Parts & Accessories

Easy-to-install foot for Thule Edge roof racks, for vehicles with flush railings. - Easy-to-install roof rack feet - For vehicles with flush railings - For Thule Edge roof rack systems Features: - Load carrier feet for Thule Edge roof rack system - Foot installs easily onto vehicles with flush railings - Ergonomic torque limiter key indicates when the rack is safely and properly secured to your vehicle - Secures to vehicle with Thule One-Key locks (sold separately) - Check the Thule Buyer's Guide to find out which roof rack fits your car - Maximum load: 165 lb. Please also check the maximum roof load capacity of your vehicle.

You bought a Thule Podium Rack and now you need to match the feet to the roof of your car; don't sweat it. The Thule Podium Fit Kit arms you with the four pebax-coated, car-specific brackets and custom-fitted, rubberized footpads you need to mate the feet

This 53" long ramp, for use with Thule EasyFold XT, makes it easier to load and unload bikes, especially for taller SUV's and vans. Features - Quickly load and unload bikes from taller vehicles by adding this longer ramp (53") to the Thule EasyFold XT - Easily attach the ramp to the Thule EasyFold XT wheel tray using the tongue and groove connection

Easy-to-install foot for Thule Edge roof racks, for vehicles with raised railings. - Easy-to-install roof rack feet - For vehicles with raised railings - For Thule Edge roof rack systems - For raised railings Features: - Load carrier feet for Thule Edge roof rack system - Foot installs easily onto vehicles with raised railings - Ergonomic torque limiter key indicates when the rack is safely and properly secured to your vehicle - Rubber lining protects the surface of the raised railings - Secures to vehicle with Thule One-Key locks (sold separately) - Check the Thule Buyer's Guide to find out which roof rack fits your car

Wind fairing that redirects airflow over roof rack for a quieter ride. - No tools required for assembly or installation. - New system-specific clamps (included) provide the roof rack fairing a clean and secure mounting for our - AeroBlade, AeroBlade Edge, and SquareBar systems. - AeroBlade and AeroBlade Edge clamps give full access to the upper T-track for quick accessory mounting and removal. Technical specifications - Length: 44-inch - Fits Thule AeroBlade - Fits Thule SquareBar

Two 13-foot or 10-foot locking straps with One Key locking cylinders. - Two locking straps - Steel cables inside a theft-resistant nylon sleeve provide a dual-layer locking system - Lightweight and corrosion resistant aluminum buckle - Lock housing rubber-coated to prevent vehicle and equipment scratches - Two One-Key lock cylinders included

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks FORD - F-150 4-dr Super Crew Cab with Normal Roof 2015 - 2019 - F-150 4-dr Super Cab with Normal Roof 2015 - 2019 - F-150 Raptor 4-dr Super Cab with Normal Roof 2017 - 2019 - F-150 Raptor 4-dr Super Crew Cab with Normal Roof 2017 - 2019

The TC2 Thule Wheel Tray End Caps are compatible with the following Thule Wheel Trays: Thule 594 Sidearm, 594XT Sidearm, Thule 599XTR Big Mouth, Thule 589 Velo Vise, Thule 590 V2, Thule 590R V2 Recumbent, Thule 591 Long Tray Classic, Thule 517 Peloton, and the Thule 518 Echelon. - Sold as a set of two - Replacement parts for broken or lost end caps

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Thule's Load Bar End Caps are replacement end caps for rectangular load bars.

Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.

Easy-to-install foot for Thule Edge roof racks, for vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Easy-to-install roof rack feet - For Thule Edge roof rack systems - For vehicles without attachment points Features: - Load carrier feet for Thule Edge roof rack system - Foot installs easily onto vehicles without pre-existing roof rack attachment points - Ergonomic torque limiter key indicates when the rack is safely and properly secured to your vehicle - Quick assembly and install with click-in mounting brackets. No additional tools required - Securely holds the rack to the vehicle thanks to patented clamping technology - Secures to vehicle with Thule One-Key locks (sold separately) - Check the Thule Buyer's Guide to find out which roof rack fits your car - Maximum load: 165 lb. Please also check the maximum roof load capacity of your vehicle

You bought a Thule Podium Rack and now you need to match the feet to the roof of your car; don't sweat it. The Thule Podium Fit Kit arms you with the four pebax-coated, car-specific brackets and custom-fitted, rubberized footpads you need to mate the feet

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Install or replace all lock cylinders on your Thule products and use the same key for all. - Replace the locks in your Thule product in a few easy steps - Including grip-friendly Thule Comfort key - Set of 6 locks, all using the same key

Install or replace all lock cylinders on your Thule products and use the same key for all. - Replace the locks in your Thule product in a few easy steps - Including grip-friendly Thule Comfort key - Set of 4 locks, all using the same key

The Thule Xadapt 9 Adapter Kit makes it possible to connect Thule carriers to Thule Rapid Aero and Thule Professional load bars. Please contact us with any questions regarding compatibility.

