The Shadow Classic Helmet is constructed with a high-impact ABS hard shell with a light EPS core liner for even distribution of force upon impact. - ABS Hardshell construction with light EPS core liner - Includes two sets of padding for a custom fit - CE and CPSE certified - Shadow Crow Head rivets and Classic woven label - X-Small = 46 – 50cm - Small/Medium = 50 – 56cm - Large/X-Large = 56 – 61cm - XX-Large = 61 – 65cm
The FeatherWeight features In-Mold technology to make a custom shape and fit utilizing a thin outer shell that covers and protects high-density EPS foam. - High density EPS in-mold construction - Tested and certified for CPSC and EN 1078 standards for bicycle use - Two sets of padding included for custom fitting - Crow rivets and 10 flow-vents to keep cool - Small/Medium = 50 – 56cm - Large/X-Large = 58 – 61cm
The ultimate commuter helmet cover combrines a fully reflective fabric, with water and wind protection. - Sugoi's fully reflective and waterproof Zap fabric is designed for high visibility in low light - Two sizes to offer a wider range of fit possibilities
The Classic certified helmet delivers maximum protection and comfort. - Vents: 11 Open Vents - Interior: Heat-Sealed Premium Pads - ABS Hardshell construction with light EPS core liner - Multi-certified for CPSC, CE, ASTM and AS/NZS 2063:2008 - Small = 54 – 56cm - Medium = 56 – 58cm - Large = 58 – 60cm - X-Large = 60 – 62cm
The Old School Cert was modified from the original 1973 Full-Tec and features a retro shape that sits low on your head, offering great impact protection. - The more rounded shape practically molds to any shape head - High-Impact ABS shell - Premium heat-sealed EPS liner for a comfortable fit - 11 open vents keep you cool - Compression molded pads - CPSC 1203, EN 1078, AS/NZS 2063:2008 certified - Small = 54 – 56cm - Medium = 56 – 58cm - Large = 58 – 60cm - X-Large = 60 – 62cm
The Full Cut helmet features a retro design with compression-molded pads. - Classic ear protection styling - HDPE or ABS shell lined with EPS and outfitted with compression-molded pads - Two-stage premium liner - Stainless steel hardware - Soft tubular webbing - Multi-impact, and Multi-Certified (CPSC, CE, ASTM, AS/NZS 2063:2008) - Small = 54 – 56cm - Medium = 56 – 58cm - Large = 58 – 60cm - X-Large = 60 – 62cm
Compatible with Shiner and Shiner Back lights - Rubber pad with loop straps to quickly mount and remove light for recharging - 50mm bolt spacing to fit most rear racks
Offering finely tuned trail protection, this trail and enduro mountain bike helmet gives exceptional coverage and features POC's innovative, patent-pending technology to minimize neck injury. Built to ride, all day. Features: - SPIN technology (Shearing Pad INside)—our patent-pending silicone-pad-technology system - Fully wrapped unibody shell to enhance durability and structural integrity - 360° size-adjustment system for the most precise and secure fit - Breakaway visor - Lightweight and well-ventilated Breakaway visor - The novel breakaway visor will snap off the helmet in an impact, thereby minimizing the impact forces that are transmitted to the neck. - The lightweight, well-ventilated Axion SPIN has extended protection zones around the temples and the back of the head for extra coverage where it is most needed.
POC's Octal helmet is light, ventilated, safe, and FAST. It's unique shape uses a unibody construction that provides more coverage to the temples and the back of the head. It's EPS liner is strategically thicker in sensitive areas, and it's all covered with a durable outer polycarbonate shell. The Octal delivers massive front vents and uses Coolbest padding to reduce the temperature between the helmet and your head. The huge vents even make a great place to store your sunglasses. A scannable ICE tag is also included.
