Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

$13.00
-Seatpost clamp for Defy/Avail Advanced models (2015-2016)
$45.00
Have a current Bomber Z1 but missing that Coil Spring feel? Or, maybe you have a Bomber Z1 Coil already and want to customize its ride. Look no further. With this conversion kit, you can now convert your Bomber Z1 air fork easily to the Z1 Coil. Buy this upgrade kit and follow the install instructions (or have your bike shop swap it out for you) and you, too, will be riding the buttery-smooth Z1 Coil in no time. PLEASE NOTE: To do the conversion, you will need the Bomber Z1 Plunger & Topcap Kit.
$32.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA
$29.95
- Designed for use with MRP ISCG-05 boomerang chain guide systems - Adapts ISCG-05 compatible chain guide to fit BB-mount (flange/lockring)
$32.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA
$25.40
Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.
$19.99
Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 18307 Bearing
$18.95
Saddle Rail Clamp outer-pieces to adapt WCS Alloy 1-bolt posts to various saddle rail dimensions. - To retrofit WCS 1-Bolt alloy seatpost - Material: 7050 alloy
$18.95
Saddle rail clamp outer-pieces to adapt Ritchey WCS Carbon 1-bolt posts to various saddle rail dimensions. - To retrofit WCS 1-Bolt carbon seatpost - Material: 7050 alloy
$45.95
Replacement dropout kit for Ritchey Timberwolf frames - Includes both drive and non-drive side dropouts
$9.95
Replacement bolts for Super Logic stems. Original equipment stem hardware ensures exact fit and finish. - Replacement T20 bolts for Super Logic stems - Includes T20-M4x15L x 4pcs & T20-M4x18L x 3pcs - Bit Size: Torx 20 - Thread Pitch: M4 - Length: 18mm (x3), 15mm (x4)
$27.95
Complete clamp kit to adapt WCS Alloy 1-bolt posts to various saddle rail dimensions. - To retrofit WCS 1-Bolt alloy seatpost - Material: 7050 alloy, stainless steel bolt
$12.95
Replacement faceplates for Ritchey WCS C220 stems.
$17.95
Carbon headset spacers for 1-1/8" steerer. - For 1-1/8" steerer - 5mm thick - 5pcs per bag - 33mm OD
$131.00
Paul Components Melvin Chain Tensioner. Converts frames for single speed use. Long enough for a Dingle-setup, (2 rings, one cog) 20T max. - The Melvin uses two pulleys, just like a rear derailleur, which gives it 20 teeth of chain wrap - Will work with multiple front chain rings while maintaining proper chain tension - The pulleys are made of extruded and machined aluminum and have sealed bearings for durability - Pulleys are 2.25mm thick at the tooth which fits inside most narrow 6 through 9 speed chains, and the pulley cage is wide enough to allow 1/8? single speed chains as well - Long enough for a Dingle-setup, (2 rings, one cog) 20T max - Do not use with a coaster brake or fixed gear - Includes Paul's own Sealed Bearing Pulleys
$21.99
Converts CenterLock hubs to accept 6-bolt rotors - Available for standard Quick Release as well as Thru-Axle hubs - Extruded alloy collar with CNC shoulder pins and lock ring - Eliminates the need for rotor bolts
$18.64
Aluminum headset stack spacers precision cut to ensure proper headset function. - Precision cut for proper function
$159.99
Get ready to get fast with Vision's Team Clip-Ons. The butted-aluminum J-bend extensions are light and stiff, plus they feature fully internal cable routing. You'll also love the 3-position carbon arm rests with supportive foam pads for dialing in your ideal aero position.
$39.99
What Has Two Thumbs and Rallies? This guy! The Aeffect R 1X Seatpost Lever delivers big time hassle-free height control. Designed to eliminate any excess bells and whistles that might fail, this lever gets the job done so you can focus on everything else. Skip The Slip Textured no-slip thumb pad helps your butter thumbs hit the lever right every time. Feels So Good No one has ever gotten carpal tunnel from a dropper lever and we aim to keep it that way. Ergonomically designed for 1X set-ups under your bar.
$64.99
Pro Compressionless brake housing eliminates flex from cable actuated braking systems, increasing power and improving lever feel. - KEB-SL - linear strand, Kevlar reinforced, compressionless brake housing with Slick-Lube liner - Perfect for full-housing, high-performance bikes with mechanical disc or rim brakes - 20 black alloy lined end caps, 10 black POP end caps included
$24.99 - $30.99
Origin-8's Carbon Fiber Headset Spacers are made of lightweight, durable carbon and come in 5mm, 10mm or 20mm thicknesses. You get a bag of five spacers.
$21.99
- Replacement padded arm rests for clip-On Tri-Bar II - Easy clip on installation fits most road bars - Clamp Size: 22.2mm
$1.99
HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal
$9.99
• Quick-release seatpost clamp • Aluminum lever and cap with a 6mm chromoly bolt
$30.99 - $61.99
Sport brake housing packs high performance features into a colorful and durable package, making it a functional and aesthetic upgrade. - Slick-Lube lined housing reduces friction for faster cable movement and better braking response - High carbon internal steel coil for improved stiffness - Appropriate for Teflon coated cables as well as steel and galvanized - Length: 10m
$14.99
Thermalite material molded into a guard that will protect your Sumo sprocket. Super-strong Chromoly bolts keep this thick guard in place. - Material: Stolen's Thermalite (Nylon w/Long Glass Fiber) - Thickness: 7.75mm - Sizes: Fits 25 tooth Sumo III - Colors: Black - Weight: 2.5 oz
$12.99
- CNC-machined chromoly steel lockrings - 1.29" x 24tpi LH
$10.00
Protective pad for your chainstay prevents damage and scratches. - Soft pad with Race Face logos
$15.00
FSA Compression Plugs are top assemblies for carbon steerers. Replaces the traditional top cap assembly. Includes cap, bolt, and expander. - Includes cap, bolt and expander - Top assembly for carbon steerers replaces traditional top cap and star nut assembly
$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 40mm (1-1/2") tapered steerer tubes - Lightweight aluminum construction
$32.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA
$34.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA
$6.00
ZIPP Service Course Bar End Plugs, Qty 2.
