Filter By:
- Rigid (92)
- Suspension (101)
- Show More Brands
- Show Fewer Brands
Forks

$525.00
Whisky poured over every detail, pushed the limits and broke new ground during the creation of the No.9 Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough sections for an astoundingly plush ride. The delightfully stiff and compliant UD carbon fiber construction, tapered steerer, and 15mm thru-axle ensure minimal weight and precise handling. It all results in an enhanced riding experience and adds up to performance that you can count on.
- Custom DT RWS Skewer included
- 3.0" max recommended tire size
- Axle to Crown Length: 480mm
- Brake Mount: IS Disc Brake 160mm
- Crown Race: 40
- Defined Color: Black
- Front Axle: 15 x 100mm
- Offset: 51mm
- S.H.I.S. Stem Clamp Diameter: 28.6
- Steerer Type: Tapered
- Weight: 750 grams
- Wheel Size: 29-inch
$565.00
For carving XC courses, going the distance on gravel roads, or roaming along bikepacking routes, the Whisky No.9 MTN Boost Fork brings a new dimension to your mountain bike. Lighter and stiffer than a suspension fork, it’s long enough to replace forks with 120mm to 130mm of travel. The boost 110mm spacing means your current wheels will likely bolt right in, and clearance for up to a 29 x 3.0" or 27.5 x 3.0" tire lets you alter your setup for wherever you’re riding. The Three-Pack mounts handily hold extra water, camping gear, tools, tubes, and more.
- 15mm thru-axle with 110mm Boost spacing
- Post-style brake mount
- 1.5" tapered carbon steerer
- Two sets of Three-Pack mounts
- ASTM Condition 3 - For rough off-road riding and jumps less than 24"

$387.00
ENVE's Road Fork is the fork by which all others are judged, built for road cyclists looking for the optimal balance of weight, strength, and stiffness.
When everyone was turning away from the fork aftermarket, we focused our efforts on creating the best aftermarket fork we could. By following our mantra of functional simplicity, we developed a manufacturing process that allows the fibers in an ENVE fork to run continuously from the top of the steerer to the bottom of the drop-outs. The ENVE forks feature a hollow one-piece design free of bonding or drilling, and the brake bolt hole is molded into the crown, allowing for additional weight savings and strength. You can literally put an ENVE fork on a bike within minutes of it leaving the mold. While this manner of construction is novel, the real win is that the majority of artisan frame builders and customers choose ENVE as their fork of choice due to its confident on-road performance and handling characteristics.

$550.00
A purpose built carbon fiber fork for gravel and cyclocross applications featuring internal hose routing, flat mount brake compatibility, and clearance for up to 50mm tires. This fork is perfect for gravel riders looking for more clearance, weight savings, compliance, and the versatility of fender mounts to enhance their gravel grinding experience.
- Material: Carbon
- Weight: 520g
- Steer Tube Length: 350mm
- Rake: 50mm
- Axle To Crown: 395mm
- Max Rotor Size: 140mm – 160mm
- Max Tire Clearance: 700c x 50c, 27.5 x 2.25-inch
- Crown Race Diameter: 1.5-inch
- Torque Spec - Steer Tube: 5.5Nm
- Torque Spec - Axle: 8Nm

$1,001.00
A striking balance of low weight and exceptional downhill performance, the SID finds a new level of confidence and defines what modern XC race bikes are capable of. The SID Ultimate is built with more travel, an all-new stiff 35mm chassis that features our lightest damper to date, and the new Charger Race Day. This race-ready package also includes the redesigned DebonAir air spring, tuned specifically for the demands of XC riders. Our friends at SKF and Maxima Plush Fluids come along for the ride, providing long-lasting fork performance and improved overall suspension feel. Lighter and more capable than ever before, SID will get you to the finish line faster.
Features
- New 35mm chassis is the perfect blend of low weight and stiffness for the modern XC bike
- New Charger Race Day Damper - our lightest production damper with rock-solid lockout
- New DebonAir air spring is tuned specific to meet the demands of XC and maintains a higher ride height for increased confidence and control
- New Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel
- Maxima Plush damping fluid reduces friction and silences damper noise
- Machined/anodized crown
- 2-bolt mounts to fit a short fender (RockShox fender sold separately)
- Ultimate foil graphics package

