Yakima's 1A Raingutter Towers are the rock-solid foundation for your Yakima roof rack (for vehicles without factory roof racks). The 1A Raingutter Towers adjust to fit your vehicle's roof line and they have die-cast components that securely hold the crossbars (sold separately). Plus, they hold fast and safely to your roof with rubber pads that protect your vehicle's finish.
Yakima's 9-foot SKS Cable provides a visible theft deterrent for bikes and gear. It locks your load to the crossbar so you can park and leave your vehicle without worrying about your bikes.
Hitch rack swing adapter. Now you can rack up the bikes and still access your tailgate. The BackSwing hitch adapter turns your hitch product into an easy-to-use swing-away rack that locks up tight while you're on the road. It works seamlessly with most 2" bike racks, like the HoldUp EVO - as well as almost any other rack using a 2" receiver - to let you swing your fully loaded rack out of the way so you can easily get to your coolers, gear, and Fido. Product Details: - Hitch extension converts most 2" hitch products to a swing-away rack - Provides easy tailgate access - even with a rack fully loaded with bikes - Easily swings open 90 degrees and locks in place with the simple to use release lever - Safety latch secures the rack closed while you're on the road - Secures to any 2" hitch receiver using a threaded pin - Included SKS (Same Key System) lock keeps the rack secure - 250 lb maximum load capacity (rack plus gear) Product Specs: - Weight: 35.46 lbs - Dimensions: L 20.00" x W 30.00" x H 8.00" Installation Details: - Some Assembly Required - 10 Minute Install - 2" Hitch Receiver Required Compatible with the following: - Dr.Tray- 2" only (without the EZ+1 attached) - SingleSpeed - HangOver 4 - 4 Bike only - TwoTimer - HoldUp EVO - HoldUp EVO +2 - HoldUp - HoldUp +2 - FourTimer - LongHaul (Vans and Passenger Vehicles Only) - RoadTrip (Vans and Passenger Vehicles Only)
Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.
Sleek and strong, the BedRock HD’s low profile delivers a 300-lb. on-road capacity and Yakima's exclusive new Off-Road Rating for up to 180 lbs. all without the need to drill into the truck bed. Pair it with the HD Bar length that best fits the bed to carry bikes, skis, cargo boxes or the SkyRise Rooftop Tent all while preserving valuable cooler-carrying capacity underneath (HD Bar sold separately). This powerhouse truck rack provides strength and security, easily-accessible tie-down points, and T-slot attachment capability that makes adding gear easy. Product Details: - Easy to reach low profile height position makes it easy to rack out and reach gear - Comes with four towers - Requires Yakima HD Bar crossbar in 60"/68"/78" lengths (Sold Separately) - Simple, tool-free attachment makes installation, removal and crossbar spread adjustments a breeze - Best-in-class, maximum on-road rating of 300 lbs. - Maximum off-road rating of 180 lbs. - Built to last, with engineered aluminum construction and durable powder-coat finish - Integrated tie-down points on end-caps of HD Bar make securing any load quick and simple - T-slot attachments make adding gear mounts and accessories fast and easy - Designed and tested for all common truck beds - Integrated SKS (Same Key System) locks the rack system to the truck bed - Suggested mounts and accessories: Bike Mounts, Cargo Baskets, SkyRise Tent, Wear Strips, Eye Bolts, BigCatch Fishing Kayak Saddles Product Specs: - Weight: 8.01 lbs - Dimensions: L 5.50in x W 4.25in x H 7.00in - Some assembly required, 30 minute install
Make carrying your boat highway safe with these bow/stern tie downs. Forget about tying knots, these tie downs feature handy ratchet pulleys that are easy to use and are corrosion resistant. They're also great for securing non-nautical loads like ladders or lumber. - Secures the bow and stern of any boat - Best in class corrosion resistance - Clear plastic tubes protect your vehicle from damage