$30.00
Precise spacers keep your headset tight, and provide correct bike handling and component life. Lightweight and precisely parallel, Zipp carbon headset spacers are precision ground to keep your fork secure through every twist, turn and bump in the road. 1-1/8-inch diameter in 4, 8, 12, and 30 mm heights.
$298.00
- Includes 61803 bearings and one grease syringe - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings - These 61803 bearings are not interchangable with the 88/188 hub 61803 bearings
$6.00
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with KMC and Shimano 10-speed chains - Includes 2 pairs
$8.00
This replacement Shimano bar-end shifter segment unit is the expansion core that goes inside the handlebar. These can become damaged in a crash or during installation or uninstallation.
$11.00
Shimano Deore XT M8000 chainring bolts. - Color: Black - Material: Aluminum - Type: Torx
$9.00
- Replacement chain pins for Shimano 11-speed chains - Compatible with CN7900/7801 chains - 3 pins per pack
$24.00
Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.
$13.23
Replacement EBT screws close the bleed port on Magura brakes. - Torque spec: 0.5 nM - T25 head
$22.05
Loose ball bearings in bags or bottles. - Replacement loose ball bearings
$32.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA
$29.99
- 3-piece expander design provides a secure fit within carbon steerer tubes - 22-25mm range of expansion - Extra-long 90mm height reinforces carbon steerer tube beneath the stem - New design evenly distributes headset compression forces - Lightweight AL6061 alloy construction - Top cap and bolt not included - 1-1/8-inch steerer diameter
$11.00
- Width: 5.8 mm - Drivetrain Speeds: 11 - Color: Silver - Reusable: No
$171.00
The Sonic/Ergo is designed to present minimal frontal area to create as little aerodynamic drag as possible. The main purpose of an aerobar is, of course, to get the rider into a fast position. Despite a fairly minimalist appearance, the Sonic/Ergo offers a comprehensive fit range for exactly this purpose. - Armrest Offset: -70mm to -2.5mm in 7.5mm steps - Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm) - Armrest Stack: 60mm to 70mm in 5mm increments (with aftermarket Riser Kit) - Extension length and rotation can be easily adjusted using the top bolt - Weight: 545g
$37.00
Replacement extension tower for Zipp aerobars. Compatible With: - HB-VK-STLH-A1
$79.99
A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks - Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP - Compatible with Fox coil shocks with required spring clip adaptor
$48.00
One of the single biggest improvements you can make to your fork. Engineered and developed over several years, the PUSH Ultra Low Friction fork seals provide class leading sealing while offering incredibly low friction, resulting in an increase in small bump sensitivity. - Advanced friction-reducing, Molybdenum filled material increases small bump sensitivity while also increasing durability - Dual scraping lip design provides maximum scraping effect while minimizing friction - Loaded oil sealing lip integrated into wiper to keep lower leg fluid from escaping fork, increasing performance and durability - High-volume, absorbent foam rings ensure consistent lubrication improving seal life and bump sensitivity - Molded utilizing precision 3D machined molds for exact tolerance
$34.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA
$36.99
- Superior sealing performance across a wide range of aftermarket applications - Integrated dust sealing lip is designed to guard against dirt and water entering fork preventing contamination and increasing performance - Integrated oil sealing lip preve
$334.00
Transform your existing Fox 36 suspension fork into the ultimate trail fork. The ACS3 coil conversion kit combines small bump sensitivity, traction, and mid stroke support of a coil with the big hit performance of an air spring. By using coil springs, you can eliminate the constant maintenance required to keep your fork running optimally! - Reduced friction for smoother overall fork performance - Air Bump Stop cartridge technology to control the bigger hits towards the end of the travel
$97.00
Paul's dropper trigger with stacked dual sealed cartridge bearings, two different cable clamp options, a barrel adjuster, and a hinged clamp. - Dual stacked sealed cartridge bearings in the pivot for zero slop and long (serviceable) life - Pinch bolt and cable head recess allowing you to run the cable in either direction - Hinged clamp so you can install it without removing the grip - Barrel adjuster for fine tuning the cable tension
$8.90
Replacement small parts for Hope disc brake Hope disc brake calipers.
$8.90
Replacement small parts for Hope disc brake Hope disc brake calipers.
$30.35
Hope Tech 4 lever blades are a perfect fit as a replacement or for those that desire a customized look. - Made from high quality precision CNC machined aluminum - Durable anodized finish - Only compatible with Hope Tech 4 brake levers - Adjusters and hardware is NOT INCLUDED
$30.35
Hope Tech 4 lever blades are a perfect fit as a replacement or for those that desire a customized look. - Made from high quality precision CNC machined aluminum - Durable anodized finish - Only compatible with Hope Tech 4 brake levers - Adjusters and hardware is NOT INCLUDED
$15.00
Replacement top caps for various RockShox suspension forks. -32mm steel upper tubes only