Filter By:
- Rigid (73)
- Suspension (67)
- Show More Brands
- Show Fewer Brands
Forks
$110.00
The beautiful Big Block track fork is available in both 1-inch and 1-1/8-inch sizes. Lugged crown, matching tips, straight blades, and looks that will make your heart melt. It’s the perfect replacement fork for nearly any track bike.
- Material: Full 4130 High Quality Chromoly tapered fork blades, lugged crown, and matching dropouts
- Axle to Crown Length: 375mm
- Offset: 32mm
- Steerer Tube Length: 300mm
- Spacing: 100mm
- Tire Clearance: 32c
- Brake Mount (Fork): mid reach caliper (47mm - 57mm)
$329.99
All Box One forks are engineered and crafted using our Oversized Technology. These forks are the single most crucial component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high loads. Those muscular shoulders aren’t just for looks, as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.
Key differences: This particular model fork is tailored for mid-sized racers and includes a lighter weight 1 inch 7000 series aluminum steerer tube and 10mm cold-forged dropouts.
Weight Limit: 45 kg (99 lbs) or less with limitations as per Category 1 of EN 16054:2012 Standard
FEATURES
- 7075-T6 Aluminum Standard 1” Steerer Tube to Accommodate Mid-Sized Racers
- Designed for 10mm Axle Conventional Hubs
- Internal Butterfly for Added Durability at Steerer Tube and Fork Crown Interface
IMPORTANT NOTES
- Includes Box One™ Stem Lock
- Note: Use of a star nut voids the warranty for this product.
COMPATIBILITY
- Box One Stem Spacers
- Box Two Stem Spacers
- Box Two Threadless Headset
- Box Two 1" Integrated Headset
- Box Two 1" Integrated Conversion Headset
- Box Two Headset Adapters
- Box Two Top Load 1" Stem
- Box Hex Lab 1" Stem
- Box Two Center Clamp 1" Stem
$329.99
All Box One forks are engineered and crafted using our Oversized Technology. These forks are the single most important component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high load. Those muscular shoulders aren’t just for looks as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.
Key differences: This particular model fork is tailored for larger-sized racers and therefore includes a lightweight 1-1/8 inch 7000 series aluminum steerer tube and 10mm cold-forged dropouts.
Weight Limit: 115kg (253 lbs) with limitations as per Category 2 of EN 16054:2012 Standard
FEATURES
- 1-1/8 Inch 7000 Series Aluminum Steerer Tube
- Standard Size Fork for Larger-Sized Racers
- Internal Butterfly Steerer Tube and Fork Crown Interface
- 10mm Standard Dropouts
- Cold-Forged and Bonded Dropouts
COMPATIBILITY
- Box Two 1.1/8" Integrated Headset
- Box One Carbon 45x45 1.1/8" Integrated Headset
- Box Two Threadless Headset
- Box Two Headset Spacers
- Box One Front Load Stem
- Box One Top Load Stem
- Box Two Front Load Stem
- Box Two Top Load Stem
- Box One Delta Stem
- Box One Center Clamp Stem
- Box Two Center Clamp Stem
SPECIFICATIONS
- 20 Inch 24 Inch
- Material High Modulus Unidirectional Carbon Fiber Construction
- Steerer Material 7000 Series Aluminum
- Finish High Gloss Black
- Offset 32mm
- Steerer Tube 1-1/8 Inch
- Weight
- 20": 560g / 19.75oz
- 24": 585g / 20.7oz
$329.99
All Box One forks are engineered and crafted using our Oversized Technology. These forks are the single most crucial component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high load. Those muscular shoulders aren’t just for looks, as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.
Key differences: This particular model fork is tailored for smaller racers and includes a lighter weight 1 inch 7000 series aluminum steerer tube and 10mm cold-forged dropouts.
FEATURES
- Overall Reduced Size for Smaller Racers
- 1 Inch 7000 Series Aluminum Steerer Tube
- Internal Butterfly Steerer Tube and Fork Crown Interface
- 10mm Standard Dropouts
- Cold-Forged and Bolded Dropouts
COMPATIBILITY
- Box One Stem Spacers
- Box Two Stem Spacers
- Box Two Threadless Headset
- Box Two 1" Integrated Headset
- Box Two 1" Integrated Conversion Headset
- Box Two Headset Adapters
- Box Two Top Load 1" Stem
- Box Hex Lab 1" Stem
- Box Two Center Clamp 1" Stem
SPECIFICATIONS
- 20 Inch
- Material High Modulus Unidirectional Carbon Fiber Construction
- Steerer Material 7000 Series Aluminum
- Finish High Gloss Black
- Offset 32mm
- Steerer Tube 1 Inch
- Weight 397g/14.0oz
$349.99
All Box One forks are engineered and crafted using our Oversized Technology. These forks are the most important component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high loads. Those muscular shoulders aren’t just for looks as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.
Key differences: This particular model fork is tailored for larger-sized racers. It also takes our application of Oversized Technology one step further as it includes a tougher 1-1/8 inch chromoly steerer tube and stiffer 20mm through-axle cold-forged dropouts.
Weight Limit: 115kg (253 lbs) with limitations per Category 2 of EN 16054:2012 Standard.
FEATURES
- Oversized Technology™
- Chromoly Steel Steerer Tube to Accommodate Larger-Sized Racers
- 20mm Through Axle to Increase Responsiveness
- Internal Butterfly for Added Durability at Steerer Tube and Fork Crown Interface
$379.99
All Box One forks are engineered and crafted using our Oversized Technology. These forks are the single most important component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high loads. Those muscular shoulders aren’t just for looks as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.
Key differences: This particular model fork pushes our Oversized Technology to the extreme as it includes the 1.5 to 1-1/8 inch tapered 7000 series aluminum steerer tube and stiffer 20mm through-axle cold-forged dropouts. Say goodbye to deflection.