Nutcase sets the standard for fun when it comes to kid's helmets. The all-new Little Nutty raises the bar again, featuring industry safety leader MIPS in addition to being filled with protective Crumple Zone EPS foam. Now offered in two sizes, the Little Nutty ensures ultimate fit and comfort for kids ages 3 and up. With 15 new designs and 11 contoured air vents, we not only want kiddos to look cool, we want them to remain cool. - Durable injection-molded ABS shell with engineered Crumple Zone EPS protective foam featuring MIPS Safety Protection - New improved visor included - 11 contoured vents for ultimate cooling - Snap-and-go, No-Pinch Fidlock Magnetic closure - Heat-sealed, 3-piece pad set / GROW Flex Fit System cradles and ensures safety, individual fit and comfort and 360 degree reflectivity via logos and fit system - CPSC 16 CFR 1203 and ASTM F1492 Certified Sizing - Toddler (48cm – 52cm) - Youth (52cm – 56 cm)
The Nutcase Street Helmet collection combines the industry leading safety feature MIPS with original Nutcase inspiring designs. Featuring an improved retention system to provide a secure, comfortable fit and 2x the reflectivity for visibility on the road. Eleven air vents increase airflow to keep your brain cool and creative designs to keep you looking even cooler. - Equipped with MIPS (Multi-directional Impact Protection System) designed to reduce rotational forces that can result from certain impacts - High-performing injection-molded ABS shell and tuned EPS foam to keep you safe on the road - Improved ventilation to keep you cool - Premium Fidlock magnetic closure for one-handed snap-and-go buckle - 3-piece internal heat-sealed pads to provide next-to-brain comfort - Simple dial-adjustable fit system provides safety, individualized fit, and comfort - 2x reflectivity for increased visibility on the road - 11 vents with internal channels in EPS for ventilation - Visor Included - CPSC 16 CFR 1203 and ASTM F1492 certified for cycling, scooting, and skating Sizing - Small = 52 – 56cm - Medium = 56 – 60cm - Large = 60 – 64cm
The Nutcase VIO MIPS LED helmet was designed for both urban and adventure riders alike. Featuring safety-leading MIPS technology and 360° LED lighting (200 lumen front/65 lumen side & rear), lighting up the night has never been so much fun. The VIO delivers all this with a 3-hour run time. Features: - 3 oversized vents for maximum airflow - 360° reflectivity - Fidlock magnetic buckle - Xstatic anti-microbial pads - Adjustable spin dial for a premium fit - Removable visor Sizing - Small/Medium = 55 – 59cm - Large/X-Large = 59 – 62cm VIO brings ground-breaking light and panoramic visibility to the urban jungle and wanderlust gravel backroads with an industry-leading 360° LED light system. Featuring an innovative head-badge that doubles as a headlamp—which produces 200 LED lumens of headlight and a 65 LED lumen side and rear red and orange light band—the VIO can be seen from over 500 feet away, meeting most state guidelines as a bicycle light. Literally at its core, the Vio boasts an exclusive and patented Exo-skeleton technology, making the VIO the lightest 360° LED helmet in the world. Vio boasts a two-piece in-mold construction with Duo Density EPS foam. A denser outer layer of foam shields against initial impacts, and a softer inner layer cushions the brain after initial impact, providing the ultimate in protection.
- In-molded construction - TransTextura moisture-wicking, anti-odor inner padding - MIPS Protection - Optional visor
Inspired by gravity riders and presenting a modern mountain biking style, this off-road helmet is designed with generous ventilation and added protection Along with essential safety features like MIPS technology, we’ve added a lower rear coverage design to shield more of the back of your head. Direct Flow Cooling channels are designed to pull in air to keep you cool during slow, challenging climbs or flowy descents. With a one-handed dial adjustment and rear fit system you get perfect head-hugging comfort. - Contemporary, clean and compact helmet shape offers stylish looks at an accessible price point. - Numerous broad vents provide maximum air flow. - Dropped rear section for extended protection on the back of the head. - All-new 360 degree Cinch One MIPS fit system with intuitive one-handed dial adjustment for comfort and balance. - In-molded construction. - TransTextura moisture-wicking, anti-odor inner padding. - MIPS Protection. - Integrated magnetic mount for the Numen Alumbra TL and Recon TL.
