Other

• Converts Braze-on front Derailleurs to clamp on • Lightweight forged alloy • Weight: 28g

Converts CenterLock hubs to accept 6-bolt rotors - Available for standard Quick Release as well as Thru-Axle hubs - Extruded alloy collar with CNC shoulder pins and lock ring - Eliminates the need for rotor bolts

Origin-8's Carbon Fiber Headset Spacers are made of lightweight, durable carbon and come in 5mm, 10mm or 20mm thicknesses. You get a bag of five spacers.

- CNC-machined chromoly steel lockrings - 1.29" x 24tpi LH

Origin-8's Quill Adapter allows you to use modern threadless stems on bicycles with threaded forks that take quill stems (stems with bolts in the center). The Quill Adapter is made of light and durable 7075 aluminum and features a chromoly bolt.

Ditch the zip ties and clean up the look of your cables with Origin-8's Clamp-on Cable Stop. Available in a variety of diameters for different sized round frame tubes, the cable stop bolts on and provides a channel to run rear brake or derailleur housing to hold it securely in place. It's made of lightweight CNC'd aluminum.

Axle Adapters for use with MT-3100 series hubs - Aluminum alloy shells resist corrosion and provide lightweight longevity - Sealed cartridge bearings offer smooth operation while resisting contaminents - 15mm Thru Axle, 6 bolt disc compatible in boost and standard configurations - Spacing/Axle: 12TA 142mm

- Push-in replacement CNC alloy bar end plugs - MTB-specific design - Anodized alloy end caps - Compatible with most handlebar styles - 20mm OD plug/25mm OD end cap (Road) - 20mm OD plug/30mm OD end cap (MTB)

- AL6061 alloy construction - Non-keyed design - Jar of 40 spacers

Chrome plated heat treated bolt - Forged steel conical wedge - For 1-inch steer tubes

- Replaces existing top cap, and allows the use of a bottle cap as a decorative cover - Compatible with both twist off and crimped style bottle caps - Bottle cap is held in place by two strong magnets - Easy to switch out bottle caps - AL6061 alloy cap and AL7075 alloy bolt

- AL6061-T6 alloy quick-release seatpost clamp with CNC machined cut-outs - Stainless steel bushing ensures smooth lever action - Rounded edges and floating bolt/ovalized hole design protects carbon frames and seatposts - 29.8mm for 27.2mm seatpost and chromoly frame - 31.8mm for 27.2mm seatpost and aluminum frame - 34.9mm for 30.9mm seatpost and aluminum frame, or 31.6mm seatpost and carbon frame - 16mm height

Origin-8's 1-inch Headset Spacers are made of lightweight and durable aluminum and come in 2mm, 5mm or 10mm thicknesses. You get a bag of 10 spacers.

• Fits 3/8" Axles • Lightweight, compact design • Forged aluminum construction • Chromoly bolt

• Converts a cassette hub to a single speed • 8 spacers included in various sizes to adjust chain line • Anodized 6061 aluminum • Fits Shimano/SRAM cassette bodies • Conical spacers for increased cog stiffness • Includes single-speed guide, spacers, as well as 18T & 16T cogs

- AL6061 alloy construction - Non-keyed design - Jar of 10 spacers

Origin-8's Capster is a top cap, bolt and star nut for your 1 1/8-inch threadless headset. It comes in many colors so you can customize your ride.

- AL6061-T6 alloy seatpost clamp - Rounded edges and floating bolt/ovalized hole design protects carbon frames and seatposts - 28.6mm for 25.4mm seat post and steel frame - 29.8mm for 27.2mm seat post and chromoly frame - 31.8mm for 27.2mm seat post and aluminum frame - 34.9mm for 30.9mm seat post and aluminum frame, or 31.6mm seat post and carbon frame - 16mm height

Standard replacement star nuts for threadless steerers.

Lightweight aluminum alloy - Non-Keyed - Height: 20mm - 10 to a bag

- Provides enhanced chain retention for all 1x drivetrain systems - CNC-machined AL6061 alloy mount with dual-compound chain guide - Co-molded composite and TPR guide plates greatly reduce noise from chain contact - Compatible with 28-38T circular and 26-36T oval chainrings - Boost-compatible - Easily adjustable - Mounting hardware included

- AL6061-T6 alloy quick-release seatpost clamp - Stainless steel bushing ensures smooth lever action - Adjustment knob allows for on-the-fly fine-tuning - Rounded edges and floating bolt/ovalized hole design protects carbon frames and seatposts - 28.6mm for 25.4mm seatpost and steel frame - 29.8mm for 27.2mm seatpost and chromoly frame - 31.8mm for 27.2mm seatpost and aluminum frame - 34.9mm for 30.9mm seatpost and aluminum frame, or 31.6mm seatpost and carbon frame - 16mm height

Replacement brake hoods for Origin8 Classique Sport road levers

- AL6061-T6 alloy seatpost clamp with CNC-machined cut-outs - Rounded edges and floating bolt/ovalized hole design protects carbon frames and seatposts - 29.8mm for 27.2mm seatpost and chromoly frame - 31.8mm for 27.2mm seatpost and aluminum frame - 34.9mm for 30.9mm seatpost and aluminum frame, or 31.6mm seatpost and carbon frame - 16mm height

Connecting links for Origin8 chains

Nylon fiber OS adapters are designed for use in frames with worn-out, oversized bottom bracket shells - Replaces standard nylon fiber overmolds found on Origin8 Revolvr BB30 and PF30 outboard thread-together bottom brackets - Use BB30 OS adapters with Origin8 Revolvr BB30 outboard thread-together bottom brackets 211051 and 211052 - Use PF30 OS adapters with Origin8 Revolvr PF30 outboard thread-together bottom brackets 211053 and 211054 - Requires a special installation/removal tool (P/N# 610817) - Shell: 68/73mm x 46~46.1mm - Interface: PF30 - Cup Material: Nylon Fiber

Origin-8 1mm Disc Brake Washers. Works with most disc brake calipers. Ideal for mounting/spacing applications. - Stainless steel - 6mm I.D. - 10 per bag

• 6061-T6 tubular aluminum construction • Laser etched graphics • Independent arm rest and bar adjustment • Does not include armrests • Cannot mount shifters onto ends • Clamp diameter: 25.4-31.8mm • Extension length: 105mm

- Push-in replacement CNC alloy bar end plugs - MTB-specific design - Anodized alloy end caps - Compatible with most handlebar styles - 20mm OD plug/25mm OD end cap (Road) - 20mm OD plug/30mm OD end cap (MT

Origin8's Twistr 15mm Top Cover is a high profile 15mm top cover for Origin8 Twistr Series headsets. This CNC-machined AL6061 top cover is sealed to keep moisture and grit away from the bearings.