Filter By:
- Show More Brands
- Show Fewer Brands
Handlebars

$158.00
Whisky's No.9 Riser Bar features a 25mm rise and a 5-degree upsweep to offer a slightly more upright riding position that increases control and comfort. It’s wide, sleek, and tested to the highest standards to deliver a ride you can trust mile after mile. Trimmable ends allow you to really dial in your fit to keep you comfortable every time your tires hit the dirt or snow.

$109.95
The evolution of Ritchey handlebars continues with the WCS ErgoMax. This new bar enjoys a rich history of handlebar design and development and combines it with the modern demands of discerning riders who enjoy riding varying surfaces.
Designed to enhance control and comfort when riding along loose surfaces, the ErgoMax is ideal for a gravel bike since it places the hands in a wider, more stable position while in the drops. The ErgoMax is just as perfectly situated on road bikes that are built for endurance, its ergonomics delivering unparalleled comfort.
The bar tops employ a 10mm rise at the clamping area, which offers a slightly more upright riding position. They are then ovalized and have a slight 4-degree rearward sweep to more evenly distribute the weight of the rider's hands and wrists, also putting them in a more natural position.
Continuing with an eye towards ergonomics, the ErgoMax also features drops with a nice, 12-degree flare to keep the rider's hands in a comfortable and confident position, while also adding a bit more unobstructed stability when turning or sprinting.
The new Ritchey ErgoMax bar delivers more control, welcome comfort, and increased confidence when riding gravel, setting out on multi-day adventures, or rolling along those long miles of tarmac.
- Material: triple-butted 7050 alloy
- Bend style: compact
- Top style: flat
- Drop: 128mm
- Reach: 73mm
- Drop flare: 12°
- Flare out: 3°
- Backsweep: 5°
- Clamp diameter: 31.8mm
- Accessory mount diameter: 31.8mm
- Other features: drilled at bar end for Shimano Di2 EW-RS910 junction box routing, C260 compatible
- Clip-on compatibility: no
- Other features: C260 not compatible
- Weight: 270g (42cm)

$54.99
Your rock-steady set and forget road bar. Only a few grams heavier than the EA70 and sporting the same MCD drop technology as our top of the line road bars. These budget friendly bars will leave you comfortable in the saddle all day without breaking the bank.
- Finish: Black Ano/Water Transfer Graphics
- Bar weight: 315g (42cm)
- Clamp diameter: 31.8mm
- Width (center-to-center): 38cm, 40cm, 42cm, 44cm, 46cm
- Reach: 80mm
- Drop: 125mm
- Materials: EA50 alloy

$21.99 - $49.99
- Clamp Size: 7/8-inch
- Width: 27.5-inch
- Rise/Reach: 8.25-inch
- Type: BMX
- Material: Steel

$230.00
The No.9 24F carbon drop bar is designed for comfort and control in challenging situations. Specifically aimed at long-distance touring, gravel, and off-road pursuits, the 24-degree flare offers huge control from the drops. The carbon construction provides a light, stable platform that reduces vibration and adds comfort, plus a new carbon layup that better accommodates clamping forces of modern controls. This thoroughly modern drop bar is the perfect match to your off-road tourer, monster cross bike, or get-rad CX rig. The 24F’s sleek design offers a seamless transition between positions. Available in a broad size range, there’s a width to perfectly fit your needs.

$32.99 - $48.99
- Heavy duty steel construction
- Variety of rises offered
- Due to size some of the larger handlebars are freight intensive

$129.99
- 12° moderately flared, medium width drop bar balances off-road performance, with on-road aerodynamics and comfort
- Vibrocore foam core reduces transmission of harmful frequencies of vibration, and increases bar fatigue life and ultimate strength
- Short 110mm drop and 65mm reach geometry is perfect for aggressive riding stance and long days in the saddle on mixed terrain
- 31.8mm bar clamp zone, and aerodynamic ergo top section enhances hand comfort over longer rides, without limiting range of rider/hand positions
- 21.6mm inner diameter barends, allow use of most barend shifters
- KEY TECHNOLOGIES: Vibrocore, On-Off Road Geometry
- MATERIAL: Zirconium Doped 7-Series Alloy
- WIDTH HOOD TO HOOD (c-c): 420 / 440 / 460mm
- WIDTH BAREND to BAREND (o-o): 498 / 518 / 538mm
- WEIGHT: 355 / 360 / 365g
- DROP / REACH: 10mm / 65mm (all sizes)
- BAR CLAMP / TOP SECTION: 31.8mm Ergo Profile
- FLARE: 12°
- RAMP: 14°

$44.99
Origin-8's MX Mini Urban Handlebar is made from lightweight, durable 6061-T6 aluminum. It provides a 75mm rise and a 600mm width, along with moto styling.