Weight Limit: 115kg (253 lbs) with limitations as per Category 2 of EN 16054:2012 Standard
FEATURES
- Oversized Technology™
- Tapered Steerer Tube to Reduce Deflection
- 20mm Through Axle to Increase Responsiveness
- Internal Butterfly for Added Durability at Steerer Tube and Fork Crown Interface
$57.74
- Chromoly steel BMX style forks
- Perfect replacement for modern BMX-inspired wheelie bikes
- Steerer Type: Threadless
- Steerer Size: 1-1/8-inch
- Material: Chromoly
- Race Diameter: 30mm
- Axle: 3/8-inch
$144.99
Made from revised 100% Cult Classic tubing for increased strength and then 100% post-weld heat treated. Investment cast 1pc drop outs for maximum strength and a super sleek finish. 1-pc machined steerer tube with an integrated bearing race, tapered legs, and tire clearance for big tires. Lifetime warranty.
$144.99
Made from revised 100% Cult Classic tubing for increased strength and then 100% post-weld heat treated. Investment cast 1pc drop outs for maximum strength and a super sleek finish. Features an updated top cap retention design.
- 1-pc machined steerer tube with an integrated bearing race
- Tapered legs
- Tire clearance for 2.40” tires
- Updated top cap retention design
$169.99
Made from revised 100% Cult Classic tubing for increased strength and then 100% post-weld heat treated. 1-pc machined steerer tube with an integrated bearing race, tapered legs, and plenty of tire clearance.
$1,099.99
The Cane Creek Helm MKII Air Suspension Fork features an upgraded damper design for increased support and control and a redesigned air spring that allows for increased air volume for better traction and suppleness.
- D-Loc 15mm bolt-on thru-axle
$89.99
- Forged dropouts with eyelets, straight-gauge oval tapered blades
- Dimension Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing
- 85mm threaded section
- Fits up to 30c tires
- Axle to Crown Length: 382 mm
- Brake Mount (Fork): Long Reach Caliper (55mm - 73mm)
- Crown Race: 27
- Front Axle: 9mm x 100mm
- Material: Steel
- Offset: 50mm
- S.H.I.S. Stem Clamp Diameter: 25.4-24tpi Quill
- Steerer Type: Straight
- Weight: 839g, 876g, 907g
- Wheel Size: 27"
$387.00
ENVE's Road Fork is the fork by which all others are judged, built for road cyclists looking for the optimal balance of weight, strength, and stiffness.
When everyone was turning away from the fork aftermarket, we focused our efforts on creating the best aftermarket fork we could. By following our mantra of functional simplicity, we developed a manufacturing process that allows the fibers in an ENVE fork to run continuously from the top of the steerer to the bottom of the drop-outs. The ENVE forks feature a hollow one-piece design free of bonding or drilling, and the brake bolt hole is molded into the crown, allowing for additional weight savings and strength. You can literally put an ENVE fork on a bike within minutes of it leaving the mold. While this manner of construction is novel, the real win is that the majority of artisan frame builders and customers choose ENVE as their fork of choice due to its confident on-road performance and handling characteristics.
$550.00
A purpose built carbon fiber fork for gravel and cyclocross applications featuring internal hose routing, flat mount brake compatibility, and clearance for up to 50mm tires. This fork is perfect for gravel riders looking for more clearance, weight savings, compliance, and the versatility of fender mounts to enhance their gravel grinding experience.
- Material: Carbon
- Weight: 520g
- Steer Tube Length: 350mm
- Rake: 50mm
- Axle To Crown: 395mm
- Max Rotor Size: 140mm – 160mm
- Max Tire Clearance: 700c x 50c, 27.5 x 2.25-inch
- Crown Race Diameter: 1.5-inch
- Torque Spec - Steer Tube: 5.5Nm
- Torque Spec - Axle: 8Nm
$575.00
The ultimate aftermarket disc brake specific road cycling fork featuring 32mm of tire clearance and solid 12mm thru-axle for secure and confident handling. Building upon nearly a decade of experience making the world's best forks, ENVE's latest road disc fork features a modern 32mm of tire clearance, a low axle-to-crown height of 370mm, internal hose routing, and a lightweight one-piece form construction developed specifically to handle the demands of disc brakes, rough roads, and large volume tires.
- Material: Carbon Fiber
- Steerer Tube Length: 350mm
- Rake: 43, 50mm
- Axle to Crown: 370mm
- Brake: Disc
- Axle Compatibility: 12mm
- Max Rotor Size: 160mm
- Max Tire Clearance: 32mm
- Crown Race Diameter: 1.25
- Torque Spec: Steer Tube: 5Nm
- Torque Spec: Axle: 8Nm
- Weight: 425g
$625.00
A truly all season, all terrain fork for fat-bikes with maximum tire clearance. This fork utilizes a reversible drop-out chip that adjusts the rake, allowing for multiple wheel sizes. With over 10 years of carbon experience, ENVE is the trusted source for many when it comes to forks. After creating the most innovative rigid mountain fork in the market, we set our sights on fat bike forks. Like all ENVE Forks, the Fat Fork is molded in one-piece from the steerer to the drop-outs and utilizes a reversible chip to adjust for optimized handling with 26 or 27.5-inch wheels. Adding trusted reliability and lightweight design to 5-inches of tire clearance, this is the upgrade to have for your all-season rig.
- Material: Carbon
- Weight: 748g
- Steer Tube length: 350mm
- Rake: 42mm, 51mm (adjustable)
- Axle To Crown: 488.8mm
- Max Rotor Size: 160mm - 203mm
- Max Tire Clearance: 5.2-inch
- Crown Race Diameter: 1.5-inch
- Torque Spec – Steer Tube: 5.5Nm
- Torque Spec - Axle: 8Nm
$650.00
Riding rigid isn’t for everyone, but for those who value functional simplicity, the updated ENVE Mountain Fork delivers.
BOOST (15X110MM)
- Material: Carbon
- Accessory Mounts: Yes
- Weight: 719g with Fender, 676g (w/ clasps)
- Travel Correction: 120mm (Compatible with frames designed around 100mm-140mm Travel Forks)
- Steerer Tube Length: 300mm
- Rake: Adjustable – 44mm, 52mm
- Axle To Crown: 490mm – 44mm Rake Position; 492mm – 52mm Rake Position
- Brake: Disc
- Brake Mount: Post Mount
- Axle Compatibility: 15 x 110mm
- Max Rotor Size: 180mm
- Max Tire Clearance: 29 x 3.0” with Fender
- Crown Race Diameter: 1.5”
- Torque Spec: Steerer Tube: 5.5 Nm
- Torque Spec: Axle: 8 Nm
$27.00
Service your suspension fork with Enduro Seal KIts.
