Filter By:
- Bar Ends (18)
- BMX (52)
- Bottom Brackets (205)
- Brakes/Levers/Pads (468)
- Cables (239)
- Cassettes/Freewheels (82)
- Chainrings (332)
- Chains (72)
- Show More Categories
- Cranksets (252)
- Derailleurs (115)
- Forks (126)
- Handlebar Grips/Tape (326)
- Handlebars (235)
- Headsets (182)
- Pedals (253)
- Saddles (259)
- Seatposts (78)
- Shift/Brake Combinations (42)
- Shifters (93)
- Shocks (34)
- Stems (128)
- Other (1018)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Parts

$59.99
Here For The Party
A party's just not a party until Chester shows up. This burly nylon-composite pedal is big on features, small on price, and fully ready to tear up some trail. A concave body, replaceable traction pins, and a cro-mo sealed axle are all representing.
The Full Meal Deal
A slim yet durable nylon-composite body is accented with a concave design, built-in traction treads and 8 replaceable traction pins per side.
Not Just Another Axle
Made to stand up to punishment, the durable sealed cro-mo axle rolls on a completely serviceable bearing + bushing set-up.
Bling For Your Bike
No build is complete without sick looking color-Coordinated pedals. Chester pedals come in multiple vibrant colors to choose from.
Specs
- Platform Height: 18.4mm
- # of Pins: 16 SHCS hex traction pins per pedal (8 per side)
- Platform L x W: 101 x 110mm
- Axle Material: Chromoly Steel
- Body Material: Nylon Composite
- Material: Nylon Composite
- Weight: 360g

$110.00
If variety is the spice of life, then the Moloko bar oozes umami at every bend. It offers a multitude of hand positions to keep you comfortable and in control over the course of a long day riding over varied terrain. It also has plenty of spots to mount your various accessories. Dangle a handlebar bag from it, strap some lights to it, throw a GPS on it (if that's your thing), and ride all day. It comes in a standard width of 735mm but if 685mm is more your style, don't you worry. Surly added cut marks so you can easily make it so.
- Material: CroMoly steel
- Clamp diameter: 31.8mm
- Width: 735mm; Cut marks for 685mm
- Rise: 0
- Sweep Angle: 34 degrees
- Weight: 709g
- Color: E.D. coated Black

$235.00
Our Milhouse Handlebar has the distinction of being the first and only of its kind: A full carbon moto-inspired riser bar. Featuring a 16-degree backsweep and 8-degree upsweep for comfort and control, it's tested and approved for getting rad on the roughest terrain. A statement piece for custom builders and upgraders alike, the Milhouse is equally at home on klunkers, bikepacking rigs, singletrack steeds, or simply cruising the streets with style. Trimmable ends marked with easy-to-read graphics allow you to dial in your fit for maximum confidence wherever the trail takes you.
- Unidirectional carbon fiber construction
- Trimmable ends, made easy with graphic markings
- No rider weight limit
- ASTM Condition 3 – For rough off-road riding and jumps less than 24" - 90mm clamping area to fit Salsa Anything Cradle
- 31.8mm clamp, 70mm rise, 16-degree backsweep, 8-degree upsweep
- 825mm wide
- Weight: 288g

$525.00
Whisky poured over every detail, pushed the limits and broke new ground during the creation of the No.9 Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough sections for an astoundingly plush ride. The delightfully stiff and compliant UD carbon fiber construction, tapered steerer, and 15mm thru-axle ensure minimal weight and precise handling. It all results in an enhanced riding experience and adds up to performance that you can count on.
- Custom DT RWS Skewer included
- 3.0" max recommended tire size
- Axle to Crown Length: 480mm
- Brake Mount: IS Disc Brake 160mm
- Crown Race: 40
- Defined Color: Black
- Front Axle: 15 x 100mm
- Offset: 51mm
- S.H.I.S. Stem Clamp Diameter: 28.6
- Steerer Type: Tapered
- Weight: 750 grams
- Wheel Size: 29-inch

$264.00
Meet the new standard for hard-hitting, heavy-duty braking. We added 15% extra piston power and 30% more volume in the lever reservoir, ensuring peak performance for the full run. And with SwingLink and Lever Pivot Bearing technologies, lever feel remains smooth and progressive, no matter how hard the pull. Go deeper and grab more power.
- Designed specifically for heavy-duty demands.
- Pivot bearing offers crisp lever feel and a fatigue-free ride.
- Metallic pads come standard for more power and longer wear.

