Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Bottom Brackets

$24.99
- Made to fit crank spindles and press-fit Mid BB frames.
- Simple and easy to install.
- Includes an assortment of spacers to optimize chainline and crank clearance.
- Odyssey 6061-T6 aluminum dust spacer included.

$359.00 - $459.00
The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design, while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for.
With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency.
The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width, and all CeramicSpeed bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product.
The ITA for SRAM DUB Road comes in two bearing options. The first option is our low drag, long life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The second option is our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag.
Compatible with:
- Frame: Italian BB
- Opening diameter: Threaded
- Shell width: 70mm
In the box:
- 2 cups with CeramicSpeed Bearings installed
- 2 dust covers
- 4 x 1mm spacers
- 10ml syringe of CeramicSpeed All Round Grease
- Sticker sheet
- Spacer tube

$54.00
The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility.
- Gutter Seal Technology drastically improves sealing against the elements
- Sealed cartridge bearings
- One oversized spindle to work across every bottom bracket standard

$63.00
Downhillers and freeriders need tough gear that can handle the abuse of big air and huge drops. TruVativ's Giga Pipe Team DH Bottom Bracket uses four sealed cartridge bearings to provide smooth pedaling season after season. For serious strength, the Giga Pipe boasts CNC-machined aluminum cups and a stiff chromoly spindle, too.

$46.00
The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility.
- Gutter Seal Technology drastically improves sealing against the elements
- Sealed cartridge bearings
- One oversized spindle to work across every bottom bracket standard

$54.00
Striking the balance between light weight, long life and durability, TruVativ's Giga Pipe Team SL Bottom Bracket uses 3 sealed cartridge bearings to provide smooth pedaling season after season. For serious strength, the Giga Pipe boasts CNC-machined aluminum cups and a stiff chromoly spindle, too.

$41.00
The SRAM DUB bottom bracket series has a simple job— to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility.
- Gutter Seal Technology drastically improves sealing against the elements
- Sealed cartridge bearings
- One oversized spindle to work across every bottom bracket standard

$54.00
The SRAM DUB bottom bracket series has a simple job—connect your crankarms and protect the smooth, long-lasting application of power to your drivetrain. To allow that singular focus, we've engineered the DUB spindle to be the one true unifying component. One oversized spindle to work across every bottom bracket standard. For better crankarm compatibility. For better protection from the elements. For longer-lasting performance. To be stronger, smoother, simpler. Now, back to the ride.
- One oversized spindle to work across every bottom bracket standard
- Greater bearing durability

$54.00
The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility.
- Gutter Seal Technology drastically improves sealing against the elements
- Sealed cartridge bearings
- One oversized spindle to work across every bottom bracket standard

$25.00
TruVativ Power Spline Bottom Bracket fits proprietary powerspline design popular as OE spec with many moderate-price TruVativ cranks.
• Proprietary spline design popular as OE spec with many moderate-price TruVativ cranks
• Crank bolts are included

$59.99
Race Face bottom brackets for use with 30mm spindle cranksets in the Race Face CINCH crank family.
- Compatible with standard threaded BSA shells
- Standard 6806 retainer bearings
- Includes inner plastic sleeve and spacer; additional BB fitments can be accommodated with CINCH spacer kits
- Inner sleeve protects against water
- Rubber seal located on the bearing's external side helps to reduce the risk of water penetration

$109.99 - $144.53
The Wheels Mfg BB30 Outboard bottom bracket will give you all of the same benefits as their other Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in BB30 frames without the need for adapters. - Bearings: Enduro Angular Contact - Color: Red - Bottom Bracket/Frame Interface: BB30, Specialized Alloy OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 42mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 127g

$118.65
PF30 Threaded Angular Contact BB for Fat Bike. Fits Specialized Fatboy frames, and any other brand frames with PF30 x 100mm bottom bracket shell. Machined cups thread together for stability, increased bearing life, and simple installation and maintenance. No more creaking. Smooth operation. Fast bearing replacement. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: PF30 - Bottom Bracket Shell Width (mm): 100mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: BB30 - Crank Spindle Diameter: 30mm - Weight: 130g