A set of extra-long replacement wheel straps to enable transport of very large-tire fat bikes. - Fits Thule EasyFold XT bike racks

The Thule Xadapt 8 Adapter Kit makes it possible to connect Thule carriers to Thule Professional load bars. Please contact us with any questions regarding compatibility.

Thule's Frame Adapter is an ingenious solution for carrying bicycles without standard top tubes (for example, some dual-suspension, BMX and step-through frames), on rear-mounted car racks. The Frame Adapter attaches quickly and easily and lets the rack carry your bike securely.

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Thule's Snug-Tite Receiver Lock secures their T2, Doubletrack, Roadway, and Parkway receiver-type racks (also called "hitch racks"). Just insert the Snug-Tite in place of your receiver pin and the rack is locked in place.

An adapter for Thule ProRide to enable transport of fatbikes. - A set of replacement wheel holders for the Thule ProRide bike carrier - Fits wheel dimensions 3 – 5 inches to enable transport of fatbikes

Easy-to-install foot for Thule Evo roof racks, for vehicles with flush railings. Features - Load carrier feet for Thule Evo roof rack system - Foot installs easily onto vehicles with flush railings - Ergonomic torque limiter key indicates when the rack is safely and properly secured to your vehicle - Secures to vehicle with Thule One-Key locks (sold separately) - Check the Thule Buyer's Guide to find out which roof rack fits your car Technical specifications - Maximum load: 165-pound. Please also check the maximum roof load capacity of your vehicle - One Key System compatible Fits: - Thule WingBar Evo - Thule AeroBlade - Thule SquareBar - Thule ProBar

Replacement ratcheting cradle straps (for 2 bikes). - Replaces ratchet style straps on Thule Apex XT, Thule Helium Pro, Thule Camber, and Thule Range - Contains six ratchet style straps (four cradle straps and two anti-sway)

Thule's Cable Lock gives added security to your gear. This 6-foot coiled cable lock uses a Thule One-Key Cylinder (included).

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

With Thule's Fat Tire Kit for T2 Racks you can finally throw your fat bike on your Thule rack (sold separately) and head for the hills. Oversize wheel trays accommodate tires up to 5-inches wide and the tray has been shaped to work perfectly with even the widest treads. An extra-long wheel strap is included to make fastening your rear wheel a breeze. This kit attaches easily to your Thule T2 hitch rack (sold separately) and includes the mounts needed for a single bike.

Getting your gear onto your rack isn't complete until you've secured it. This pair of super strong box-stitched 16" straps include soft, rubber-coated buckles to protect your boats and gear from scratches.

The LongArm Pad provides some extra protection when hauling gear on Yakima's LongArm truck bed extender. The pad combines durability and protection with a soft foam core and a ballistic nylon exterior that holds up over time. Hook and loop closures are designed to hug the LongArm’s crossbar tight and a center cutout allows side or centered placement. Sold as a single pad. PRODUCT DETAILS - Foam padding protects boats and other cargo from damage - Durable, ballistic nylon construction - Look and loop closures and 28” length perfectly fit around the LongArm crossbar - Center cutout allows side or centered placement on crossbar - Sold as a single pad TECHNICAL SPECS - Weight: 0.50 lbs - Dimensions: L 28.00in x W 3.00in x H 3.00in

Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.

Tailored to precisely fit flush-mount factory side rails, RidgeClips secure the RidgeLine Towers to your aerodynamic rooftop. Created in different designs to fit specific vehicles, they have a brilliant clip design that’s super strong, easy to install, and holds on tight. - Ingenious clips designed to attach RidgeLine Towers to flush-mount factory side rails - Range of shapes lets you find the precise, secure fit specific to your vehicle - Unique inner and outer clip design delivers exceptional hold - Powder-coated stainless steel provides maximum strength and durability - Sold in sets of four – just one kit sets up your system

Rear wheel strap for Boa bike mount. Includes one strap.