$410.00
The SRAM RED AXS Crank Arm Assembly features hollow carbon Exogram crank arms for a lightweight, strong, and elegant crank. It can be paired with any SRAM AXS spider or integrated chainring, with or without power.
- The 8-bolt interface is compatible with power and non-power AXS spiders and integrated chainrings
- Not compatible with SRAM's 3-bolt direct mount interface
- Hollow Exogram carbon arms
- Spider and chainrings sold separately
- DUB spindle interface
- Compatible with all SRAM Road DUB bottom brackets
- Number of Chainrings: No Rings, No Spider Included
- Crank Intended Use: Road, Tri, Cyclocross
- Pedal Spindle: 9/16"
- Spindle Interface Type: SRAM DUB
- Chainring BCD: Direct Mount SRAM
- BB Included: No

$60.00
On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored color is available on the Zipp Service Course stem. Since the introduction of our line of Service Course and Service Course SL components, we've had amazing success with our pro-level athletes in all disciplines. While the successes have reinforced our design decisions, we have also drawn from their feedback. We not only learned how and why athletes make their equipment choices, but how our manufacturing methods and materials affect product performance. With new knowledge as well as new engineering methods, we are proud to introduce our completely redesigned line of Service Course and Service Course SL stems.
- Class-leading stiffness-to-weight ratio
- More options for a better fit
- New faceplate and geometry for greater stiffness and easier installation
- Distinctive silver finish

$50.00
Giant's Contact Comfort+ Saddle is the perfect addition to your hybrid or commuter bike. It features a pressure-relieving base and center zone cut so you'll be comfortable while riding. And, with its lightweight, water-resistant synthetic top and tough chromoly rails this saddle is bound to last.

$41.00
CONFIDENCE UPGRADE
Designed for performance road riders. The all-new Stratus Lite bar tape provides impressive comfort and superior grip thanks to the omnidirectional surface coding. At 70g, Stratus Lite is one-third lighter than the original version, and it’s easier to wrap and replace thanks to the new adhesive backing.
FEATURES:
- High-friction PU material with omnidirectional texture design offer superior anti-slip and hand feel
- Ultralightweight, 33% lighter than previous Stratus
- Unique gel adhesive backing is washable and reusable and provides easier wrapping
- Length (2160mm), Width (30mm), Thickness (3mm)
- Weight: 73g

$24.99
Durable, stretch-resistant and comfortable to the touch, Fizik's Bar Tape is the choice of many professional riders and casual cyclists. It's made of Microtex, a perforated synthetic-leather-like material that's smooth and grippy, even when wet. This thin, lightweight tape is available in a multitude of colors, too, making it the perfect match for your dream bike.

$150.00
Globally renowned and truly timeless, the B17 S Standard is the saddle that secured Brooks' place in cycling history. It's been in constant production since 1910, providing cyclists around the world with over one hundred years of sublime support and unrivaled comfort. Each B17 S Standard shapes itself to its rider, leading to a personal, customized saddle that fits like no other. The S models are shorter and wider than a normal B17 and are uniquely suited to women riders. And of course, it features Brooks' full grain, premium leather top secured by their trademark rivets for the ultimate in style and durability.

$22.99
MSW anti-slip bar tape provides positive contact with your handlebars and exceptional comfort during your most demanding rides. The flexible PU material makes this tape easy to install while the gel backing provides added comfort and clean hassle-free removal.
- PU material with anti-slip coating improves grip over traditional cork material
- Gel backing provides vibration damping and extra comfort
- Silicone adhesive for easy install and clean removal
- 78 inches (200cm) per roll
- Finishing strips and bar end plugs included

$35.00
Hurdy Gurdy is another nifty device that keeps a rear wheel from slipping forward in the dropout under pedal load. It's designed for the Cross-Check's semi-horizontal front-loading dropouts, and will also work on many other similar dropouts. Hurdy Gurdy is investment cast of stainless steel for durability and good looks, and shares many of Tuggnut's design features. Its two axle holes allow for a wide variety of fore/aft wheel positions, it will work with standard QRs, bolted axles, and nutted axles up to 10mm.

$9.99 - $12.99
The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.

$12.98 - $15.99
This mid-rise handlebar provides smooth lines and pure comfort
- Black powder coat
- 1"(25.4mm) clamp, 5.25" rise, 27" wide
- Handmade in Maysville, Kentucky

$49.99
Ellipse Relaxed features a central anatomic hole for pressure relief and 3D Skingel to guarantee maximum comfort in the ischial and perineal areas. To guard against impacts and abrasions, the Ellipse also features Double Cover, a double-layer material applied to the sides of the saddle to double resistance against impacts and abrasions. Rear elastomers are added for better shock absorption — they're effective for even the most severe and unexpected shocks, and work both vertically and horizontally for safe, silent, and permanently non-deformable performance. A patented clip system is positioned at the rear of the saddle for easy attachment of a Selle Royal saddle bag or other accessories.

$21.90
- Larger more ergonomic version of the original ST-lites
- Polycarbonate construction safe for use on carbon bars
- Comfort/riser option: use with long end toward rider
- Lifetime warranty

$69.99
Ride comfortably on even hot days with Selle Royal's Respiro saddle. It boasts a Cool Cover that keeps the saddle up to 25 degrees cooler, and an innovative ventilation channel to keep the air flowing. Complementing these extraordinary features is Selle Royal's Royalgel that eliminates pressure points for awesome plushness. And, this amazing saddle comes in three models so you can choose the perfect fit. If you want the ultimate in breezy comfort, this is it!