$483.00
With bigger bikes there comes bigger demands. Thankfully, we created the 35 Gold to meet all of them, both in performance and value. Whether you have an E-MTB or MTB, the burly 35 Gold checks the box with our proven DebonAir spring and Motion Control damping. And new this year is an E-MTB-focused option with mounting points for optional full or short fenders. All told, you might wonder how we packed so much quality and performance into such a wallet-friendly package.
Features
- New E-MTB endorsement options with fender mounts are appropriate for all E-bikes (1.8" taper available)
- New graphics are easy to read and make a fresh impact
- Motion Control damping featuring low-speed compression adjustment to lockout
- Highly tunable DebonAir spring offers a consistent feel throughout the travel
- Fits Tires up to 2.8" (without fenders; the use of a full fender will reduce tire clearance)
- Fast Black finished 35mm aluminum upper tubes couple stiffness and lightweight with a premium look
- Offset: 44mm

$1,107.00
- 35mm chassis with a focused all-mountain mindset - satisfyingly stiff, efficient and designed to eliminate as much weight as possible.
- ButterCups block 20% of high frequency "trail chatter". Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control.
- Charger 3 features a new Internal Floating Piston (IFP) design with better fidelity, performance and truly independent adjustments without any "cross talk".
- DebonAir+ is built to balance butter-like small bump feel, increased air volume, and higher overall ride height
- Ultimate Bushing Package maximizes the fork's bushing overlap, reducing friction and creating the smoothest ride possible
- Pressure Relief Valves eliminate unwanted air pressure build up in the lower leg caused by variations in altitude or temperature.
- RockShox premium short fender included

$843.00
- 35mm chassis with a focused all-mountain mindset - satisfyingly stiff, efficient and designed to eliminate as much weight as possible.
- Charger RC damper featuring Low Speed Compression adjust
- DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep.
- RockShox premium short fender included
- Maxima Plush damping fluid reduces friction and silences damper noise

$219.95
Get the advantages of a carbon fork at a sweet value with Ritchey's Comp UD Carbon Fork. The Comp reduces road vibration thanks to the inherent qualities of carbon. Plus, this fork is light and durable, making it a fine upgrade for any road bike.

$1,049.00
Charge Hard.
Based on the solid foundation of our D1 platform, this is the E1 series. Though many E suspension platforms take an approach of increased compression damping and higher air pressure, we knew there was more to it. The approach was to make a comfortable ride that maintained control when pushed hard. E-MTB's provide the luxury of ripping both up and down the trail. Due to this, comfort was paramount as you pedal over obstacles at high speed. Increasing compression damping wasn't the simple answer. Our D1 damper maintains a lighter compression tune for a supple ride that keeps you fresh until the battery runs out.
Due to the added weight and mileage from an E-MTB, we increased the bushing overlap within the casting. This provides two benefits—structural stability and longevity. When pushed hard, the increased overlap maintains structural integrity for precise steering in big hit situations. Durability also comes into play with the luxury of riding farther in a shorter amount of time. The new bushing design will allow you to rack up the miles without the loss in performance.
It's a simple approach, but aren't those always the best. Small changes equate to big advantages on the trail. This is the E1 series.
- 67% More Bushing Overlap
- D1 Damper
- Compression Bladder
- OTT Off the Top Adjuster
- Shim Stack Controlled Damping

$779.00
Riders have been asking for it, and Marzocchi heard the call and has proudly delivered. The new Z1 Coil builds on the legacy of the single-crown fork that started the revolution way back in the '90s – the O.G. Bomber Z1 Coil. Starting with the stout and proven 36mm chassis of the modern day Bomber Z1, the new Z1 Coil retains the renowned Grip damper but swaps out the air spring assembly for the most advanced coil spring system Marzocchi has ever made. At the heart of this new coil system is an ultra-lightweight tempered silicon-chromium steel spring (available in 4 spring rates to suit a wide range of riders) coupled with a noise management system for near silent performance, an integrated air assist for progressivity and bottom-out control, and an external preload adjuster to dial in sag and firmness off the top. Travel can easily be changed in 10mm increments from 150-180mm (depending on wheel size) via included reconfigurable internal spacers.
- Ultra-lightweight tempered silicon-chromium steel spring (Medium Spring included)
- Noise management system for near silent performance
- Integrated air assist for progressivity and bottom-out control
- External preload adjuster to dial-in sag and firmness off the top
- Travel can easily be changed in 10mm increments from 150-180mm (depending on wheel size) via included reconfigurable internal spacers
- Additional springs sold separately to fine-tune and adjust for rider preference
- Rake: 44mm