Inspired by gravity riders and presenting a modern mountain biking style, this off-road helmet is designed with generous ventilation and added protection Along with essential safety features like MIPS technology, we’ve added a lower rear coverage design to shield more of the back of your head. Direct Flow Cooling channels are designed to pull in air to keep you cool during slow, challenging climbs or flowy descents. With a one-handed dial adjustment and rear fit system you get perfect head-hugging comfort. - Simple, clean and compact helmet shape - Optimized vent design for enhanced breathability - MIPS brain protection system and lower rear coverage - New 360° full surround fit-belt - Intuitive one-handed dial adjustment (Cinch ONE fit system) - Compatible with Alumbra taillight: Liv proprietary taillight docking station - In-molded construction for added strength - TransTextura moisture-wicking, anti-odor inner padding - Pony-tail friendly rear fit system space - Detachable visor - S / M (49-57cm), M / L (53-61 cm)
The Liv Rev Comp brings the same great benefits of the Liv Rev to all levels of riders. You’ll stay cool and dry with ventilation from the Direct Flow Cooling and moisture-wicking TransTextura PLUS as you grind uphill and hit the flats. Open up on high-speed descents with a perfectly snug fit for zero distractions, thanks to the CINCH Pro head-hugging fit system. Whether you attack during a group ride or hang back to take in the views, Liv Rev Comp has you covered with a stylish design and uncompromising comfort. Liv Rev Comp is available with the latest MIPS technology for maximum crash protection. - AirFlow 14-vent cooling system is enhanced by three large center vents pulling air through the helmet and over the rider’s head to keep them cool - In-mold Polycarbonate (PC) shell with lightweight EPS foam provides maximum protection without being uncomfortable - Lightweight, comfortable LiteForm webbing wraps around the head for a secure and comfortable fit. It’s also hydrophobic so it won’t absorb sweat or stretch out like other webbing - Locking cam buckles keep the LiteForm webbing anchored securely - TransTextura Plus anti-microbial padding helps fight bacteria growth by pulling sweat from a rider’s head and transferring it through the AirFlow vents. The natural property of the fabric inhibits microbes that cause odors - Cinch Pro fit system offers optimal coverage by cradling the occipital bone for full protection, support and comfort - Numen+ Link TL Magnetic mount compatible - MIPS Brain Protection System optimized design - Certifications: CPSC/CE - Small/Medium- 49-57cm; Medium/Large- 53-61cm
With authentic off-road style and a comfortable fit, this helmet deLivers it all for aspiring adventurers. Integrated features including a camera mount and compatibility with the Giant Numen Link taillight make it easy to customize your ride. - We've got you covered! 1 year crash replacement program. - Trail specific design. Purpose built for aggressive trail and enduro riding. Rail features a new shape with extended rear coverage. - A total of 18 vents with straight, non tapered walls, designed and positioned for off-road performance. The size and shape of the vents helps guide airflow through interior channels to maximize ventilation at low and high speeds for better cooling - Cinch Pro Fit system. - Integrated magnetic mount for the Numen+ Link and Recon TL - MIPS mimics the brain's own protection system by adding a low friction layer between the head and the helmet reducing rotational violence that causes strain to the brain at angled impacts
- Direct Flow Cooling guides airflow into ultra-deep internal channels optimizing ventilation at high and low speeds - Moto-style extended protection visor is infinitely adjustable and removable - Integrated goggle strap retainer helps goggles stay in position - Low and high speed impact-tuned construction with optimized EPS density, and super-tough polycarbonate shell - ESS brings together CINCH Pro, Optimal Position Y, and LiteForm webbing for the best straight-out-of-the-box fit and comfort - TransTextura PLUS X-odor anti-microbial pads - MIPS is a low friction layer between the head and the helmet that provides added protection with respect to angled impacts - Women's
- Built for pure competitive advantage where the smallest gain in aerodynamics is necessary - Offers super low aerodynamic drag over a variety of rider positions - Maximum ventilation with Direct Flow Cooling guiding airflow into ultra-deep internal channels - Elements Strap System (ESS) combines CINCH Pro dial fit system with no-adjustment-needed Optimal Position Y and LiteForm webbing creating secure fit with simple adjustment - Maximum head protection in both low and high speed falls
