. Includes water-resistant cadence magnet and four plastic zip ties for mounting to pedal crank arm.
The MSW Computer Spoke Magnet is designed to fit round and bladed spokes of various diameters. - Tool-free installation - Alloy construction - Fits round and bladed spokes
The QuickView was designed to put the Garmin Edge Computer out in front of the stem. Fits Garmin 605 and 705. - Glass-filled nylon, stainless steel Torx T25 bolt - Weight: 20g
The H-34 Flex-Tight Bracket is an OEM handlebar bracket so you can attach Cateye accessories. It fits all handlebars up to 32mm in diameter.
Sigma Sport's Cadence Power Magnet is the correct replacement magnet for any Sigma Sport computer featuring cadence (computers sold separately). It attaches to your crankarm with zip ties and double-sided tape (both included).
Handlebar and Stem Bracket Band and Bracket for your Strada Wireless, Strada Double Wireless, Urban Wireless, Micro Wireless, Commuter, and Adventure. The FlexTight Kit Wireless system is the full kit for your CatEye wireless computer mounting needs.
GNT Axact 13W Replacement Mounting Bracket Product description - Includes mounting bracket and zip ties
GNT Axact Pro+/Pro Mounting Bracket Product description - Includes mounting bracket and zip ties
The Under Stem Mount allows riders to secure a Shimano Di2 Junction Box to their bike quickly and easily without the need for zip ties, duct tape, or other unreliable attachments. - Lightweight alloy headset spacer with nylon body (9g) - Compatible only with Shimano Di2 Junction Box - 95mm length, 44mm width, 6mm height - 6 Degree angle
Keep your computer where you can read it with Delta's stem bolt-mounted Computer Caddy. It provides a mounting point for awkward or crowded bars. - Mounts securely using the stem bolt - Adds a space to mount up to two devices - Weight limit of 125g (0.28 pounds) per side
Power Spoke magnet for all Sigma computers. Fits round and bladed spokes.
Heavy-duty harness for Miniac 7-function computer.
Profile Design's UCM Universal Computer Mount provides a convenient 25mm long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.
Replacement mount tray for Giant/Liv computers
GNT Axact 6 Wired Mount Kit w/ Speed Sensor & Magnet Product description - Kit includes mount, sensor and magnet
• To position the Shimano Di2 battery inside the fork steerer • Including stainless steel tool to remove the set.
Wire harness and hardware to measure computer data based on the front wheel. - Fits most bars bars (25.0 to 31.8mm), 86cm wire, wheel magnet (fits up to 4mm bladed spokes) and zip ties - Compatible with: Protege 5.0, 8.0 and 9.0
Wire harness and hardware to measure computer data based on the rear wheel - Contains bracket with 130cm wire, wheel magnet (fits up to 4mm bladed spokes) and zip ties - Bracket fits most bars (25.4 to 31.8mm) - Compatible with: Protegé 5.0, 8.0 and 9.0 - Ideal for rear wheel indoor bicycle trainers
GNT Axact 9/11 Replacement Mounting Bracket Product description - Includes mounting bracket and zip ties
Handlebar mount to fit Miniac 322 and 333 GPS computers. Fits up to 31.8mm round handlebars. Plastic construction with rubber shim. - Keeps handlebar clean - Adjustable height angle for better visibility during riding - Simple one bolt attachment
With aerobars, short stems and hydration systems crowding the front end of your bike, it's hard to mount a computer. But, with Xlab's Aero Computer Mount Gen 2 you can mount your computer to your stem cap! It's aero because it fits neatly behind aero drink systems and horizontally mounted bottles, and the extra height of the mount makes your computer easier to read. It can also be mounted on the Xlab Torpedo Mini Mount, placing your computer in front in your line of sight. • The Aero Computer Mount, re-designed! Aerodynamically designed and longer to support larger screen computers • Mount in front of Torpedo Systems or on stem bolt • Helps reduce drag from a computer mount with one that was designed with aerodynamics in mind • Mount in front of TORPEDO SYSTEM (sold separately) for optimum viewing. • Mount on stem when using non-XLAB drink systems (sold separately) • Easy to read when in aero position • Fits most computers including the new longer form factor models (sold separately) • Mount is 37 mm wide. Plenty of room to support the popular Garmin computers (sold separately) • Includes hardware and instructions • Weight: 29.5 grams
- Use to keep Blips in place on handlebars - Fits 31.8mm round portion of drop bar - Clamp mounts directly to bar outside of tape zone - Ideal for use with thumbs or index fingers while hands are on the tops - Right and left specific, just like Blips - Weight: 12 grams (for pair) - Material: Polypropylene - Compatibility: 11-speed - Recommended Group: SRAM RED eTap
• When aerobar space is tight, place your computer on top • Tuck straw on either side for best aerodynamics • Fits on TORPEDO SYSTEM 100, TORPEDO SYSTEM 400 & REFILL UPGRADE KIT BOTTLES (each sold separately) • Compatible with most computers, including large screens (sold separately) • Glass-reinforced nylon • Weight: 18.5 grams
Features - Mounts underneath Contact SLR Aero Integrated handlebars - Adjustable length - Alloy construction - Hardware included
Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 27mm-35mm diameter
Page 1 of 5 Next page