$119.99
• Cantilever brake mounts
• Chromoly construction
• Threadless fork
• For 26-inch wheels
• 250mm steerer length
• 1 1/8-inch steerer diameter

$99.99
• High-tensile steel construction
• Springer suspension
• Threaded
• 1-inch diameter (7/8-inch inner diameter)
• 20-inch version steerer length: 148mm
• 26-inch version steerer length: 180mm

$843.00
The new Rudy is a perfect match for your gravel bike. It's energy-efficient for straightaways and offers enough travel to keep you comfortably in control when things get rough. Featuring all-new 30mm upper tubes built around the Charger Race Day damper (our lightest damper ever) and our proven SoloAir spring. Rudy offers precise steering, full or short fender compatibility, and the looks to make your road bike proud. Everything designed with the needs of gravel riders in mind.
- Purpose-built and laser-focused on gravel and e-gravel bikes
- 30mm upper tubes are light and look the part
- 30mm and 40mm travel options
- Charger Race Day damper tuned for gravel needs with rock-solid lockout and a full range of rebound adjust
- Solo Air spring perfectly tuned for shorter travel and efficiency over bumps
- Short fender compatibility with a 3-bolt system
- Full fender compatibility with custom stealth stay bosses
- Lightweight machined and anodized crown offers a premium and durable finish
- Maxima Plush damping fluid reduces friction and silences damper noise
- Up to 700x50 tire clearance
- Available in new Kwiqsand Signature colorway or Gloss Black
- E-bike approved

$1,049.00
Own the mountain with the award-winning 36 Performance, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability.
- Black anodized upper tubes
- FIT damper and EVOL air spring
- Low friction seals for improved performance
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment

$949.00
Designed not only for the race down but the also ride up. Holding onto every critical line, Lyrik Ultimate features an updated DebonAir air spring paired with our Charger 2.1 damper for unmatched trail control and precision. Ultra-low friction SKF wiper seals and Maxima Plush damping fluid all work overtime to reduce friction, silence noise, and provide unmatched fork performance sunup to sundown.
- Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain
- Designed to reduce hand fatigue and fight unwanted friction, the Charger 2.1 damper increases confidence and control over every trail
- Charger 2.1 RC2 damper featuring independent high and low-speed compression adjust
- Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel
- Maxima Plush damping fluid reduces friction and silences damper noise
- Ultimate foil graphics package

$999.00
Diamond For The Rough.
In a time where standards are being reinvented every day, it's important to look through the clutter to find clarity. Find out what's actually here to stay and make an impact. We start with a simple question: What's going to improve the product and rider?
The new Diamond has a host of features to cater to the aggressive rider who demands more. We gave the fork a top to bottom chassis overhaul with 10mm wider BOOST spacing that amplifies steering precision and control in the moments of "ultimate shred". We also increased the tire clearance, allowing you to utilize a bigger tire and still have clearance for mud.
Six clicks of low-speed compression give quick access to firming up the fork for pedaling, opening up for descending, and mid settings for everything in between. Over thirty clicks of High-Speed Compression give precise control for support on big hits. Shim stack controlled rebound that is 100% dynamic which means the rebound is controlled based on the speed at which oil flows through the system. The fork will react to what you throw at it and be ready for what's next. Our industry-exclusive OTT feature really sets DVO products apart from anything else. It allows you to perfectly fine-tune how the initial stroke feels without any mid/end stroke compromise. You really get the best of both worlds.
Combining the stiff chassis characteristics with our exclusive features and damping design gives our forks a unique ride feel unlike anything else on the market.
- D1 Damper
- Compression Bladder
- OTT Off the Top Adjuster
- Shim Stack Controlled Damping