The control key is "uncut" and is used only for the removal and installation of an unlocked SKS core. Product Specs: - Weight: 0.02 lbs. - Limited Lifetime Warranty
Combining modern aerodynamics with old-school muscle, the new CoreBar is the first aero bar built with roll-formed steel’s strength, utility and durability. The JetFlow design is wind-tunnel tested to reduce drag for less wind noise and better fuel economy, and the galvanized steel delivers proven load-bearing performance. - Wind tunnel tested JetFlow teardrop shape is strong, quiet and exceptionally aerodynamic - Roll-formed galvanized steel holds the load - Sleek aerodynamic design looks awesome on your car’s roof - Vinyl wrapped for durability and corrosion resistance - Includes CoreBar SL Adapter to integrate with all StreamLine System Towers - Available in 4 sizes: SM (50”),MD (60”), LG (70”) and XL (80”)
$45.00 - $55.00
Our CrossBar pads combine security and protection with a soft foam core and an anti-slip surface that holds onto your gear. Sectioned hook-and-loop closures are designed to secure around roof rack attachment points and accessories to get a more customized fit for your vehicle. - Foam padding protects boards and boats from damage - Anti-slip material helps keep your gear in place - Sectioned hook-and-loop attachments fit easily around roof rack towers and accessories - Fits most SUPs and fishing kayaks - Fits our CoreBar and JetStream crossbars, factory crossbars, and most other aerodynamic crossbars
Yakima's CrossBars are a necessary component of your rack system. They attach to your towers and enable you to affix bike trays, ski carriers, rooftop boxes, etc. Strong and durable, they're made of vinyl coated steel and stand up to harsh weather.
Whether you're tinkering on your gear, prepping a meal for your crew, or mixing drinks for a night of fun, the EXO BackDeck is the perfect solution, turning your EXO system from gear hauler to working surface to bar top in seconds. When you're done, simply stow it and get back on the road. - Connects to the EXO SwingBase or EXO TopShelf in seconds using the EXO cleat system - 50" x 17" UV protected bamboo work surface - Tool-free, locking SpeedKnobs attach and lock EXO BackDeck to EXO SwingBase or EXO TopShelf - Included bag protects the tabletop when not in use and makes for easy transport - Sized to store inside the EXO GearLocker or EXO GearWarrior - 80lb weight capacity - 1 Year Warranty - Not intended to be used as a cutting surface - Requires EXO SwingBase and/or EXO TopShelf Product Specs: - Weight: 10.80 lbs. - Dimensions: L 17.00 in x W 50.50 in x H 0.75 in - Limited One Year Warranty
The two-bike EXO DoubleUp attaches directly to the EXO SwingBase, or to the second tier EXO TopShelf, allowing room for an EXO GearLocker or EXO GearWarrior below. Either way, it's super-easy access that accommodates anything you're riding—fat tires to road bikes and everything in between. - Connects to the EXO SwingBase or EXO TopShelf in seconds using the EXO cleat system - StrongArm hook secures bike at wheels, protecting painted surfaces and carbon frames - Fits most bikes, including fat-tire, mountain, road, hybrid, women's-specific, BMX, kids' bikes - Accommodates disc brakes, through axles, boost hubs, and full suspension bikes - Fits 20" to 29" wheel sizes and tires up to 4.8" wide - Carries 2 bikes up to 50 lbs. each when mounted on EXO SwingBase - Carries 2 bikes up to 40 lbs. each when mounted on EXO TopShelf - Tool-free, locking SpeedKnobs attach and lock EXO DoubleUp to EXO SwingBase or TopShelf - Use SKS Lock cores included with EXO SwingBase or EXO TopShelf for added bike security - Limited Lifetime Warranty - Requires EXO SwingBase and/or EXO TopShelf Product Specs: - Weight: 37.15 lbs. - Dimensions: L 26.60 in x W 72.00 in x H 7.00 in - Limited Lifetime Warranty
