Filter By:
- Rigid (88)
- Suspension (98)
- Show More Brands
- Show Fewer Brands
Forks

$99.99
- Hi-Tensile steel construction
- 135mm fat tire front hub spacing
- Steerer Type: Threadless
- Steerer Size: 1-1/8-inch
- Steerer Length: 275mm
- Brake Mount: Is Disc
- Rake: 45mm
- Axle-to-Crown: 450mm
- Race Diameter: 30mm
- Axle: QR 9mm

$79.99 - $89.99
• Caliper brake mounts
• 385mm axle-to-crown
• Chromoly construction
• 1-inch steerer diameter
• Threaded fork

$109.99
• Cantilever brake mounts
• 45mm rake
• Chromoly construction
• 1-inch steerer diameter
• 200mm steerer length
• Threaded fork

$59.99 - $65.99
• Cantilever brake mounts
• High-tensile steel construction
• Threaded fork
• Steerer diameter: 1-inch
• Steerer length: 200mm
• For bikes with 26-inch wheels

$790.00
- 35mm chassis at home on the trail - stiff, playful, and light, really light
- Charger RC damper featuring Low Speed Compression adjust
- DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep.
- RockShox premium short fender included
- Maxima Plush damping fluid reduces friction and silences damper noise

$612.00
One of the most successful and hard-working RockShox forks of all time capitalizes on the innovations born from SID. It features a chassis that combines classic XC performance with light trail duties, while a Motion Control damper completes the package, making Reba more capable than ever before.
Features
- New graphics package for a fresh, premium look
- Highly tunable Solo Air spring
- TwistLoc and OneLoc remote compatible

$89.99 - $99.99
• Caliper brake mounts
• 45mm rake
• Chromoly construction
• Threadless fork
• 300mm steerer length

$339.99
- Monark style linkage fork for vintage cruisers
- Full chromoly construction
- Disc or Drum brake mounts (160mm Max rotor)
- Size: 26"
- Rake: 57mm
- Axle-to-Crown: 417mm
- Axle: 3/8"
- O.L.D.: 100mm

$1,049.00
Own the mountain with the award-winning 36 Performance, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability.
- Black anodized upper tubes
- FIT damper and EVOL air spring
- Low friction seals for improved performance
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment

$1,139.00
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability.
- Genuine Kashima Coating on upper tubes
- FIT damper and FLOAT EVOL air spring
- Low friction seals for improved performance
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment

$1,089.00
The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths.
- Step-Cast chassis
- Genuine Kashima Coating on upper tubes
- FIT4 damper and FLOAT EVOL air spring
- Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities
- Kabolt Thru Axle

$1,139.00
36 E-Optimized Factory forks are made specifically for the rigors of E-Bikes with a stouter chassis and longer durability due to adding material to strengthen critical areas. The design also uses tuning originally done for Enduro use, which fits the needs of the E-MTB and overall E-Bike uses.
- Genuine Kashima Coating on upper tubes
- FIT GRIP2 Damper and FLOAT air spring
- E-Bike Chassis
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment

$549.00
Whether you’re racing to make it to your meeting across town or striving for a personal best down your favorite new trail, the AWL e-SUV fork will get you there on time and in style. Featuring an all-new chassis, RAIL damper, and different travel options, the AWL is equipped to forgive rock and roots as well as curbs and potholes. Includes integrated mounts for fenders, lights and accessories.
- Award-winning RAIL damper delivers premium suspension performance with simple yet effective adjustability and maximum durability
- Stiff 34mm e-optimized chassis meets the most stringent e-bike testing standards
- Integrated fender and light mounts delivery maximum versatility
- Clearance for tires up to 2.6” wide
- 160-230 mm rotor compatible

$879.00 - $889.00
36 E-Optimized Performance forks are made specifically for the rigors of E-Bikes with a stouter chassis and longer durability due to adding material to strengthen critical areas. The design also uses tuning originally done for Enduro use, which fits the needs of the E-MTB and overall E-Bike uses.
- Black anodized upper tubes
- FIT GRIP damper and FLOAT air spring
- E-Bike Chassis
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment

$1,039.00
Competition drives innovation, and as cross-country athletes and course designers push the boundaries of lightweight components, 32 Step-Cast Factory rises to meet the demand. A redesigned crown for 2020 increases stiffness to the same level as the trail-proven 34. The distinct shape of the Step-Cast chassis uses a narrow stance to save weight and the step design makes room for the spokes and brake rotor.
- Genuine Kashima Coating on upper tubes
- 32 mm upper tubes and ample bushing overlap for a quality ride
- Hollowed out lower legs provide even more weight savings
- FIT4 damper and FLOAT air spring

$949.00
With a FLOAT EVOL air spring and on-the-fly compression adjustability, 32 Taper-Cast Factory delivers just enough tunable travel to take the edge off of wherever your gravel adventures may lead you.
- 700c chassis with clearance for large volume tires (50 mm max)
- Kashima Coated 7000 series aluminum stanchions and 12x100mm bolt-on thru axle
- FLOAT EVOL Air Spring and FIT 4 damper, featuring three on-the-fly settings - Open, Medium, and Firm
- Lightweight air spring optimized for short-travel
- Lightweight 32mm Step-Cast chassis with Lower Leg Air/Oil Bypass Channels
- Integrated full fender mounts (700c x 45 mm max with fender)

$1,019.00
The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths.
- Step-Cast chassis
- Genuine Kashima Coating on upper tubes
- FIT4 damper and FLOAT EVOL air spring
- Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities

$859.00
With a FLOAT EVOL air spring and on-the-fly compression adjustability, 32 Taper-Cast Performance Elite delivers just enough tunable travel to take the edge off of wherever your gravel adventures may lead you.
- 700c chassis with clearance for large volume tires (50 mm max)
- Black anodized 7000 series aluminum stanchions and 12x100mm bolt-on thru axle
- FLOAT EVOL Air Spring and FIT 4 damper, featuring three on-the-fly settings - Open, Medium, and Firm
- Lightweight air spring optimized for short-travel
- Lightweight 32mm Step-Cast chassis with Lower Leg Air/Oil Bypass Channels
- Integrated full fender mounts (700c x 45 mm max with fender)
- Performance Series black-on-black graphics package

$1,149.00
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability.
- Genuine Kashima Coating on upper tubes
- FIT damper and FLOAT EVOL air spring
- Low friction seals for improved performance
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment
- Updated Crown Design saves up to 20 grams, and offers significant structural improvements

$575.00
The ultimate aftermarket disc brake specific road cycling fork featuring 32mm of tire clearance and solid 12mm thru-axle for secure and confident handling. Building upon nearly a decade of experience making the world's best forks, ENVE's latest road disc fork features a modern 32mm of tire clearance, a low axle-to-crown height of 370mm, internal hose routing, and a lightweight one-piece form construction developed specifically to handle the demands of disc brakes, rough roads, and large volume tires.
- Material: Carbon Fiber
- Steerer Tube Length: 350mm
- Rake: 43, 50mm
- Axle to Crown: 370mm
- Brake: Disc
- Axle Compatibility: 12mm
- Max Rotor Size: 160mm
- Max Tire Clearance: 32mm
- Crown Race Diameter: 1.25
- Torque Spec: Steer Tube: 5Nm
- Torque Spec: Axle: 8Nm
- Weight: 425g

$650.00
There is beauty in simplicity and it's hard to argue with the simplicity of an unsuspended mountain bike. Despite its uncomplicated nature, ENVE's rigid Mountain Fork is loaded with unique features such as a removable fender, disc brake hose clip, and reversible axle inserts to fine tune the rake of the fork to match your ride preference and application.
- Material: Carbon Fiber
- Steerer Tube Length: 300mm
- Rake: 44, 52 Adjustable
- Axle to Crown: 470mm
- Brake: Disc
- Max Rotor Size: 180mm
- Max Tire Clearance: 3.4-inch
- Crown Race Diameter: 1.5-inch
- Torque Spec: Steer Tube: 5.5 Nm
- Torque Spec: Axle: 8Nm
- Weight: 711g (w/ fender), 686g (w/ clasps)