$100.00
The beautiful Big Block track fork is now available in 1-inch and 1-1/8-inch sizes. Lugged crown, matching tips, straight blades, and looks that will make your heart melt. It’s the perfect replacement fork for nearly any track bike.
- Material: Full 4130 High Quality Chromoly tapered fork blades, lugged crown, and matching dropouts
- Axle to Crown Measurement: 375mm
- Offset: 32mm
- Steerer Tube Length: 300mm
- Spacing: 100mm
- Tire Clearance: 32c
- Brakes: Mid Reach

$537.00
Revelation is all grown up and ready to explore, wherever the trail may turn. Value-packed, the Revelation features an updated DebonAir spring paired with a Motion Control damper and 35mm Fast Black upper tubes.
- Updated highly tunable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain
- Motion Control damping featuring low-speed compression adjustment to firm
- Chassis is derived from the renowned Pike fork
- New graphics package for a fresh, premium look

$1,159.00
- 38mm chassis for increased stiffness and rider confidence
- ButterCups block 20% of high frequency "trail chatter". Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control.
- Charger 3 features a completely new Internal Floating Piston (IFP) design with better fidelity, performance and truly independent adjustments without any "cross talk".
- DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume, and higher overall ride height.
- Ultimate Bushing Package maximizes the fork's bushing overlap, reducing friction and creating the smoothest ride possible
- Pressure Relief Valves eliminate unwanted air pressure build up in the lower leg caused by variations in altitude or temperature
- Includes premium short fender

$18.00 - $43.00
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.

$45.99 - $49.99
• Caliper brake mounts
• 35mm rake
• High-tensile steel construction
• 1-inch steerer diameter
• 185mm steerer length
• Threaded fork
• Compatible with 20-inch wheels

$109.99
- Replacement urban threadless forks
- Accepts up to 40mm tire width
- Chromoly construction
- 1-1/8" steer tube
- Size: 700C
- Steerer Type: Threadless
- Steerer Length: 300mm
- Material: Chromoly
- Offset: 45mm
- Axle-to-Crown: 405mm
- Race Diameter: 30mm
- Axle: QR

$59.99
- Hi-tensile steel construction
- Available with brake studs or without
- 60mm rake
- Type: Cruiser Size: 26"
- Steerer Type: Threaded Steerer
- Steerer Length: 250mm
- Axle-to-Crown: 400mm
- Axle: 3/8"
- Thread Length: 125mm
- O.L.D.: 100mm

$769.00
Competition drives innovation, and as cross-country athletes and course designers push the boundaries of lightweight components, 32 Step-Cast Performance rises to meet the demand. A redesigned crown for 2020 increases stiffness to the same level as the trail-proven 34. The distinct shape of the Step-Cast chassis uses a narrow stance to save weight and the step design makes room for the spokes and brake rotor.
- Black anodized upper tubes
- 32 mm upper tubes and ample bushing overlap for a quality ride
- Hollowed out lower legs provide even more weight savings
- FIT GRIP damper and FLOAT air spring
- Performance Series black-on-black graphics package

$1,149.00
FOX 38 Performance Elite Suspension Fork is the long-travel enduro specialist. It redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. Performance Elite forks retain the same adjustments, features, dampers, weight, and 7000 series aluminum upper tubes as Factory Series, but have black anodized stanchions.
- GRIP2 damper includes Fox's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance
- Next generation FLOAT EVOL with larger negative air chamber increases small bump sensitivity
- Floating axle design provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality
- Lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button
- Equipped with a quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release
- Lower leg bypass channels alleviates air pressure by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping

$599.00
The Firestarter carbon fork is made from high-modulus carbon fiber, built for all-terrain riding. Three-Pack mounts on each leg give you room for water or Anything Cages, and mid-blade mounts accommodate racks for panniers. This fork is light, tough, and ultra-versatile with the capacity to fit a wide range of tire sizes.
- High modulus carbon fiber construction
- Tapered 1-1/8" to 1-1/2" steerer tube
- 160mm minimum rotor size; 180mm maximum rotor size
- Mid-blade mounts for low rider racks
- Compatible with wheel sizes: 27.5+, 29", 29+, 700c
- Dual sets of Three-Pack mounts on each fork leg for Anything Cages or water bottles
- BOOST 110 x 15mm thru axle included
- Front Axle Size: 15 x 135L, TP=1.5, TL=10
- Internal routing for 110 BOOST dynamo hubs