Make the most of your EXO GearLocker with the EXO GearTotes, collapsible, dividable totes that make it easy to stay organized from house to vehicle to destination and back again. A durable ripstop nylon build, and 50-pound carrying capacity make these perfect for everything from groceries to gear. - Heavy-duty totes carry up to 50 lbs. of gear each - Perfectly sized for the EXO GearLocker - Totes fold flat for easy storage when not in use - Includes a removable divider with hook-and-loop attachment - Structural webbing handles make it easy to haul loaded totes to your vehicle or campsite - Made of 600D fabric with durable PU Coating - Each tote measures 13" x 17.5" x 9" - Sold as a 2-Pack - 1 Year Warranty Product Specs: - Weight: 4.09 lbs. - Dimensions: L 18.00 in x W 13.50 in x H 9.50 in - Limited One Year Warranty
Hardcore adventurers like keeping things safe on the road. EXO LitKit ensures you are street-legal when using the Yakima EXO System. Simply attach to the EXO SwingBase arms to keep your license plate and taillights visible, no matter your configuration. - Keeps your lights and license plate visible while on the road - Uses 4-Flat electrical connection and includes all necessary wiring to connect to your vehicle's wiring harness - Tool-less install onto the EXO SwingBase arms - Attachment points allow EXO LitKit to rotate down and out of the way to easily switch between EXO Accessories - Powerful LED taillights have full brake, turn signal, and lighting functionality - Flexible license plate attachment helps protect your plate from steep driveways - Fits all US and Canada plates - 2 Year Warranty - Not intended to remain installed when Swing plate arms are closed - For EXO SwingBase only Product Specs: - Weight: 5.00 lbs. - Dimensions: L 24.50 in x W 50.00 in x H 10.00 in - Limited Two Year Warranty
Getting pressurized water to your destination just got even easier. The EXO RoadShower Kit lets you attach the RoadShower 4G and 7G to your EXO system giving you more mounting options for your RoadShower. Product Details - Connects RoadShower 4G and 7G to the EXO SwingBase or EXO TopShelf in seconds using the EXO cleat system - Tool-free, locking SpeedKnobs attach and lock RoadShower 4G and 7G to EXO SwingBase or EXO TopShelf - Heavy-duty steel construction with durable, powder-coated finish - Includes all mounting hardware (EXO System and RoadShower are sold separately) - Not compatible with RoadShower 10G Product Specs - Weight: 2.46 lbs. - Dimensions: L 14.00 in x W 3.00 in x H 4.00 in
Getting your skis and boards to the slopes has never been easier with the new EXO SnowBank. Pair it with an EXO GearLocker and you have customizable storage for everything you need. Carry up to five pairs of skis or four snowboards on the back of your vehicle—enough for your entire crew. - Connects to the EXO SwingBase or EXO TopShelf in seconds using the EXO cleat system - Carries 5 pairs of skis or 4 snowboards - DoubleJoint hinge expands for easy use with thick skis and boards - Large button makes it easy to open with gloves or mittens on - Tool-free, locking SpeedKnobs attach and lock EXO SnowBank to EXO SwingBase or EXO TopShelf - Use SKS Locks included with EXO SwingBase or EXO TopShelf to lock skis and snowboards - Fits skis up to 185cm long on most standard width vehicles - Limited Lifetime Warranty - Requires EXO SwingBase and/or EXO TopShelf Product Specs: - Weight: 13.25 lbs. - Dimensions: L 21.50 in x W 32.00 in x H 4.50 in - Limited Lifetime Warranty
The EXO SwingBase takes your standard hitch and turns it into the ultimate foundation for hauling and organizing every piece of gear in your kit. It's the base to which all other EXO components attach. Simply leave it on your vehicle and change EXO components as your adventures adapt. - Swings away from the car with gear loaded to provide easy access to rear of the vehicle - Accessories install in seconds using the tool-Free EXO Cleat system and locking SpeedKnobs - Accessory arms fold in when not in use - Fits 2" hitch receivers only - Included HitchLock locks EXO SwingBase to vehicle - Includes 2 extra SKS locks cores for use with EXO accessories - Built-in bottle opener—cheers! - Limited Lifetime Warranty Product Specs: - Weight: 68.50 lbs. - Dimensions: L 34.00 in x W 49.00 in x H 9.50 in - Limited Lifetime Warranty