$13.00
Heavy duty 3/16" single speed chain great for hardcore street rippers who need the strongest chain possible.
- Extra-wide, for non-derailleur bikes: BMX, cruisers and tricycles
- Compatible with 1/8" x 1/2" single speed set-ups but oversized for extra strength and durabilityLinks (links): 98
- Width: 13.1 mm
- Drivetrain Speeds: Single Speed 1/2" x 3/16"
- Chain Connection Type: Reusable Master Link
- Half Link Chain: No
- Weight: 800g

$114.99
- DH Race tuned award-winning alloy handlebar design, developed with World Cup professionals
- Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness
- Increased strength and stiffness compared to conventional alloy bars
- Shot-peening and anodizing enhances fatigue life even further
- Adjustable to 740mm
Features
- Key Technologies: Vibrocore, Dual XGT, CNC Bending, Impact Ends, MGR Super 6 Alloy
- Material: MGR Super 6 Alloy
- Weight: ±340g (15mm) / ± 350g (30mm) / ±360g (50mm)
- Sweep: 4° up x 8° back
- Finish: Shot peen anodized, decal logos

$83.99
absoluteBLACK Oval Direct Mount 1x Chainrings for SRAM greatly improve traction and climbing abilities. They are designed for SRAM cranks that have a 3-bolt direct mount interface and removable spider. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center).
- Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding
- The unique, patent-pending narrow-wide tooth profile keeps the chain in place
- Teeth have been 3D-machined for ultimate mud shedding and quieter operation
- Provides excellent weight-to-strength ratio
- 6mm offset is designed for 135/142 spacing on standard DUB/GXP/Long-Spindle BB30, as well as 170/177 spacing on fat bike cranks

$29.99
Grippler gives you the moisture shedding, long gripping sensation you crave, with the hard wearing resilience you expect from Race Face. Our proprietary compound and diamond buff finish feels great with both gloves and bare hands - and with ramped grip profile on finger-side plus varied grip depth on palm-side, Grippler will bring you to a higher level of digitization. Available now in 10 colours, and two sizes, the Grippler surpasses industry standards for gripabilty. And now with Double Lock Ons the Grippler EVEN GRIPS ITSELF. Get a grip, with the Grippler.
- Directional ramped logo underside
- Proprietary compound extends over Dual Lock Ons
- Vibration dampening, hard wearing, moisture shedding

$59.00 - $64.00
RockShox's Maxle Lite is a lightweight aluminum through-axle system. It lets you remove and install your wheel as fast as with a standard quick-release while delivering the awesome stiffness with the improved strength and control of a through-axle. Plus, the lever can be closed in whatever position you like and no tools are required for installation and use!

$22.00
The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull.
- Reach Adjustment
- Qwik-Adjust Barrel Adjuster
- Compatible with mechanical disc brakes and linear-pull brakes

$170.00
Brooks' flagship model, the B17 Special has offered sublime support and unrivaled comfort for more than a century. A favorite of casual and high-mileage cyclists alike, each saddle shapes itself to its rider, leading to a customized ride that fits like no other. The B17 Special's top features high-grade leather secured by Brooks' trademark, hand-hammered copper rivets.

$19.00
SRAM's PowerGlide PG-820 Cassette is a fine 8-speed cassette. It features steel cogs with SRAM's DuraBlast technology for smooth, precision shifting and excellent durability.

$387.00
ENVE's Road Fork is the fork by which all others are judged, built for road cyclists looking for the optimal balance of weight, strength, and stiffness.
When everyone was turning away from the fork aftermarket, we focused our efforts on creating the best aftermarket fork we could. By following our mantra of functional simplicity, we developed a manufacturing process that allows the fibers in an ENVE fork to run continuously from the top of the steerer to the bottom of the drop-outs. The ENVE forks feature a hollow one-piece design free of bonding or drilling, and the brake bolt hole is molded into the crown, allowing for additional weight savings and strength. You can literally put an ENVE fork on a bike within minutes of it leaving the mold. While this manner of construction is novel, the real win is that the majority of artisan frame builders and customers choose ENVE as their fork of choice due to its confident on-road performance and handling characteristics.

$4.99
The Problem Solvers Cassette Spacers are made of light and durable anodized aluminum and come in different thicknesses for correctly spacing various brand and model cassette cogs. Measure and match your spacers to choose the right width.

$16.99 - $18.99
Best suited for the acknowledged weight weenie and thin grip lovers. 50 grams, standard grip length - 5 1/8", installed DIA. 30 mm, weight plus or minus 5%, 1 set of bar plugs included.
- 50 Grams
- Standard Grip Length – 5 1/8"
- Installed Dia. 30mm
- Weight plus or minus 5%
- Made for 22mm bars (can fit applications down to 19mm)
- Bar Plugs included
- *Install Bar Plugs first for the protection of grips and ease of installation
Page 1 of 152
Next page