$969.00
34 Factory is the ultimate trail companion. Featuring an EVOL air spring, choice of dampers, and a lightweight yet robust chassis, you can count on 34 to get up and down the mountain, every time.
- Genuine Kashima Coating on upper tubes
- FLOAT EVOL air spring

$889.00
36 E-Optimized Performance forks are made specifically for the rigors of E-Bikes with a stouter chassis and longer durability due to adding material to strengthen critical areas. The design also uses tuning originally done for Enduro use, which fits the needs of the E-MTB and overall E-Bike uses.
- Black anodized upper tubes
- FIT GRIP damper and FLOAT air spring
- E-Bike Chassis
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment

$209.99
Upgrade your road rig with Origin-8's Cromo-Lite II Road fork. It features full cromoly construction for a sublimely smooth ride.

$376.00 - $408.00
Premium performance at down-to-earth prices. Judy now includes all of the 30mm MTB and E-MTB forks, with axle and steerer options to match any spec. Gold level gives you aluminum upper tubes and Motion Control damping.
Features
- New graphics package with E-MTB endorsement option (15x110mm)
- Motion Control damping featuring low-speed compression adjustment to lockout
- Fits Tires up to 2.8"
- Fast Black finished 30mm aluminum upper tubes couple stiffness and lightweight with a premium look
- Highly tunable Solo Air spring

$99.99
- Hi-Tensile steel construction
- 135mm fat tire front hub spacing
- Steerer Type: Threadless
- Steerer Size: 1-1/8-inch
- Steerer Length: 275mm
- Brake Mount: Is Disc
- Rake: 45mm
- Axle-to-Crown: 450mm
- Race Diameter: 30mm
- Axle: QR 9mm

$79.99 - $89.99
• Caliper brake mounts
• 385mm axle-to-crown
• Chromoly construction
• 1-inch steerer diameter
• Threaded fork

$109.99
• Cantilever brake mounts
• 45mm rake
• Chromoly construction
• 1-inch steerer diameter
• 200mm steerer length
• Threaded fork

$59.99 - $65.99
• Cantilever brake mounts
• High-tensile steel construction
• Threaded fork
• Steerer diameter: 1-inch
• Steerer length: 200mm
• For bikes with 26-inch wheels

$790.00
- 35mm chassis at home on the trail - stiff, playful, and light, really light
- Charger RC damper featuring Low Speed Compression adjust
- DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep.
- RockShox premium short fender included
- Maxima Plush damping fluid reduces friction and silences damper noise

$612.00
One of the most successful and hard-working RockShox forks of all time capitalizes on the innovations born from SID. It features a chassis that combines classic XC performance with light trail duties, while a Motion Control damper completes the package, making Reba more capable than ever before.
Features
- New graphics package for a fresh, premium look
- Highly tunable Solo Air spring
- TwistLoc and OneLoc remote compatible

$89.99 - $99.99
• Caliper brake mounts
• 45mm rake
• Chromoly construction
• Threadless fork
• 300mm steerer length

$339.99
- Monark style linkage fork for vintage cruisers
- Full chromoly construction
- Disc or Drum brake mounts (160mm Max rotor)
- Size: 26"
- Rake: 57mm
- Axle-to-Crown: 417mm
- Axle: 3/8"
- O.L.D.: 100mm

$949.00
With a FLOAT EVOL air spring and on-the-fly compression adjustability, 32 Taper-Cast Factory delivers just enough tunable travel to take the edge off of wherever your gravel adventures may lead you.
- 700c chassis with clearance for large volume tires (50 mm max)
- Kashima Coated 7000 series aluminum stanchions and 12x100mm bolt-on thru axle
- FLOAT EVOL Air Spring and FIT 4 damper, featuring three on-the-fly settings - Open, Medium, and Firm
- Lightweight air spring optimized for short-travel
- Lightweight 32mm Step-Cast chassis with Lower Leg Air/Oil Bypass Channels
- Integrated full fender mounts (700c x 45 mm max with fender)