Now that we have MIPS protection, it’s hard to remember a time when this level of helmet technology didn’t exist. Extra brain protection is simply a no brainer, so along with MIPS we’ve added a lower rear coverage design to shield more of the back of the head. Infinita SX is safe, but it’s also styling with all the latest features like the infinitely adjustable and removable moto-style visor, an integrated goggle strap to keep your eyewear steady on descents, and GoPro mounts on the front and top. Whether you’re slowly cruising or quickly charging, the Direct Flow Cooling channels are specially designed to pull in air at both high and low speeds to cool your head. Combining CINCH One Pro with a full 360° belt allows you the snug sizing and height adjustment to create your perfect fit. Cozy, featherweight LiteForm webbing also adds head-hugging comfort that allows your head to move naturally while it is protected. - Direct Flow Cooling guides airflow into ultra-deep internal channels optimizing ventilation at high and low speeds - 20 large vents - In-mold all-in-one construction for impact-absorbing strength, ultimate durability and crash protection - Moto-style extended protection visor is infinitely adjustable and removable - Integrated goggle strap retainer helps goggles stay in position - Low and high speed impact-tuned construction with optimized EPS density and super-tough polycarbonate shell - CINCH One Pro for simple head-hugging comfort - LiteForm webbing for gram-reducing comfort and performance - TransTextura Plus antimicrobial padding prevents growth of odor-causing bacteria by wicking moisture away from the rider’s head - Integrated dual GoPro compatible camera mounting bridge on front and top of the helmet - MIPS low friction layer between the head and the helmet that provides added protection with respect to angled impacts - S 51-55CM; M 55-59CM; L 59-63CM - Certifications: CE/CPSC/AS
- 21-vent configuration for optimal airflow and top-of-the-head ventilation - LiteForm webbing for enhanced comfort and performance - Internal Structural Shell (ISS) for strength at a reduced weight - Giant CINCH+ fit system for simple and easy head-hugging comfort - Proprietary TransTextura PLUS anti-microbial fast-wicking pad technology - MIPS is a low friction layer between the head and the helmet that provides added protection with respect to angled impacts - Women's
Taking the ultimate helmet lighting system – the Vis 360 – to the next level, the Vis Pro features an ultra-powerful 600-lumen headlight optimized for commuting and bright enough for twisty singletrack! The featherweight system is waterproof for all-conditions reliability and has an integrated rear light/battery pack that balances the unit on a variety of helmets. An essential setup for those requiring maximum protective visibility with powerful illumination. Featuring: - 600 Lumen Output Certified to the FL-1 Standard - Daylight Visible Pulse Mode - Integrated Battery Pack With Red Rear Lighting - Innovative Amber Sidelights Provides Critical Side Visibility at Intersections - Ultra-lightweight Setup With Easy Clip On/Off Design - Waterproof to 1 meter For All-Conditions Reliability - Accurate Battery Charge & Status Indicator - Micro USB Rechargeable Included: - Helmet Mounts & Micro USB Charging Cable
Strap divider for thick Lazer helmet straps COMPATIBILITY - Blade+ MIPS - Blade+ - Tonic MIPS - Tonic - Coyote MIPS - Coyote - Chiru - Next+ - Cameleon MIPS - Compact DLX MIPS - Compact DLX - Compact - J1 - Gekko MIPS - Gekko - Lil'Gekko MIPS - Lil'Gekko - ATTACHMENT: strap - WEIGHT: 3g - MATERIAL: Nylon
Strap divider for thin Lazer helmet straps COMPATIBILITY - Bullet 2.0 - G1 MIPS - G1 - Z1 MIPS - Z1 - Century MIPS - Century - Victor - Wasp Air Tri - Impala - ATTACHMENT: strap - WEIGHT: 3g - MATERIAL: Nylon
Replacement Pads for Lazer's BOB Helmet
Screws for Impala visor. - COMPATIBILITY: Impala MIPS, Impala - WEIGHT: 1g - MATERIAL: Aluminum
Freshen up the interior of your helmet with a new pad set! - Replacement pads for Jackal helmets
Freshen up the interior of your helmet with a new pad set! - Replacement pads for Sphere helmets - Attachment: Velcro - Material: Foam
Freshen up the interior of your helmet with a new pad set! Padset details listed below. Replacement padset for Lazer Bullet and Bullet MIPS helmets. Set includes six pads - Two front pads, two top center pads, two top side pads. - COMPATIBILITY: Bullet, Bullet 2.0 - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam
Camera mount for Jackal and Impala helmets. - COMPATIBILITY: Jackal MIPS, Jackal, Impala MIPS, Impala - ATTACHMENT: Velcro - WEIGHT: 13g - MATERIAL: Nylon
Page 1 of 5 Next page