Double your hitch capacity with a second tier of super-accessible storage with the EXO TopShelf. Whether you're cycling and camping, skiing and hiking or simply needing to double your load, the EXO TopShelf can mix-and-match EXO accessories to make any adventure easier. - Attaches to EXO SwingBase to create a second level on your EXO Hitch system - Rotates 180 Degrees relative to EXO SwingBase for easy access to gear on lower level or to set-up base camp mode - Accessories install in seconds using the tool-Free EXO Cleat system with locking SpeedKnobs - Included HitchLock locks EXO TopShelf to EXO SwingBase - Includes 2 extra SKS locks cores for use with EXO accessories - Includes a jack stand for base camp mode set-up - Quick and easy install and removal - Limited Lifetime Warranty - Requires EXO SwingBase Product Specs: - Weight: 33.50 lbs. - Dimensions: L 31.00 in x W 25.00 in x H 26.60 in - Limited Lifetime Warranty
- Fits all Yakima crossbars except 86-inch - Sold in sets of 4
The FatCat EVO is our sleekest, quietest, and sweetest ski & snowboard mount. It is wide enough to carry six pairs of powder skis—up to 136mm at the tip—or four snowboards. FatCat EVO mounts tool-free on virtually any roof rack. The OverHang clamp attachment point makes it easier to reach your skis or boards. SKS locks are built in for added security, and the mirror black finish looks awesome on your roof. For T-Slot crossbars, add the SmarT-Slot Kit 2 for a super-sleek setup (sold separately). - Easily carries six pair of skis—up to 136 mm wide at the tip—or four snowboards - Aerodynamic design delivers a quiet ride and streamlined good looks - Universal mounting system works with round, square, factory, and most aerodynamic roof racks - Integrated SkiLift provides clearance for tall bindings - DoubleJoint hinge expands for easy use with thick skis and boards - For easier access to skis and snowboards, the OverHang clamp-mounting position shifts the mount further out on your vehicle's roof rack - Large button makes it easy to open with gloves or mittens on - Sleek mirror-black finish looks great on your roof - Integrated SKS (Same Key System) locks included - Compatible with T-slot crossbars—just add our SmarT-Slot Kit 2 (sold separately) Product Specs: - Weight: 12.75 lbs. - Dimensions: L 40.50 in x W 3.75 in x H 5.25 in - Minimum Crossbar Spread 12.00in - Maximum Crossbar Spread 36.00in - Limited Lifetime Warranty
This fork adapter allows you to put your thru-axle fork on any 9mm fork-mounted bike rack. - Axle not included. Works with your bike's thru-axle - Fits all fork bike mounts including, Yakima, Thule, Rocky Mounts, etc. - Built-in safety tabs - Durable black powder-coat finish Product Specs: - Weight: 0.32 – 0.38 lbs. - Minimum Crossbar Spread 16in - Maximum Crossbar Spread 42in - Limited Lifetime Warranty
NEW! Blue groomers and fresh powder, the FreshTrack 6 is the perfect mount for loading the crew and finding first tracks. Wide enough for four boards or six pairs of skis, simple to mount on virtually any roof rack, no tools needed, and super easy to use, it's great for quick getaways and dawn patrol starts. One-button access allows gloves-on operation, and the built-in SKS locks secure your gear. Product Details - Easily carries six pairs of skis up to 120mm wide at the tip - or four snowboards - Tool-free clamp design makes install and removal a breeze - Universal mounting system works with round, square, factory, and most aerodynamic roof racks - Includes SkiLift attachment to provide clearance for tall bindings - Integrated SKS (Same Key System) locks included for added security Product Specs - Weight: 9.90 lbs - Dimensions: L 35.00" x W 5.75" x H 7.25" Installation Details - Some Assembly Required - Tool-Free Install - 25 Minute Install