$1,139.00
36 E-Optimized Factory forks are made specifically for the rigors of E-Bikes with a stouter chassis and longer durability due to adding material to strengthen critical areas. The design also uses tuning originally done for Enduro use, which fits the needs of the E-MTB and overall E-Bike uses.
- Genuine Kashima Coating on upper tubes
- FIT GRIP2 Damper and FLOAT air spring
- E-Bike Chassis
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment

$1,039.00
Competition drives innovation, and as cross-country athletes and course designers push the boundaries of lightweight components, 32 Step-Cast Factory rises to meet the demand. A redesigned crown for 2020 increases stiffness to the same level as the trail-proven 34. The distinct shape of the Step-Cast chassis uses a narrow stance to save weight and the step design makes room for the spokes and brake rotor.
- Genuine Kashima Coating on upper tubes
- 32 mm upper tubes and ample bushing overlap for a quality ride
- Hollowed out lower legs provide even more weight savings
- FIT4 damper and FLOAT air spring

$549.00
Whether you’re racing to make it to your meeting across town or striving for a personal best down your favorite new trail, the AWL e-SUV fork will get you there on time and in style. Featuring an all-new chassis, RAIL damper, and different travel options, the AWL is equipped to forgive rock and roots as well as curbs and potholes. Includes integrated mounts for fenders, lights and accessories.
- Award-winning RAIL damper delivers premium suspension performance with simple yet effective adjustability and maximum durability
- Stiff 34mm e-optimized chassis meets the most stringent e-bike testing standards
- Integrated fender and light mounts delivery maximum versatility
- Clearance for tires up to 2.6” wide
- 160-230 mm rotor compatible

$1,019.00
The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths.
- Step-Cast chassis
- Genuine Kashima Coating on upper tubes
- FIT4 damper and FLOAT EVOL air spring
- Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities

$859.00
With a FLOAT EVOL air spring and on-the-fly compression adjustability, 32 Taper-Cast Performance Elite delivers just enough tunable travel to take the edge off of wherever your gravel adventures may lead you.
- 700c chassis with clearance for large volume tires (50 mm max)
- Black anodized 7000 series aluminum stanchions and 12x100mm bolt-on thru axle
- FLOAT EVOL Air Spring and FIT 4 damper, featuring three on-the-fly settings - Open, Medium, and Firm
- Lightweight air spring optimized for short-travel
- Lightweight 32mm Step-Cast chassis with Lower Leg Air/Oil Bypass Channels
- Integrated full fender mounts (700c x 45 mm max with fender)
- Performance Series black-on-black graphics package

$1,149.00
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability.
- Genuine Kashima Coating on upper tubes
- FIT damper and FLOAT EVOL air spring
- Low friction seals for improved performance
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment
- Updated Crown Design saves up to 20 grams, and offers significant structural improvements

$1,139.00
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability.
- Genuine Kashima Coating on upper tubes
- FIT damper and FLOAT EVOL air spring
- Low friction seals for improved performance
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment

$1,089.00
The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths.
- Step-Cast chassis
- Genuine Kashima Coating on upper tubes
- FIT4 damper and FLOAT EVOL air spring
- Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities
- Kabolt Thru Axle

$650.00
There is beauty in simplicity and it's hard to argue with the simplicity of an unsuspended mountain bike. Despite its uncomplicated nature, ENVE's rigid Mountain Fork is loaded with unique features such as a removable fender, disc brake hose clip, and reversible axle inserts to fine tune the rake of the fork to match your ride preference and application.
- Material: Carbon Fiber
- Steerer Tube Length: 300mm
- Rake: 44, 52 Adjustable
- Axle to Crown: 470mm
- Brake: Disc
- Max Rotor Size: 180mm
- Max Tire Clearance: 3.4-inch
- Crown Race Diameter: 1.5-inch
- Torque Spec: Steer Tube: 5.5 Nm
- Torque Spec: Axle: 8Nm
- Weight: 711g (w/ fender), 686g (w/ clasps)