- Custom made for each make and model of fork
$769.00
Competition drives innovation, and as cross-country athletes and course designers push the boundaries of lightweight components, 32 Step-Cast Performance rises to meet the demand. A redesigned crown for 2020 increases stiffness to the same level as the trail-proven 34. The distinct shape of the Step-Cast chassis uses a narrow stance to save weight and the step design makes room for the spokes and brake rotor.
- Black anodized upper tubes
- 32 mm upper tubes and ample bushing overlap for a quality ride
- Hollowed out lower legs provide even more weight savings
- FIT GRIP damper and FLOAT air spring
- Performance Series black-on-black graphics package
$989.00
The 38 Performance Series forks retain the same black anodized 7000 series aluminum upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately.
- Black anodized upper tubes
- FIT GRIP damper and FLOAT EVOL air spring
- Three on-the-fly compression damping positions: Open, Medium, Firm
- Performance Series black-on-black graphics package
$1,069.00
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability.
- Genuine Kashima Coating on upper tubes
- FIT damper and FLOAT EVOL air spring
- Low friction seals for improved performance
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment
$1,079.00
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability.
- Genuine Kashima Coating on upper tubes
- FIT damper and FLOAT EVOL air spring
- Low friction seals for improved performance
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment
- Updated Crown Design saves up to 20 grams, and offers significant structural improvements
$1,139.00
36 E-Optimized Factory forks are made specifically for the rigors of E-Bikes with a stouter chassis and longer durability due to adding material to strengthen critical areas. The design also uses tuning originally done for Enduro use, which fits the needs of the E-MTB and overall E-Bike uses.
- Genuine Kashima Coating on upper tubes
- FIT GRIP2 Damper and FLOAT air spring
- E-Bike Chassis
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment
$1,139.00
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability.
- Genuine Kashima Coating on upper tubes
- FIT damper and FLOAT EVOL air spring
- Low friction seals for improved performance
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment
$1,149.00
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability.
- Genuine Kashima Coating on upper tubes
- FIT damper and FLOAT EVOL air spring
- Low friction seals for improved performance
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment
- Updated Crown Design saves up to 20 grams, and offers significant structural improvements
$1,149.00
Packed with features to dominate the descents, the 36 answers the call from aggressive all-mountain riders. Now available with the gravity-focused GRIP X2 damper.
GRIP X2
Ultimate descending performance with greater traction and even more control at speed. The most tunable, supportive and smoothest descent-focused damper created by FOX.
KABOLT X AXLE
A lightweight bolt-on floating axle that shaves grams while increasing torsional stiffness and reducing friction between upper and lower fork legs for smoother suspension travel.
LOWER LEG BLEEDERS AND BYPASS CHANNELS
Push-button pressure equalization (bleeders) and increased volume to alleviate pressure ramping (bypass channels) allow improved small bump sensitivity and responsiveness.
CHASSIS Standard
DAMPER CONTROLS HSC - LSC - HSR - LSR
AXLE Kabolt-X 110
RAKE 44mm
STEERER 1.5 Tapered
UPPER TUBE FINISH Kashima
AIR CHANNELS Yes
BLEEDERS Yes
FLOATING AXLE Yes
ROTOR SIZE. 180 direct Post Mount, Up to 230 compatible
MUD GUARD MOUNT Optional FOX 36/38 Mud Guard with sturdy 4-point direct-mount attachment
AIR SPRING FLOAT EVOL
STARTING WEIGHT 1929g (36, 29, F-S, 160, Grip X, Kabolt X)
$1,249.00
E-Bike specific long-travel Enduro fork with 38mm stanchion tubes featuring, floating axle, new arch design, and lower leg bleeders to release built-up pressure.
- Genuine Kashima Coating on upper tubes
- GRIP2 damper with Variable Valve Control
- Next generation FLOAT EVOL with larger negative air chamber increases small bump sensitivity
- Floating axle design
- Lower leg bleeders
- Direct mud guard mount
$1,249.00
When you need to go really big, reach for the 38. Optimized for 160-180mm of travel, the 38 redefines capability of a long travel single crown fork, setting a new benchmark for confidence, performance, and durability.?Welcome to the big time.
GRIP X2
Ultimate descending performance with greater traction and even more control at speed. The most tunable, supportive and smoothest descent-focused damper created by FOX.
KABOLT X AXLE
A lightweight bolt-on floating axle that shaves grams while increasing torsional stiffness and reducing friction between upper and lower fork legs for smoother suspension travel.
LOWER LEG BLEEDERS AND BYPASS CHANNELS
Push-button pressure equalization (bleeders) and increased volume to alleviate pressure ramping (bypass channels) allow improved small bump sensitivity and responsiveness.
DAMPER GRIP X2
DAMPER CONTROLS HSC - LSC - HSR - LSR
AXLE Kabolt-X 110
RAKE 44mm
STEERER 1.5 Tapered
UPPER TUBE FINISH Kashima
AIR CHANNELS Yes
BLEEDERS Yes
FLOATING AXLE Yes
ROTOR SIZE 180 direct Post Mount, Up to 230 compatible
MUD GUARD MOUNT Optional FOX 36/38 Mud Guard with sturdy 4-point direct-mount attachment
AIR SPRING FLOAT EVOL
STARTING WEIGHT 2194g (38, 29, F-S, 180, Grip X, Kabolt X)
$359.95
Lightweight, stiff, compliant, and available in three sizes to give you more choices for converting your bike over to rigid. With 34mm carbon legs and forged aluminum crowns and dropouts, the Rock Solid family of forks will make your machine a precise, feather-weight, singletrack screamer. 490mm, 465mm, and 445mm models are available.
- Designed for 26", 27.5", or 29" wheel MTB applications, disc only (74mm post-mount)
- 34mm carbon legs with forged aluminum crown and dropouts
- Max Rotor Size 185mm or may void the warranty
- 3 different sizes for optimal ride height.
$359.95
Lightweight, stiff, compliant, and available in three sizes to give you more choices for converting your bike over to rigid. With 34mm carbon legs and forged aluminum crowns and dropouts, the Rock Solid family of forks will make your machine a precise, feather-weight, singletrack screamer. 490mm, 465mm, and 445mm models are available.