Friends will double-take when they see our most versatile, aerodynamic bike mount on your car. It carries your complete bike—no wheel removal needed. The universal mounting system fits nearly any crossbars you can think of. - Fits Yakima round, square, factory or aerodynamic crossbars - Zero contact with frame; carbon fiber and custom paint jobs are protected - Accommodates disc brakes, thru axles, and full suspension bikes - Holds bike upright while you secure the bike to the mount - Leave your front wheel on for easy loading (some fenders may need to be removed to transport bike) - No tools or assembly required - Fits 20" to 27.5" wheels with tire widths up to 3" and 29" wheels with tires widths up to 2.7" - SKS Locks sold separately - 1 bike, up to 40 lbs at min of 18" crossbar spread; or up to 30 lbs at min of 16" crossbar spread - Accommodates bike wheelbases up to 48" Product Specs: - Weight: 13.00 lbs. - Dimensions: L 56.00 in x W 7.00 in x H 7.50 in - Minimum Crossbar Spread 16.00in - Maximum Crossbar Spread 42.00in - Limited Lifetime Warranty
A fresher take on the classic strap rack, the Yakima FullBack 2 securely holds your bike, is simple to use, stores easily, installs easily, and is easy on the wallet. The construction is rugged, the modern design is as cool as your ride, a locking package deters bike theft, and there’s a built-in bottle opener. Cheers. - New SuperCush ZipStrip cradles secure the bikes and make loading and unloading a breeze - ZipStrips secure bikes to the rack and are fully removable - Modern design delivers an improved fit and looks awesome - Bomber external frame holds tough, cushy padding protects your paint - Full SKS locking package secures rack to vehicle, bikes to rack to help prevent theft - Simple installation with an interlocking HUB that aligns key adjustment points - Four-strap attachment is intuitive and easy - Compact for easy storage - Premium high-gloss finish - Yakima signature bottle opener lets you enjoy a post-ride cold one - Easy number dial makes installation simple - Number of Bikes 2 TECHNICAL SPECS - Weight: 22.00 lbs - Dimensions: L 30.00” x W 25.00” x H 22.00”
A fresher take on the classic strap rack, the Yakima FullBack 3 securely holds your bike, is simple to use, stores easily, installs easily, and is easy on the wallet. The construction is rugged, the modern design is as cool as your ride, a locking package deters bike theft, and there’s a built-in bottle opener. Cheers. - New SuperCush ZipStrip cradles secure the bikes and make loading and unloading a breeze - ZipStrips secure bikes to the rack and are fully removable - Modern design delivers an improved fit and looks awesome - Bomber external frame holds tough, cushy padding protects your paint - Full SKS locking package secures rack to vehicle, bikes to rack to help prevent theft - Simple installation with an interlocking HUB that aligns key adjustment points - Four-strap attachment is intuitive and easy - Compact for easy storage - Premium high-gloss finish - Yakima signature bottle opener lets you enjoy a post-ride cold one - Easy number dial makes installation simple - Number of Bikes 3 TECHNICAL SPECS - Weight: 23.00 lbs - Dimensions: L 30.00” x W 25.00” x H 22.00”
Now the family bikes can ride in style. The FullSwing has all the bells and whistles, from new ZipStrips to fully padded arms. It also swings away with one touch, for easy access to your car whenever you need. Holds up to four bikes. - Swings away from car with bikes loaded to provide easy access to rear of vehicle - Quick and easy assembly - Tool-free installation with locking SpeedKnob - AutoPin automatically positions and secures rack to the hitch and receiver - Zero-hassle ZipStrips quickly secure bike to rack - Fully padded arms for the ultimate in bike protection - Arms fold down when not in use - SKS Locks included; locks racks and bikes - Carries up to 4 bikes - 4 bikes. Total weight, 150 lbs. Maximum bike weight 40 lbs each. - Available: TubeTop (sold separately) is required for non-conventional, step-through, BMX, and kid's bikes as well as some full suspension bikes. Product Specs: - Weight: 56.00 lbs. - Dimensions: L 43.50 in x W 26.00 in x H 17.50 in - Limited Lifetime Warranty