$118.65
The Wheels Mfg PF30 Outboard bottom bracket will give you all of the same benefits as their well-loved Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in PF30 frames without the need for adapters. - Bearings: Enduro ABEC-3 - Color: Red - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 161g

$118.65
Thread together BB for 386EVO frames and 24mm diameter spindle cranks. Machined aluminum cups thread together for stability, increased bearing life, and simple installation and maintenance. No more creaking. Smooth operation. Fast bearing replacement.
- Bearings: Enduro ABEC-3
- Bottom Bracket/Frame Interface: BB386EVO, BB392EVO
- Bottom Bracket Shell Width (mm): 86mm - 92mm
- Bottom Bracket Shell I.D.: 46mm
- Crank Spindle Diameter: 24mm
- Over Bearing Width: 91.5mm in 86.5mm wide shell
- Over Bearing Width Dimensions include supplied silicone dust shields
- Weight: 133g
Compatible with the following Bottom Bracket Standards (46mm BB shell ID, 86 – 92mm wide BB shell) and 24.00mm diameter spindle cranks:
- BB386EVO
- BB392EVO

$123.99
T47 threaded BB cups for T47 frames and 29mm spindle diameter SRAM DUB compatible cranks. Cups have outboard bearings and can be used in BB shells with widths from 68mm to 100mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle.
T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells.
Bottom Bracket Includes:
- BB Cups with bearings
- 2x Silicone dust seals
- 2x 0.5mm crank spindle spacers
- 2x 1.0mm crank spindle spacers
- 1x 2.5mm crank spindle spacer
Specifications:
- Bearings: Enduro ABEC-3
- Bottom Bracket/Frame Interface: T47
- Bottom Bracket Shell Width (mm): 68mm - 100mm
- Bottom Bracket Shell I.D.: 47x1.0mm Threaded
- Crank Spindle Diameter: 29mm
- Over Bearing Width: 90.8mm in 68mm wide shell
- Over Bearing Width Dimensions include supplied silicone dust shields
- Tool Pattern: 48.5mm x 16-notch
- Weight: 155g
Compatible with the following Bottom Bracket Standards (47x1.0mm Threaded BB shell) and 29mm diameter spindle SRAM DUB compatible cranks:
- T47 shell with a width of 68mm and SRAM DUB Road Crank
- T47 shell with a width of 73mm and SRAM DUB MTB Crank
- T47 shell with a width of 100mm and SRAM DUB Fatbike Crank

$31.99
Shimano's Ultegra bottom bracket uses Pro Tour-proven technology for lighter weight and super smooth spinning, while still maintaining the same level of durability and stiffness. It's available in English, Italian, or Press Fit models.

$41.99
Shimano Dura-Ace BB92, BB9000 Hollowtech II Bottom Brackets
- Bottom Bracket Shell I.D.: 1.37"
- Defined Color: Black
- Weight: 65 g
- Spindle Interface Type: Shimano Hollowtech II

$45.99
Shimano BB-ES51 Octalink V2 Bottom Brackets
- Fits Shimano Octalink V2 Spline Cranksets
- Crankarm fixing bolts not included

$15.99
- Simple and reliable square taper bottom bracket
- Replaces both BB-UN26 and BB-UN55
- Sealed cartridge bearings
- Cr-Mo axle
- For bicycles equipped with a chain case, select BB-UN300-K
- For E-type front derailleur compatibility, choose BB-UN300-E
- Fixing bolts not included; Shimano FC-E6000 bolts suggested

$15.99
- Simple and reliable square taper bottom bracket
- Replaces both BB-UN26 and BB-UN55
- Sealed cartridge bearings
- Cr-Mo axle
- For bicycles equipped with a chain case, select BB-UN300-K
- For E-type front derailleur compatibility, choose BB-UN300-E
- Fixing bolts not included; Shimano FC-E6000 bolts suggested