- Designed for 26", 27.5", or 29" wheel MTB applications, disc only (74mm post-mount)
- 34mm carbon legs with forged aluminum crown and dropouts
- Max Rotor Size 185mm or may void the warranty
- 3 different sizes for optimal ride height.
$314.99
The Circus project started as a way to get our slopestyle riders into competition, but it wound up becoming an industry-leading dirt jump fork for riders all over the world. Circus has set the benchmark for everyday riders' jump session requirements and delivered podium results at pro-level competitions for almost a decade.
- Coil Spring
- ABS+ Compression Damping w/ Jump Stack
- Adjustable TPC Rebound Damping
- Absolute+ cartridge platform oil damping system: specifically tuned for Dirt Jumping
- 20mm hex axle provides superior torsional stiffness
- Forged I-beam style crown: bigger, stronger and more durable
- 1-1/8" threadless steel steerer and 32mm steel stanchions
- Can be reduced to 80mm travel with included spacers
$474.99
The Circus project started as a way to get our slopestyle riders into competition, but it wound up becoming an industry-leading dirt jump fork for riders all over the world. Circus has set the benchmark for everyday riders' jump session requirements and delivered podium results at pro-level competitions for almost a decade.
- 80/100mm or 120/130mm Internally Adjustable Travel
- Air Spring
- ABS+ Compression Damping w/ Jump Stack
- Adjustable TPC Rebound Damping
- Wheel Size: 26"
- 130mm travel models can be reduced to 120mm and 100mm models can be reduced to 80mm travel using included spacers
- 20mm hex axle provides superior torsional stiffness
- Absolute+ cartridge platform oil damping system: specifically tuned for Dirt Jumping
- Forged I-beam style crown: bigger, stronger, and more durable
- Alloy steerer, and 32mm aluminum stanchions
$499.99
The Circus project started as a way to get our slopestyle riders into competition, but it wound up becoming an industry-leading dirt jump fork for riders all over the world. Circus has set the benchmark for everyday riders' jump session requirements and delivered podium results at pro-level competitions for almost a decade.
- Air Spring
- ABS+ Compression Damping w/ Jump Stack
- Adjustable TPC Rebound Damping
- 130mm travel models can be reduced to 120mm and 100mm models can be reduced to 80mm travel using included spacers
- 20mm hex axle provides superior torsional stiffness
- Absolute+ cartridge platform oil damping system: specifically tuned for Dirt Jumping
- Forged I-beam style crown: bigger, stronger, and more durable
- Alloy steerer, and 32mm aluminum stanchions
$599.99
The Mattoc is an amazing fork due to its versatility yet made even more amazing as its capability to do it all comes without compromise. The “versatile specificity” of this fork means that it adapts perfectly to many disciplines and styles of riding while performing flawlessly in each and every one. The Mattoc Comp’s 34mm Manitou-engineered chassis keeps weight to a minimum while maintaining best-in-class stiffness. Its Expert Air spring with IVA technology, ABS+ compression damping, and in leg adjustable TPC rebound damping make for the smoothest ride you’ve experienced yet. With air, air volume, rebound, and compression adjustments that smooth ride can be tailored to your specific needs. The next step to a better ride starts with Mattoc, #thepeoplesfork.
Key Features:
- 27.5” is 20g less than the previous model.
- Expert air allows for internal travel adjustments with no added parts.
- Expert Air spring systems contain a unique balancing valve that equalizes the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel. Expert Air has identical performance to Dorado Air in a more cost-effective package.
- Incremental Volume Adjust (IVA) modifies the volume in the positive air chamber with self-contained spacers dictating the position of the IVA piston. This allows the main air spring ramp-up to be tuned to the rider weight, style and conditions without the need for additional parts.
- Absolute Plus (ABS+) is a shim stack-based damper that features external incremental Low-Speed compression adjustment.
- 27.5” 110-150mm, 29” 110-150mm.
- TSR (Trail Side Relief) casting bleed screws allow users to release casting pressure from the fork. Casting pressure increases during normal riding. Extreme riding can increase the pressure at a quicker rate. Temperature and elevation changes can also cause increased casting pressure. Releasing casting pressure can improve overall fork feel and small bump compliance.
- Expert air spring and lower weight brings top-level performance to a new price point.
$749.99
Rebirth of an Icon.
The R7 has a vast history of combining a lightweight chassis with performance and reliability. And this latest incarnation of the icon is no different. The new R7 expert pairs superior damping thanks to our 3-position dual piston VTT damper with a lightweight and stiff 32mm chassis.
- VTT damper with compression open mode and rebound adjustability
- 32mm black anodized 6000 series aluminum stanchions with Reverse-Arch design
- Internally adjustable from 120 to 80mm in 10mm increments
- Available in two different offsets 44 or 51mm
$799.99
Featuring 37mm stanchions, home mechanic-approved travel adjustability from 180mm to 140mm, and our easy-to-use VTT-6P damper, the Mezzer Expert is the smart choice for anyone looking to dive into the Enduro Fork market. Should you later decide you would like more adjustability from your fork, factory upgrades such as IRT and MC2 are available and can be easily installed in your own garage. At 2030g this fork is the second lightest option available within the Enduro fork market, second only to the Mezzer Pro of course.
- Expert Air offers ultimate sensitivity featuring a self-equalizing negative air spring.
- IVA (Incremental Volume Adjuster) allows you to modify your positive air chamber volume by rearranging self-contained spacers. You'll never lose a volume spacer again.
- Integrated fender can be installed/removed by three small screws threaded into the arch of the fork.