$575.00
The ultimate aftermarket disc brake specific road cycling fork featuring 32mm of tire clearance and solid 12mm thru-axle for secure and confident handling. Building upon nearly a decade of experience making the world's best forks, ENVE's latest road disc fork features a modern 32mm of tire clearance, a low axle-to-crown height of 370mm, internal hose routing, and a lightweight one-piece form construction developed specifically to handle the demands of disc brakes, rough roads, and large volume tires.
- Material: Carbon Fiber
- Steerer Tube Length: 350mm
- Rake: 43, 50mm
- Axle to Crown: 370mm
- Brake: Disc
- Axle Compatibility: 12mm
- Max Rotor Size: 160mm
- Max Tire Clearance: 32mm
- Crown Race Diameter: 1.25
- Torque Spec: Steer Tube: 5Nm
- Torque Spec: Axle: 8Nm
- Weight: 425g

$414.00
Now you can update your 2010+ BoXXer Race, Team, RC, R2C2 and World Cup with the Charger Damper Upgrade Kit. The Charger is RockShox’s insanely refined damper, and its sealed construction with an expandable rubber bladder ensures damping consistency, reduces vibration, and is almost 100 grams lighter than the previous BoXXer damper. Adjustment is easy and intuitive, with a single compression adjuster and a beginning stroke rebound adjuster with a factory set Rapid Recovery tune. The internal shim stacks can be re-tuned for light or firm compression and rebound settings.
Includes damper, syringe, and suspension fluid.

$699.00 - $729.00
The Z1 is freedom from the status quo. Step outside enduro's obsession with counting seconds and go have some fun in the woods. The Z1 is an aggressive all-mountain and enduro fork with a different viewpoint for riders' priorities. Everyone wants suspension performance that's smooth as butter with great traction and control, and that's where the Z1 shines. After that, the Z1 departs from industry norms. More time fiddling with adjustments means less time shredding the trails. The Z1 keeps it simple with intuitive compression sweep adjustment, from locked out to full open. Simple rebound adjustment covers the range from fast to slow rebound for a full range of rider weights and preferences without overcomplicating things. Plus, it's biased towards stiffness, ride performance, and durability, so while it's carrying a few extra grams, you probably won't notice because you're having too much fun.
- 36mm stanchions
- Enhanced lower leg stiffness with "M" arch design for maximum tire clearance
- 15 QR x 110mm Boost axle
- FIT GRIP damper with adjustable compression and rebound
- FLOAT EVOL air spring

$49.39
Economically priced hi-tensile steel MTB fork for 26-inch wheels.
- Steerer Type: Threaded Steerer
- Size: 1" (7/8 ID)
- Steerer Length: 198mm
- Rake: 45mm
- Axle-to-Crown: 393mm
- Race Diameter: 27mm
- Axle: 3/8"
- Thread Length: 95mm

$569.00
The Kingpin Deluxe fork is perfect for fat bike expeditions, keeping you nimble even when fully loaded. Dual Three-Pack mounts on each leg let you attach water bottles or Anything Cages, and mid-blade mounts fit low rider racks for panniers. Or, ditch the gear and hit the trails with an ultra-light and responsive fork.
- High modulus carbon fiber construction
- Tapered 1-1/8" to 1-1/2" steerer tube
- 160 minimum rotor size; 203mm maximum rotor size
- Dual sets of Three-Pack mounts on each fork leg for Anything Cages or water bottles
- Mid-blade mounts for low rider racks
- Internal routing for 150mm spaced dynamo hubs
- Maximum Tire / Rim sizes: 26 x 5", 27.5 x 4.0", 29 x 3.0"
- 150 x 15 mm thru axle included
- Front Axle Size: 15 x 198L, TP=1.5, TL=9