$414.00
Now you can update your 2010+ BoXXer Race, Team, RC, R2C2 and World Cup with the Charger Damper Upgrade Kit. The Charger is RockShox’s insanely refined damper, and its sealed construction with an expandable rubber bladder ensures damping consistency, reduces vibration, and is almost 100 grams lighter than the previous BoXXer damper. Adjustment is easy and intuitive, with a single compression adjuster and a beginning stroke rebound adjuster with a factory set Rapid Recovery tune. The internal shim stacks can be re-tuned for light or firm compression and rebound settings.
Includes damper, syringe, and suspension fluid.

$100.00
The beautiful Big Block track fork is now available in 1-inch and 1-1/8-inch sizes. Lugged crown, matching tips, straight blades, and looks that will make your heart melt. It’s the perfect replacement fork for nearly any track bike.
- Material: Full 4130 High Quality Chromoly tapered fork blades, lugged crown, and matching dropouts
- Axle to Crown Measurement: 375mm
- Offset: 32mm
- Steerer Tube Length: 300mm
- Spacing: 100mm
- Tire Clearance: 32c
- Brakes: Mid Reach

$65.99
- Cantilever brake mounts
- High-tensile steel construction
- Threadless fork
- Steerer diameter: 1 1/8-inch
- Steerer length: 260mm
- For bikes with 26-inch wheels

$130.00
Surly's Steamroller Fork pairs great handling with urban utility. It has steep track geometry for lightening fast response, making it as at home on the velodrome as it is flying downtown with cars and pedestrians. It features a flat crown, drilled to accept a standard-reach caliper brake, and the use of wide 38mm tires. And its stealthy Black powdercoat means your opponents in the Pursuit race will never see you coming!

$175.00
Designed around Surly's updated Krampus frame (but also employed on the updated Karate Monkey frames as well), this fork has 15mm thru-axle dropouts spaced at 110mm and clearance for up to a 29 x 3.0-inch tire. To accommodate such big tires it's got a longer axle-to-crown measurement than our Ogre or Karate Monkey forks, making it a perfect rigid fork option for lots of 29ers out there. The Krampus fork's blades were designed and manufactured specifically to play well with the unique forces such a long fork with big tires will encounter, and the steer tube is standard 1-1/8-inch threadless. It has line guides for a disc brake line as well as thru-blade eyelets and Three-Pack bosses on both fork legs.
- Axle-to-crown: 483mm
- Offset: 47mm
- Steerer: 260mm
- Tire Clearance: 29 x 3.0-inch
- Weight: 1180g uncut

$125.00
This beaut here was designed alongside our Midnight Special Frame. In an effort to shed a few grams (it's for a road bike after all), we opted to utilize a unicrown design rather than a lugged one. In addition to the weight savings, it also looks really nice—don't you think? Now, we don't throw the phrase "future-proof" around lightly, so we won't use it here either. What we will say is that, like the Midnight Special Frame, this fork is equipped with modern road standards like flat mount disc brakes and a 100mm x 12mm thru-axle. For increased versatility, it has braze-ons for fenders and racks (including mid-blade!).
- Axle-to-crown: 400mm
- Steerer: 350mm, 1-1/8" straight
- Tire Clearance: 27.5" x 2.32" or 700c x 42mm (27.5 x 1.95" or 700c x 38mm w/fenders)
- Weight: 1254g

$843.00
- 35mm chassis with a focused all-mountain mindset - satisfyingly stiff, efficient and designed to eliminate as much weight as possible.
- Charger RC damper featuring Low Speed Compression adjust
- DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep.
- RockShox premium short fender included
- Maxima Plush damping fluid reduces friction and silences damper noise