- VTT-6P damper provides 6 clicks to tune damping for all types of terrain
- 37mm stanchions, Reverse-Arch design, and Hexlock SL2 axle for the ultimate stiffness
- TSR, Trail Side Relief valves on the back of the lower legs allow air to be bled off if it builds up within the lower legs to keep things butter smooth between service intervals
- Internally adjustable travel from 180mm to 140mm in 10mm increments with included spacers
- 2.6" maximum tire width
$824.99
Lighter, stiffer, and more tunable than its competitors, the Mattoc is the desired componentry for all bikes. The Mattoc Expert should be on your bike not just because it can address all needs, but because it can improve the riding experience in a meaningful way. The Expert version of #thepeoplesfork tips the scales at a scant 1770 grams yet is stiffer than nearly anything else available in its travel range. Translation: an extremely lightweight and efficient build whose industry-leading stiffness ensures precise and reactive handling ready to outperform any other product it is compared to. The Manitou Expert boasts an Expert Air spring with IVA, compression damping via the VTT-6P system, and rebound damping via an open cartridge with adjustable TPC. True to Manitou’s industry-leading tuning capabilities, the Expert allows adjustments via Air, Air Volume, Rebound, and 3-position Compression (Open, Trail, Lock) With Open Mode Low-Speed Compression Adjustment. Perhaps the most versatile fork available not only in terms of travel but also application and customization of performance. Such amazing performance, tailor-tuned to your needs, arises from Manitou’s never-ending search for a smoother and better, best ride.
KEY FEATURES
- 27.5” is 20g less than the previous model.
- Over 19% stiffness increase from the current 27.5" 160mm to the new 27.5" 150mm. 29" Stiffness increases are higher.
- Expert air allows for internal travel adjustments with no added parts. New travel spacers account for negative air volume change, so the 110mm fork has the same initial stroke feel as the 150mm
- Expert Air spring systems contain a unique balancing valve that equalizes the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel. Expert Air has identical performance to DoradoTM Air in a more cost-effective package.
- Incremental Volume Adjust (IVA) modifies the volume in the positive air chamber with self contained spacers dictating the position of the IVA piston. This allows the main air spring ramp-up to be tuned to the rider's weight, style, and conditions without the need for additional parts.
- A single external compression adjuster that simultaneously adjusts HS and LS damping characteristics. It features a fixed shim stack and a secondary shim stack that is preloaded by the external adjuster. The resulting wide tuning range combines the benefits of a low-speed platform and high-speed progressive tune can suit any terrain.
- Trail Side Relief casting bleed screws allow users to release casting pressure from the fork. Casting pressure increase is normal, and extreme riding can increase the pressure at a fast rate. Temperature and elevation changes can also cause increased casting pressure. Releasing casting pressure can improve overall fork feel and small bump compliance.
$1,049.99
The new Mattoc is the fruit of one of the most profound development cycles in Manitou history. It is the physical embodiment of “great things take time”. It is not an offering that follows the crowd, designed around the latest trend or buzz of the market. Rather, a component that aims to add real value and benefit to the rider. Capable of not only pulling duty in a range of disciplines ranging from XC to light enduro but doing so with zero compromise makes the Mattoc “best-in-class” ! The lightest, stiffest, and most tunable fork over more segments than any of its competitors, the Mattoc PRO is an amazingly versatile product capable of vastly improving your time in the saddle. At 1750 grams it is a featherweight solution given its wide travel range, yet its industry-leading stiffness lends it to a performance without rival. Consider also its amazing reliability and you have a fork that does it all and does it amazingly. A true, no-compromise, authentic fork, serving the real needs of the widest range of the mtb public and offering serious performance advantages to each individual one of them, no matter how they choose to ride.
The Dorado Air spring with IRT allows for an extremely lightweight build yet a suspension performance derived from our top-of-the-line DH fork. Compression damping via MC2 Sealed Cartridge with HBO technology and a sealed damper TPC for rebound, and you’ve got yourself an extremely sophisticated piece of suspension technology. Adjustable Air, IRT, Rebound, High and Low-Speed compression make for perhaps the most tunable, personalized custom performance suspension solution available on the market. Include all of this technology into an extremely stiff, reliable, 1750 gram package and you have a ride-changing component that is the envy of the industry
Key Features:
- 59 grams decrease from the previous model.
- Over 19% stiffness increase from the current 27.5” 160mm to the new 27.5” 150mm. 29” Stiffness increases are higher.
- DoradoTM air allows for internal travel adjustments with no added parts. New travel spacers account for negative air volume change, so the 110mm fork has the same initial stroke feel as the 150mm.
- Dorado Air spring systems contain a unique balancing valve that equalizes the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel. Dorado Air is our lightest-weight air spring technology.
- Infinite Rate TuneTM (IRT) allows for advanced spring tuning by independently adjusting air pressures in the beginning and end stroke. IRT technology creates a secondary positive air spring that affects only the middle-to-end stroke of the fork. This allows the main air spring to be set to lower pressures for improved small bump sensitivity while maintaining mid-stroke support and moderate to aggressive end-stroke ramp-up.
- Sealed Dampers offer more consistent damping and lighter breakaway force, especially over long descents. Our Damper uses a bladder system to compensate for head build-up along with a relief valve. Using both systems gives us consistency along with a long service life. Having non-adjustable HBO eases setup for the user.
- TSR (Trail Side Relief) casting bleed screws allow users to release casting pressure from the fork. Releasing casting pressure can improve overall fork feel and small bump compliance.
$1,049.99
Featuring 37mm stanchions and our Reverse Arch design the Mezzer Pro is the stiffest Enduro fork on the market… it’s also the lightest. How did we manage to accomplish this you ask? Well, it’s not hollow if that’s what you're wondering. In fact, this fork is loaded with technologies such as a fully sealed MC² damper, our proven Dorado air spring, and the life-changing IRT volume adjuster. What does all this mean? It means you no longer need to pick two, you can have the lightest, stiffest, and incredibly adjustable fork all at once.
Key Features:
- 37mm stanchions, Reverse Arch design, and Hexlock SL2 axle combined together result in ultimate stiffness
- Originally developed for the Dorado down-hill fork, the Dorado Air Spring offers ultimate sensitivity featuring a self-equalizing negative air spring. When inflating the fork both the positive and negative air chambers are filled simultaneously equalizing the pressures to create an incredibly supple feel
- IRT (Infinite Rate Tune) volume adjuster allows control over the mid-stroke support and bottom-out progressivity independent from the initial spring rate to independently tune small bump sensitivity and big-hit performance
- Sealed MC² damper provides a range of blow-off thresholds to satisfy any requirement with separate high-speed and low-speed adjustments. Utilizing a bladder, our new sealed cartridge maintains damping consistency in the most severe riding conditions.