$34.99
Dimension Road handlebars are available in 25.4 and 26.0mm clamp diameters and have double grooves for cable routing.

$85.99
Ergonomic off-road drop handlebar great for gravel riding. Extended OS center provides extra comfort and more room for handlebar accessories. Multiple riding positions give you more options for long miles in the saddle.
- Double butted AL6061-T6 construction
- 620mm drop width / 480mm top width
- 40-degree flared drops for improved comfort, control, power, and stability
- Accepts bar end shifters
- Clamp Size: 31.8mm
- Width / Length: 620mm
- Rise / Reach: 76mm
- Upsweep / Drop: 110mm
- Back Sweep / Bend: 5-degree
- Material: AL6061

$249.99
Easton’s new AX series line of bars meets the needs of the growing drop bar adventure and gravel segment. Building off the highly successful and critically acclaimed line of new MCD road bars and EA70 and EC70 AX bar utilizes the same top shape and reach as well as the ergonomic drop shape but turns up the drop flare from 4 degrees all the way up to 16 degrees. The wider stance in the drops provides more control on rough terrain and long gravel assaults. Why 16-degrees? Based on extensive testing and rider feedback we determined that 16 degrees was the perfect balance of maximum bar flare that still allowed for efficient access and usage of the shifters and brakes in both the hoods and drops.
- Width (center-to-center): 40cm, 42cm, 44cm, 46cm (+68m at drops)
- Flare: 16-degrees
- 42cm: 220g
- Clamp diameter: 31.8mm
- Reach: 80mm
- Drop: 120mm
- Materials: EC70 carbon

$99.99
The EA70 is Easton’s top-end aluminum handlebar with traditional, round tops. The EA70 is given an upgrade with the new MCD shape technology, with grooves for brake and gear cable routing. This race-proven handlebar has won numerous Cyclocross Nationals titles and benefits from all of the aluminum construction techniques that Easton is famous for — including TaperWall technology.
- Weight for 42cm bar (grams): 280
- Bar Drop (mm): 130
- Drop Bend Style: Compact
- Bar Reach (mm): 80
- Material: Aluminum
- Bar Top Style: Round

$32.19
Bored hands make bad rides, mix it up with some drop bars so you have positions aplenty! Duck into the drops and out of the wind if you're feeling aggro, relax and ride the tops if you're just taking a cruise or, add some hoods, and get out over the front wheel. The choice is yours.
- Classic style drop bars perfect for getting a more aggressive riding posture on your fixie or road bike
- Designed by us and perfect for any 25.4mm clamp, these puppies taper to 22.2mm for mounting all your lights, computers, etc... Race on.
- 40cm/400mm width with a 138mm drop

$200.00
- Unidirectional carbon fiber riser bar with 35mm stem clamp area
- Downhill strength with 25% weight savings compared to aluminum

$54.95
The ergonomic evolution of Ritchey handlebars continues with the ground-breaking Comp Beacon. The most notable feature is its super-wide 36° drop flare. Aside from the unmatched ergonomic comfort and stability afforded by this wide flare, it also allows for plenty of space for handlebar packs.
When riding in the drops, the Beacon doubles down on comfort with a very shallow 80mm drop and a shorter than usual reach. The Evo-style top section offers broad support for your hands, and it has a gentle backward sweep for a more natural hand position when riding the tops.
The unconventional aesthetic of the Comp Beacon belies its comfort and practicality. Taking inspiration from the randonneur world, the Beacon allows an easy transition of the hands around the bar without upsetting bike handling when loaded with gear. The gentle change of hand position allows the body to stretch and move while keeping the bike stable.
Ideal for adventure touring and bikepacking, on asphalt or gravel trails—or even for urban riding—the unique Comp Beacon brings a whole new level of comfort and control.
- Material: double-butted 6061 alloy
- Bend style: bio-bend
- Top style: ergonomic
- Width: 400, 420, 440, 460mm
- Drop: 80mm
- Reach: 65mm
- Drop flare: 36°
- Flare out: 6°
- Backsweep: 4.5°
- Clamp diameter: 31.8mm
- Accessory mount diameter: 31.8mm
- Compatible with Shimano EW-RS910 junction box
- Clip-on compatibility: yes
- Other features: drilled at bar end for Shimano Di2 EW-RS910 junction box routing, C260 compatible
- Weight: 300g (420mm)

$54.95
For riders looking for the perfect fit or a little more comfort miles into a gravel ride, the ErgoMax features an anatomical shallow drop mated with 25mm of rise for an unsurpassed ride quality
- Bar Clamp Diameter: 31.8mm
- Bar Drop: 128mm
- Bar Reach: 73mm
- Bar Top Style: Round
- Accessory Mount Diameter: 31.8
- Drop Bend Style: Compact
- Cable Routing: External
- Material: Aluminum
- Clip-on Compatible: Yes
- Flare: 4.6

$176.95
- The FatBar Carbon is the ultimate DH race handlebar.
- This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption.