Custom Landing Pads to install directly to the factory fixed mounting points of the 2005+ Toyota Tacoma. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. Product Details - Includes a snap-on cover when not in use - Each pad sold in a set of two - Includes 4 metal "C" anchor plates 1-3/16" x 13/16" and 4 metal "D" anchor plates 1-1/2" x 13/16" (Contact Yakima Customer Service for additional size anchor plates) Product Specs - Weight: 0.86 lbs. - Limited Lifetime Warranty

Saris' Locking Hitch Tite adds both stability and security to your hitch rack. It tightens up the interface between your rack and hitch to combat swaying and it locks your rack to your vehicle. It fits 1-1/4 and 2-inch threaded hitch-tites and is compatible with the 200/500 Series T-Rax, all Thelma racks, standard-model Cycle-Ons, and all the T-Bones racks (each sold separately).

Like the first version, the Pivot v2 will make sure your rack never gets in the way. Smoothly swing up to a 4-bike rack to the side for clear access to tailgates, rear doors, and hatchbacks. And when it’s time to load up, the locking mechanism makes sure your rack only moves when you want it to. - Clearance for tailgates or rear doors - Proprietary FLATLOCK cam system - Locking hitch pin - Lifetime Warranty - 2” Hitch Only - Quick-release 90 or 120 degree swing away - Driver-Side or Passenger-Side Swing Options - Compatible with fully loaded 4-bike NV 2.0 - Load up to a maximum of 250lbs

Saris' Locking Cable 8' keeps your bike and rack where you want them: attached to your vehicle. This braided, stainless-steel cable is 8-feet long for plenty of reach. Plus, the vinyl coating protects your vehicle's and bike's finish.

Yakima's Trunk-Mount Security Strap is a steel-reinforced strap that lets you secure your trunk rack to your vehicle.

An adapter set for Thule FastRide to enable transport of bikes with 9-15mm thru-axles. - Enables transportation of bikes with 9-15mm thru-axles

SafetyMate ensures you are street-legal when using the StageTwo and StageTwo +2. Keep the clean lines and style of the StageTwo family going with the clean LED Lightbar and internal electrical routing. Safety never looked so good. PRODUCT DETAILS - Keeps your lights and license plate visible while on the road? - Attachment points allow SafetyMate to be visible while StageTwo is in use as well as folded up - Powerful LED taillights have full brake, turn signal, and lighting functionality - Flexible license plate attachment helps protect your plate from steep driveways - Fits all US and Canada plates - Wiring is internally routed through StageTwo and StageTwo +2 for a clean look - Uses 4-Flat electrical connection and includes all necessary wiring to connect to your vehicle's wiring harness - Compatible with StageTwo and StageTwo +2

Thru-axle adapter for the Kuat TRIO rack.

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars CHEVROLET - Malibu 4-dr Sedan with Normal Roof 2016 - 2019

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars FIAT - 500L 5-dr Hatchback with Normal Roof 2013 - 2019

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points or factory-installed racks. Features - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Check the Thule Buyer's Guide to find out which fit kit fits your car Fits Cars CHEVROLET - Spark 5-dr Hatchback with Normal Roof 2013 - 2015 - Spark 5-dr Hatchback with Normal Roof 2016 - 2020

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars HYUNDAI - Accent 4-dr Sedan with Normal Roof 2018 - 2019

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars FORD - Focus RS 5-dr Hatchback with Normal Roof 2016 - 2018

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars NISSAN - Juke 5-dr SUV with Normal Roof 2011 - 2018

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars BMW - X4 5-dr SUV with Normal Roof 2015 - 2018

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Easy-to-install foot for Thule Evo roof racks, for vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Load carrier feet for Thule Evo roof rack system - Foot installs easily onto vehicles without pre-existing roof rack attachment points - Ergonomic torque limiter key indicates when the rack is safely and properly secured to your vehicle - Quick assembly and install with click-in mounting brackets. No additional tools required - Securely holds the rack to the vehicle thanks to patented clamping technology - Secures to vehicle with Thule One-Key locks (sold separately) - Check the Thule Buyer's Guide to find out which roof rack fits your car

Provides a clean and sleek look for your Saris Bones rack, these end caps allow excess strap length to be tucked neatly inside rack - Provides a clean and sleek look for your Saris Bones rack - Upgrade your current Bones or Bones EX rack (pre-2022) - Compatible with: Bones or Bones EX racks - Not compatible to use with any Bones Hitch racks or SUPERBones

Fat Tire holder for T2 PRO X

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars FORD - Focus 4-dr Sedan with Normal Roof 2012 - 2018

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks NISSAN - Versa Note 5-dr Hatchback with Normal Roof 2014 - 2019

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars VOLKSWAGEN - Arteon 4-dr Sedan with Normal Roof 2019 - 2019

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars MAZDA - CX-3 5-dr SUV with Normal Roof 2016 - 2019