•140mm to 180mm internally adjustable travel in 10mm increments (travel spacers included)
•27.5” and 29” wheels
•Integrated flexible fender can be installed/removed by three small screws threaded into the arch of the fork
Product Details:
- 37mm stanchions Reverse-Arch design and Hexlock SL2 axle for the ultimate stiffness
- Fully adjustable IRT air spring to fine-tune ride feel
- Sealed MC2 damper provides a range of blow-off thresholds to satisfy any requirement with separate high-speed and low-speed adjustments
- 140mm to 180mm internally adjustable travel in 10mm increments (travel spacers included)
- Integrated flexible fender can be installed/removed by three small screws threaded into the arch of the fork
$1,099.99
Featuring 37mm stanchions and our Reverse Arch design the Mezzer Pro is the stiffest Enduro fork on the market… it’s also the lightest. How did we manage to accomplish this you ask? Well, it’s not hollow if that’s what you're wondering. In fact, this fork is loaded with technologies such as a fully sealed MC² damper, our proven Dorado air spring, and the life-changing IRT volume adjuster. What does all this mean? It means you no longer need to pick two, you can have the lightest, stiffest, and incredibly adjustable fork all at once.
Key Features:
- 37mm stanchions, Reverse Arch design, and Hexlock SL2 axle combined together result in ultimate stiffness
- Originally developed for the Dorado down-hill fork, the Dorado Air Spring offers ultimate sensitivity featuring a self-equalizing negative air spring. When inflating the fork both the positive and negative air chambers are filled simultaneously equalizing the pressures to create an incredibly supple feel
- IRT (Infinite Rate Tune) volume adjuster allows control over the mid-stroke support and bottom-out progressivity independent from the initial spring rate to independently tune small bump sensitivity and big-hit performance
- Sealed MC² damper provides a range of blow-off thresholds to satisfy any requirement with separate high-speed and low-speed adjustments. Utilizing a bladder, our new sealed cartridge maintains damping consistency in the most severe riding conditions.
- 140mm to 180mm internally adjustable travel in 10mm increments (travel spacers included)
- 27.5” and 29” wheels
- Integrated flexible fender can be installed/removed by three small screws threaded into the arch of the fork
Product Details:
- MC² bladder cartridge damper offers adjustable high-speed compression damping, low-speed compression damping
- Expansion bladder with patent-pending blow-off valve compensates for oil displacement, with lower friction than a traditional internal floating piston
- 37mm chassis with torsional stiffness up to 30% higher than similar forks from competitors
- Dorado Air spring features an enlarged negative air chamber for linear initial stroke and reduced IRT volume for progressive end stroke
- Internally adjustable travel from 180mm to 140mm
$1,299.99
Coil Fans Rejoice!
Once again, the Dorado is available with a coil option. The new Dorado Comp features the same 37mm chassis as the Expert but with a more set-it-and-forget-it vibe. The coil spring provides a smooth consistent feel 100% of the time with 0% of any hassle. On the damping side of things, our ABS+ Damper offers a great adjustment range, terrific reliability, and easy serviceability. The Dorado Comp is built for riders who just want to ride and not sweat any of the small stuff.
Key Features:
- New 37mm chassis results in a massive increase in stiffness and ride quality. The new chassis is 20% stiffer compared to our former 36mm version.
- Inverted Design provides an incredibly smooth and consistent feel due to constant lubrication of the bushings and seals. The inverted design also provides a major increase in fore-aft stiffness compared to traditional forks while maintaining torsional compliance which provides more control to the rider over rough terrain.
- Coil Spring provides maximum bump sensitivity and simple service procedures. The standard spring rate provided in the fork is a medium rate of 35lb/in. For tuning, there are six spring rates available for this fork; 25lb/in, 30lb/in, 35lb/in, 40lb/in, 45lb/in, and 50lb/in.
- ABS+ damper is known for its incredible reliability and easy tunability. Adjustments include a low-speed compression adjustment and a low-speed rebound adjustment.
- Fits both 29" and 27.5" wheels. Markings on the outer legs indicate the proper clamping point for the ideal axle to crown measurements depending on wheel size. The fork legs can be used with both wheel sizes.
- Two Crown Options are available with this fork. The 47 offset is designed to work with 27.5" wheels and intended axle to crown. The 57 offset crown is designed for 29" wheels and axle to crown. For those looking to run the lower offset crown with 29" wheels please reference our fit document to see if your headtube length is compatible.
- TSR Bleed Screws allow you to release excess pressures built up in the outer legs of your fork while riding keeping your fork smooth and supple all day long.
Product Details:
- 37mm 6000 Series Aluminum stanchions with carbon fiber legs
- Externally Adjustable: high-speed compression, low-speed compression, and rebound
- Dorado air spring with IRT (Infinite Rate Tune) volume adjuster allows the rider to adjust mid-stroke support and bottom-out progressivity independent of initial spring rate
- TPC+ Damper with HBO (Hydraulic Bottom Out)
- TSR Bleeders
- Includes removable bolt-on fender
$1,549.99
Get Inverted.
Back and better than ever the new Dorado Expert is ready to take on the gnarliest conditions mountain biking can provide. Whether you’re looking to cut seconds off the splits, lap the local park, or get sendy in the back hills of Utah the Dorado Expert has you covered. Featuring an all-new 37mm chassis, completely redesigned internals, and on-trail precision that only inverted forks can provide the new Dorado is your ticket to the best ride you’ve ever had.
Key Features:
- New 37mm chassis results in a massive increase in stiffness and ride quality. The new chassis is 20% stiffer compared to our former 36mm version
- Inverted Design provides an incredibly smooth and consistent feel due to constant lubrication of the bushings and seals. The inverted design also provides a major increase in fore-aft stiffness compared to traditional forks while maintaining torsional compliance which provides more control to the rider over rough terrain.
- The Dorado Air Spring system contains a unique balancing valve that equalizes the positive and negative air chambers during the air-fill process resulting in a consistent feel without any flat or dead spots. It also allows easy Travel Adjustability from 180 to 190 and 203mm without the need for any spare parts.
- IVA (Incremental Volume Adjust) modifies the volume in the positive air chamber with self-contained spacers dictating the position of the IVA piston and your volume amount.
- The new TPC+ Damper has increased oil volume and improved flow paths for improved bump compliance and increased consistency. TPC+ features two compression pistons, a hydraulic bottom out, and a spring-backed IFP for a smooth and predictable feel for every impact. Adjustments include; High-speed compression, Low-speed compression, and Low-speed rebound.