The GateKeeper tailgate pad is a perfect companion for pick-up bed bike transport. The durable nylon exterior protects your bike from your truck's tailgate while the soft felt backing protects your truck's paint. Integrated SitTight bike cradles and G-hook buckles add extra stability and protection for your bikes and the HindSight tuck-away cover opens up the view for your back-up camera, leaving you with a worry free shuttle to the top. - G-Hook tension lock system is easy on carbon bike frames and painted surfaces - Medium: Transports up to 5 bikes; Large: Transports up to 6 bikes - Rugged, vinyl coated nylon outer material resists abrasion and weather damage - Extra soft felt backing protects your trucks paint job - Add your own bike lock to the built-in cable lock loop to secure GateKeeper and your bikes to your truck - Reinforced webbing ends for easy installation under the tailgate - Integrated strap management system keeps the pad tight and secure on the way to the trailhead - HindSight tuck-away cover opens up the view for your back-up camera - Medium: Fits mid-size and some older full-size trucks with tailgates from 53-61" wide; Large: Fits modern, full-size trucks with tailgates 62" or wider - Printed graphics and silver reflective Yakima logo PRODUCT SPECS - Size Medium: Weight: 6.43 lbs; Dimensions: L 53.00 in x W 5.00 in x H 17.00 in - Size Large: Weight: 8.15 lbs; Dimensions: L 62.00 in x W 7.00 in x H 20.00 in
The GateKeeper tailgate pad is a perfect companion for pick-up bed bike transport. The durable nylon exterior protects your bike from your truck’s tailgate while the soft felt backing keeps your truck’s paint protected. Integrated SitTight bike cradles add extra stability and protection for your bikes and the HindSight tuck-away cover opens up the view for your back-up camera, leaving you with a worry free shuttle to the top. - Tailgate pad for your truck that securely carries your bikes to the trailhead - NEW Cushioned SitTight cradles protect bikes from shifting and sliding - NEW HindSight cover tucks out of the way so your back-up camera can do its job - NEW Velcro cradle closure system is easy on carbon bike frames and painted surfaces - Rugged nylon outer material resists abrasion and weather damage - Extra soft felt backing protects your truck’s paint job - Integrated strap management system keeps the pad tight and secure on the way up the mountain - Medium size has a 5 bike capacity and fits mid-size & some older full-size trucks - Large size has a 6 bike capacity and fits most full-size trucks - Medium Dimensions: 53-inch Long x 5-inch Wide x 17-inch Tall - Large Dimensions: 62-inch Long x 7-inch Wide x 20-inch Tall
Yakima's Glass Hatch Hook is an alternative strap for "Joe" series racks used on cars where standard hooks cannot be used.
Our burliest crossbar ever, the HD Bar is the one for heavy loads, rugged terrain and maximum utility. It delivers the muscle our new truck racks demand, and works with our StreamLine towers to get the heavy-duty job done right. The engineered aluminum construction provides superior support without weighing things down, integrated tie-down points to simplify load security, and T-slot attachment technology for adding gear mounts the fast, easy way. The Yakima Way. Product Details: - Strong, lightweight aluminum construction handles heavy loads great for rooftop tents - Integrated tie-down points on endcaps make it easy to secure gear - T-slots top and bottom to easily add Yakima and compatible gear mounts - Includes rubber infill for top T-slot for load protection and wind noise reduction - Built to last and look good doing it with a durable black powder-coat finish - Compatible with all StreamLine towers with our new HD Bar SL Adapter (sold separately #8003541) - Available in variety of lengths 55"/60"/68"/78" to create custom set-ups Dimensions: - Small = 9.61 lbs, L 55.00in x W 3.00in x H 1.50in - Medium = 10.68 lbs, Dimensions: L 60.00in x W 3.00in x H 1.50in - Large= 11.65 lbs, Dimensions: L 68.00in x W 3.00in x H 1.50in - X-Large= 12.00 lbs, Dimensions: L 78.00in x W 3.00in x H 1.50in