$33.75
The Contact XC 35 handlebar is purpose built for modern XC riding and racing. With a 0 rise keeping weight over the front of the bike on steep climbs, this bar combines a more traditional 9 degree back sweep with a contemporary 760mm width and 35 mm diameter for added control, stiffness and durability.
- Lightweight, optimized alloy.
- 35mm clamp diameter increases strength and maximizes durability .
- 9 degree back sweep with 0 degree rise optimal for modern XC action.

$98.00
- Super wide 800mm Enduro/Freeride/Downhill riser bar
- Custom drawn 7000 series alloy provides highest strength to weight of all Chromag bars

$28.99
- Gull-wing handlebar for your classic cruiser needs
- Add a touch of elegant simplicity to your next restoration project
- Fits single stems
- 1"(25.4mm) clamp, gentle 3" rise, 26" wingspan
- Handmade in Maysville, Kentucky

$118.00
The Service Course SL-80 provides comfortable and efficient positions on the bar tops, brake hoods, or down in the drops. The bar allows a neutral wrist position on the drops and a flat brake-hood transition. This minimizes the need for up-rotated bars. Drops are angled outward by 4 degrees, reducing wrist strain. Named after its 80mm reach to bring the hoods and control levers back where you want them. The ergonomic 125mm drop places the angled drop position where you can easily reach it while maintaining a neutral wrist angle. The SL-80's rounded bar top is clip-on compatible. Forged from lightweight 7075 aluminum.
- Distinctive Zipp cosmetics
- 7050 Aluminum
- 80mm reach/125mm drop designed to fit a large number of riders
- Clip-on compatible
- Lifetime warranty

$180.00
For the ultimate in comfort and control over long distances, our all-carbon Scully Bar pairs a 5-degree upsweep with a 23-degree backsweep. Featuring an elegant forward bend before sweeping back again, its easy, natural hand position inspires confidence. It’s also blissfully wide, offering loads of real estate up top for mounting lights, bags, bikepacking gear, and more. ISO tested for harsh terrain, the Scully Bar is a sleek and stiff upgrade for paved commutes and whatever off-road riding you’re into — gravel, XC, singletrack, and beyond. Offered with 20mm of rise in two trimmable widths, the ideal fit is out there.

$37.99
Origin-8's aluminum Stash Bar II handlebar will be right at home on your fixie or urban steed. It's completely straight and super narrow so you can dart around obstacles with ease. The cool spherical aluminum end caps are removable if you prefer a more muted look.

$100.00
Truvativ design built in collaboration with, and featuring the creativity of, Troy Lee Designs. The Truvativ CoLab TLD bar is the command center of cornering with an artistic flair.
- Includes Rockshox sticker pack to give fork and handlebar a unified custom look
- Stiff, precise and wide
- Signature Troy Lee Designs style
- Geometry and 7050 aluminum are designed for DH and gravity events
- Back Sweep (deg): 9
- Upsweep: 5
- Weight: 349g
- Material: Aluminum

$89.99
- AL7050 tubular alloy construction
- 31.8mm clamp diameter
- 800mm width
- 7° back sweep
- ISO-Mountain safety certified
- 310-350g (Depending on rise dimension)

$44.99
Origin-8's Pro Urban Riser Handlebar is a wonderful ride companion. It's crafted from lightweight, durable 6061-T6 aluminum and delivers a heads-up 50mm rise that's great for keeping an eye on your surroundings. At a skinny 560mm wide, you'll have no trouble picking your way through town. And, it comes in a variety of colors to make sure your ride is the sharpest on the block.

$89.99
- Gravel racing-inspired off-road drop handlebar
- Double-butted AL6061-T6 construction
- 610mm drop width / 460mm top width
- 35° flared drops for improved comfort, control, power, and stability
- Extended 31.8mm bar bore provides ample room for accessories and clip-on bars
- Offers multiple hand positions to address long miles and varied terrain
- Accepts bar-end shifters
- ISO-Road/Mountain safety certified