- Fits both 29" and 27.5" wheels. Markings on the outer legs indicate the proper clamping point for ideal axle-to-crown measurements depending on wheel size. The fork legs can be used with both wheel sizes.
- Two Crown Options are available with this fork. The 47 offset is designed to work with 27.5" wheels and intended axle to crown. The 57 offset crown is designed for 29" wheels and axle to crown. For those looking to run the lower offset crown with 29" wheels please reference our fit document to see if your headtube length is compatible.
- TSR Bleed Screws allow you to release excess pressures built up in the outer legs of your fork while riding keeping your fork smooth and supple all day long.
Product Details:
- 37mm 6000 Series Aluminum stanchions with carbon fiber legs
- Externally Adjustable: high-speed compression, low-speed compression, and rebound
- Dorado air spring with IRT (Infinite Rate Tune) volume adjuster allows the rider to adjust mid-stroke support and bottom-out progressivity independent of initial spring rate
- TPC+ Damper with HBO (Hydraulic Bottom Out)
- TSR Bleeders
- Includes removable bolt-on fender
$699.00
The Z1 is freedom from the status quo. Step outside enduro's obsession with counting seconds and go have some fun in the woods. The Z1 is an aggressive all-mountain and enduro fork with a different viewpoint for riders' priorities. Everyone wants suspension performance that's smooth as butter with great traction and control, and that's where the Z1 shines. After that, the Z1 departs from industry norms. More time fiddling with adjustments means less time shredding the trails. The Z1 keeps it simple with intuitive compression sweep adjustment, from locked out to full open. Simple rebound adjustment covers the range from fast to slow rebound for a full range of rider weights and preferences without overcomplicating things. Plus, it's biased towards stiffness, ride performance, and durability, so while it's carrying a few extra grams, you probably won't notice because you're having too much fun.
- 36mm stanchions
- Enhanced lower leg stiffness with "M" arch design for maximum tire clearance
- 15 QR x 110mm Boost axle
- FIT GRIP damper with adjustable compression and rebound
- FLOAT EVOL air spring
$779.00
Riders have been asking for it, and Marzocchi heard the call and has proudly delivered. The new Z1 Coil builds on the legacy of the single-crown fork that started the revolution way back in the '90s – the O.G. Bomber Z1 Coil. Starting with the stout and proven 36mm chassis of the modern day Bomber Z1, the new Z1 Coil retains the renowned Grip damper but swaps out the air spring assembly for the most advanced coil spring system Marzocchi has ever made. At the heart of this new coil system is an ultra-lightweight tempered silicon-chromium steel spring (available in 4 spring rates to suit a wide range of riders) coupled with a noise management system for near silent performance, an integrated air assist for progressivity and bottom-out control, and an external preload adjuster to dial in sag and firmness off the top. Travel can easily be changed in 10mm increments from 150-180mm (depending on wheel size) via included reconfigurable internal spacers.
- Ultra-lightweight tempered silicon-chromium steel spring (Medium Spring included)
- Noise management system for near silent performance
- Integrated air assist for progressivity and bottom-out control
- External preload adjuster to dial-in sag and firmness off the top
- Travel can easily be changed in 10mm increments from 150-180mm (depending on wheel size) via included reconfigurable internal spacers
- Additional springs sold separately to fine-tune and adjust for rider preference
- Rake: 44mm
$144.99
Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when originally introduced in 1999, and they have since gone on to change the standards that all forks are judged by.
Features:
- Fully redesigned
- Laboratory tested and team proven
- New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance
- All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race
- New, optimized, 4mm dropout shape for grind and peg clearance
- Updated 7075-T6 pre-load bolt, US Pat. No. 7,591,474
- Proven 41-Thermal processed 4130 chromoly
- Legendary lifetime replacement warranty
Specs:
- 25mm steep offset
- 3/8-inch axle slots only
- 990 brake mounts
- Starting at 2lb 2oz (912 grams)
$159.99
Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when they originally introduced them in 1999, and they have since gone on to change the standards that all forks are judged by. Their new R-Series forks continue this tradition.
FEATURES
- Fully redesigned.
- Laboratory tested and team proven.
- New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance.
- All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race.
- New, optimized, 4mm dropout shape for grind and peg clearance.
- Updated 7075-T6 pre-load bolt
- Proven 41-Thermal processed 4130 chromoly
- Legendary lifetime replacement warranty
SPECS
- 32mm traditional offset
- 3/8” axle slots only Starting at 1lb 15.2oz (885 grams)
$174.99
Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when they originally introduced them in 1999, and they have since gone on to change the standards that all forks are judged by. The new R-Series forks continue this tradition.
FEATURES
- Fully redesigned.
- Laboratory tested and team proven.
- New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance.
- All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race.
- New, optimized, 4mm dropout shape for grind and peg clearance.
- Updated 7075-T6 pre-load bolt
- Proven 41-Thermal® processed 4130 chromoly
- Legendary lifetime replacement warranty
SPECS
- 25mm traditional offset
- 3/8” axle slots only Starting at 1lb 15.2oz (885 grams)
$119.99
From the pavement to the gravel, Origin-8's Cromo-Lite Disc Road Fork is made to explore. Crafted from super tough 4130 cromoly, it provides a comfortable ride with room for 28c tires for added control. And, it features mounts for disc or caliper brakes so you can ride your way.
$178.49
Upgrade your road rig with Origin-8's Cromo-Lite II Road fork. It features full cromoly construction for a sublimely smooth ride.
$279.99
Upgrade your road rig with Origin-8's Synergy Fork. It features an 4130 chromoly-steel steerer with oversize, carbon fiber legs to soak up road chatter. With a striking 3K weave finish, the Synergy fork looks as nice as it rides.
$289.99
Upgrade your road rig with Origin-8's Pro Pulsion Synergy Fork. It features an aluminum steerer with oversize, carbon fiber legs to soak up road chatter. With a striking 3K weave finish, the Synergy fork looks as nice as it rides.
$219.95
Get the advantages of a carbon fork at a sweet value with Ritchey's Comp UD Carbon Fork. The Comp reduces road vibration thanks to the inherent qualities of carbon. Plus, this fork is light and durable, making it a fine upgrade for any road bike.