$20.99
Shimano BB-ES300 Octalink V2 Bottom Brackets
- Fits Shimano Octalink V2 Spline Cranksets
- Crankarm fixing bolts not included

$33.95 - $40.45
Campagnolo ProTech bottom brackets feature a patented external sealing ring design that protects a strong, resilient fiberglass-charged polyamide central tube from the harmful ingress of water, mud and grit.
- Designed specifically for gravel riding and racing to protect against water, mud & grit

$27.95
- Adapters press directly into specific PF30, BB30, BB86 or BBright frames and allow the use of standard Ultra-Torque (UT) crank sets and EPS components
- Updated design increases surface area contact with the frame's bottom bracket, reducing the possibility of noise from frames with slight imperfections
- Ultra-Torque OS Fit BB-cup tool is required for adapter installation

$24.99
BB-UN26 cartridge bottom bracket.
- Smooth rotation
- Square taper spindle
- Sealed cartridge bearing assembly

$150.00
The Problem Solvers Bushnell Eccentric Bottom Bracket is the industry leading design for chain tension adjustment on tandem and dedicated single speed bikes equipped with eccentric bottom bracket shells. The classic version features full-body, aluminum construction across the shell for maximum surface area friction and additional value.
The Bushnell Fat Bike Eccentric Bottom Bracket is designed for the 100mm shells in most fat bikes.
- Accepts English threaded bottom bracket cups
- Classic, full-body design
- Diameter of part - 2.118 inches (53.78mm)
- Fits BB shells from 53.8 ~ 54mm I.D. without shim
- Fits BB shells up to 100mm width

$359.00
The PF30 standard is widely used. To make it compatible with Shimano and other 24mm diameter cranks, as well as improve the system, select this bottom bracket.
The package comes with two cups and CeramicSpeed Bearings installed. The cups have extended inner sleeves and join with a center section, reducing the likelihood of creaking and increasing the reliability of the system while also eliminating spindle rub on internal cables. The cups mate with 24/22mm crank spindles. There are two bearing options. Both Standard and Coated Bearings feature super smooth CeramicSpeed Balls and hardened-steel races. The CeramicSpeed Coated Bearings have an additional feature: a 3-micron thick metallic layer over the races. This addition makes the races smoother and harder, lowering drag and increasing life.
The CeramicSpeed Standard Bearings have only 0.3-0.4 watts of frictional drag per set, an average drag reduction of 75% compared to stock bottom brackets. This is the result of great design, including hardened-steel races and CeramicSpeed Balls that are 100% smoother and 15% harder than the ceramic competition. They also last longer.
The CeramicSpeed Coated Bearings last even longer and feature even lower drag. Life increases by 60% and drag drops by 50% compared to our CeramicSpeed Standard Bearings.
All Round Grease is installed in the bearings. It can be replaced for lower-drag TT and Track Grease or higher-durability LongLife Grease, which adds a bit of drag but stays in the bearing when riding through messy conditions.
In The Box
- 1 bottom bracket with bearings installed
- 2 dust covers
- 10ml syringe of All Round Grease
- Sticker sheet

$36.00
- BBright Bottom Bracket to Mega Exo Carbon Crank BB-PF79 (EE086)
- Spindle Interface Type: FSA MegaExo, Shimano Hollowtech II
- BB Shell Width (mm): 79 – 84.5
- Bottom Bracket Shell I.D.: 46
- BB/Frame Interface: BBright Direct Fit

$359.00
The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for.
With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency.
The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width, and all CeramicSpeed Bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product.
You have two bearing choices. The first choice is our low drag, long life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The second choice is our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag.
Compatible with:
- Frame: BB86
- Opening diameter: 41mm
- Shell width: 86.5mm
In the box:
- 2 CeramicSpeed Bearings
- 2x dust covers
- Plast-sheet
- 4 x 1mm spacers
- 10ml syringe of CeramicSpeed All Round Grease
- Sticker Sheet
Page 1 of 7
Next page