$569.00
The Cutthroat carbon fork is full of features, ready for any adventure.
- Full Carbon fork, tapered steerer
- Fits 29 x 3.0" tires
- Three-Pack mounts
- Crown light mount
- Includes Salsa Deadbolt Ultralight Thru-Axle
- Axle to Crown Length: 483mm
- Brake Mount (Fork): Flat Mount 160mm
- Color: Matte Black
- Crown Race: 40mm
- Defined Color: Black
- Front Axle: 15mm Thru x 110mm
- Material: Carbon
- Offset: 51mm
- S.H.I.S. Stem Clamp Diameter: 28.6mm
- Steerer Type: Tapered
- Steerer Tube Length (mm): 350mm
- Weight: 730g
- Wheel Size: 29" , 29+
- Max Rotor Size (Fork): 180mm
- Maximum Tire Clearance (Fork): 77mm

$579.95
Ritchey's history with cyclocross runs long and deep, sort of like the mud sections of your favorite 'cross course. The WCS Carbon Cross Disc Fork is designed from the ground up to manage the unique stresses a disc brake demands – including a carbon layup that resists twisting under hard braking. Decades of experience between the course tape, and building the bikes and components designed to win, inform the performance and design details of this fork. It employs a monocoque construction, it's compatible with standard and integrated headsets, and features carbon dropouts and disc mount.
- Blade: Carbon
- Crown: Carbon
- Steerer: Carbon
- Steerer Length: 300mm
- Steerer Diameter: Tapered 1-1/8 – 1.5-inch
- Rake: 45mm
- Blade Shape: Curved
- Drop out: Carbon
- Rotor size: 140mm (160 w/ adapter)
- Crown Diameter: 45mm
- Integrated 45-degree crown race
- Axle-to-Crown: 395mm
- Finish: Matte UD carbon
- Weight: 440g (w/ uncut steerer)
- Compression plug included

$599.95
Tom Ritchey was riding off-road decades before gravel riding was ever a "thing," and the new WCS Carbon Cross Gravel Fork is the manifestation of the experiences enjoyed on all of those dirty rides mixed with the legendary engineering for which Ritchey is famous. Built from life and ready for your drop bar off-road adventures, this full monocoque carbon fork delivers precision and confidence while offering stability and comfort along some of the more rugged terrain you'll encounter. With logical features—like enough room tires up to 40mm wide, the ability to run 12 or 15mm thru-axles, and ability to run flat-mount disc brakes—the Ritchey WCS Cross Gravel Fork is ideal for long-distance gravel events, your local cyclocross series, spontaneous weekend adventures, and everything in between.
- Material: carbon fiber
- 1-1/8" straight steerer with integrated 45-degree crown race
- Fits 1-1/8 and 44mm headtubes with appropriate headsets
- 100x12mm thru-axle (included)
- Flat Mount disc brake
- Disc brake rotor compatibility: 140 / 160mm
- Steerer length: 300mm
- Crown diameter: 47mm
- Axle-Crown: 383mm
- Rake/Offset: 47mm
- Spacing: 53mm
- Minimum tire clearance: 6mm
- Wheel compatibility: 700c
- Weight: 430g (with uncut steerer / not including axle)

$130.00
Surly's Steamroller Fork pairs great handling with urban utility. It has steep track geometry for lightening fast response, making it as at home on the velodrome as it is flying downtown with cars and pedestrians. It features a flat crown, drilled to accept a standard-reach caliper brake, and the use of wide 38mm tires. And its stealthy Black powdercoat means your opponents in the Pursuit race will never see you coming!

$175.00
Designed around Surly's updated Krampus frame (but also employed on the updated Karate Monkey frames as well), this fork has 15mm thru-axle dropouts spaced at 110mm and clearance for up to a 29 x 3.0-inch tire. To accommodate such big tires it's got a longer axle-to-crown measurement than our Ogre or Karate Monkey forks, making it a perfect rigid fork option for lots of 29ers out there. The Krampus fork's blades were designed and manufactured specifically to play well with the unique forces such a long fork with big tires will encounter, and the steer tube is standard 1-1/8-inch threadless. It has line guides for a disc brake line as well as thru-blade eyelets and Three-Pack bosses on both fork legs.
- Axle-to-crown: 483mm
- Offset: 47mm
- Steerer: 260mm
- Tire Clearance: 29 x 3.0-inch
- Weight: 1180g uncut
Page 1 of 4
Next page