$329.95
With vibration-muting carbon blades, and alloy steerer and crown, the Comp carbon/alloy cross and road fork is ideal for cyclocross pursuits or road riding.
- Material: carbon blades / alloy steerer, crown, and dropouts
- 1-1/8" straight steerer
- Steerer length: 300mm
- Axle-crown: 391mm
- Rake/Offset: 48mm
- Crown diameter: 45mm (1-1/8")
- Spacing: 57mm
- Minimum tire clearance: 6mm
- Wheel compatibility: 700c
- Fender mounts
$499.95
Ritchey's history with cyclocross runs long and deep, sort of like the mud sections of your favorite 'cross course. The WCS Carbon Cross Disc Fork is designed from the ground up to manage the unique stresses a disc brake demands, including a carbon layup that resists twisting under hard braking. Decades of experience between the course tape and building the bikes and components designed to win inform the performance and design details of this fork. It employs a monocoque construction, it's compatible with standard and integrated headsets, and it features carbon dropouts and post disc mount.
- Material: carbon fiber
- 1-1/8" straight steerer with integrated 45-degree crown race
- Fits 1-1/8 and 44mm headtubes with appropriate headsets
- Quick release (not included)
- Post Mount disc brake
- Disc brake rotor compatibility: 140 / 160mm
- Steerer length: 300mm
- Crown diameter: 45mm (1-1/8")
- Fork length: 395mm
- Rake/Offset: 45mm
- Spacing: 54mm
- Minimum tire clearance: 6mm
- Wheel compatibility: 700c
- Weight: 410g (with uncut steerer / not including axle)
$579.95
Ritchey's history with cyclocross runs long and deep, sort of like the mud sections of your favorite 'cross course. The WCS Carbon Cross Disc Fork is designed from the ground up to manage the unique stresses a disc brake demands – including a carbon layup that resists twisting under hard braking. Decades of experience between the course tape, and building the bikes and components designed to win, inform the performance and design details of this fork. It employs a monocoque construction, it's compatible with standard and integrated headsets, and features carbon dropouts and disc mount.
- Blade: Carbon
- Crown: Carbon
- Steerer: Carbon
- Steerer Length: 300mm
- Steerer Diameter: Tapered 1-1/8 – 1.5-inch
- Rake: 45mm
- Blade Shape: Curved
- Drop out: Carbon
- Rotor size: 140mm (160 w/ adapter)
- Crown Diameter: 45mm
- Integrated 45-degree crown race
- Axle-to-Crown: 395mm
- Finish: Matte UD carbon
- Weight: 440g (w/ uncut steerer)
- Compression plug included
$619.95
With nearly 50 years of designing and building bicycles and components dedicated to adventures that go beyond limits or expectations, Tom created the new Ritchey WCS Adventure Fork for those of us that are unbound by the constraints of riding-surface type, seemingly insurmountable distances, or what you can carry on your bike.
The new one-piece carbon monocoque WCS Adventure Fork with a tapered steerer has been meticulously engineered and painstakingly built to perform with razor-sharp accuracy, deliver a high level of comfort, and offer practical features for all manner of cycling adventures. Built with High Modulus Fiber (HMF), this impeccable adventure fork offers superior strength while also reducing road chatter fatigue on those endless days and nights in the saddle. Smooth internal fiber flow in the crown/steerer area delivers the best force transfer from the crown to the shaft and offers increased impact strength for those potholes you didn’t see.
With your desire to ride far and long in any condition or under any circumstance, the WCS Adventure Fork features rack mounts for packs full of gear and a fender mount to keep the grime off you and your bike. Three multi-purpose mounts on the legs give you more places to stow the necessities you gather at the last cafe.
Welcoming flat-mount disc brake calipers, the WCS Adventure Fork also fits up to 52mm tires (700c) or 2.4” tires (650b) - depending on tire make and model – making this fork the ultimate addition to any rig assembled for the purpose of seeking, discovering and enjoying adventure.
$18.00 - $43.00
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.
$210.00 - $322.00
Premium performance at down-to-earth prices. Judy now includes all of the 30mm MTB and E-MTB forks, with axle and steerer options to match any spec. Silver level forks give you stiff steel upper tubes and TurnKey lockout.
Features
- New graphics package with E-MTB endorsement option (15x110mm)
- TurnKey lockout gives 'on/off' control
- Fits Tires up to 2.8" (15x110mm)
- Fast Black finished 30mm steel upper tubes couple stiffness and lightweight with a premium look
- Plush, highly tunable Solo Air spring
- Disc brake compatible
- Offset: 51mm (29-inches)
- Steerer Diameter: 1.5-inch Tapered
$268.00 - $376.00
With optimized material concentrated at the brace and seal area, outstanding stiffness and steering precision, and new E-MTB configured fork options with fender mounting points, Recon Silver is an all-around performer suited for any MTB or E-MTB bike.
Features
- New E-MTB endorsement options with fender mounts are appropriate for all E-bikes (15x110mm version)
- New graphics are easy to read and make a fresh impact
- Motion Control damping featuring low-speed compression adjustment to lockout
- Fit Tires up to 2.8" (15x110mm version without fenders; the use of a full fender will reduce tire clearance)
- Fast Black finished 32mm steel upper tubes couple stiffness with a premium look
$279.00
The RockShox Paragon suspension fork combines the premium level of performance and features mountain bikers have come to expect from RockShox, now with a purpose-built 700c trekking design. Its lightweight, infinitely tunable Solo Air spring and Motion Control damper allow the rider to fine tune the fork for those cherished stretches of either path or pavement. Paragon’s thoughtful design combines a unique light mount on the fork brace and fender and rim/disc specific mounts integrated into the fork legs. Even the dynamo wiring runs under a sleek integrated cover up the fork leg, keeping it safe and concealed. Paragon makes trekking both smart and simple.
- Standard with Motion Control damping featuring low speed compression adjustment
- Integrated mounts for fenders
- Unique light integration at the fork brace
- Integrated wiring and cable management for running a dynamo
- Crown Race: 30mm
- Offset: 46mm
- Steerer Tube Length: 262mm
- Positive Spring: Air
- Negative Spring: Air
- External Adjustments: Rebound Damping , Low Speed Compression Damping
- Maximum Tire Width: 45mm
Page 1 of 3
Next page