Lighting

Features: - Up to 20 lumens ANSI standard approved - Runtime: Day mode 4 hrs., High 8 hrs., Middle 15 hrs., Flash 30 hrs. - Li-Po rechargeable battery - Low power indicator - Motion sensor include - IPX4 waterproof rating - Charge via Micro USB cable

- Supercharged 1:30 to 95 hour run time - Extremely powerful 1,500 lumens in an astonishingly compact and stylish form. - Cycling Tuned Optics throws a long range, extra wide beam to cover road and mountain biking - Daytime visible flashes make you stand out on busy streets. - Two-button design lets you fine tune the brightness and flash speeds to your cycling needs. - Expand run times beyond factory default settings by fine tuning the brightness modes and flash speeds. - 9 lighting modes for day and night use - SteadyPulse mode alerts motorists with attention grabbing pulses while its overlapping steady beam constantly lights your way at night - DayLightning flash mode bursts lightning-like flashes to make you stand out in broad daylight on busy streets - 252 grams - IP67 water resistant for use in all weather conditions - USB rechargeable with 5 hours recharging time - Designed, engineered, and assembled in the USA.

- Supercharged 1:30 to 110 hour run time. - Extremely powerful 2,000 lumens in the most compact and stylish form - Cycling Tuned Optics throws a long range, extra wide beam to cover road and mountain biking. - Daytime visible flashes make you stand out on busy streets - Two-button design lets you fine tune the brightness and flash speeds to your cycling needs. - Expand run times beyond factory default settings by fine tuning the brightness modes and flash speeds. - 9 lighting modes for day and night use - SteadyPulse mode alerts motorists with attention grabbing pulses while its overlapping steady beam constantly lights your way at night - DayLightning flash mode bursts lightning-like flashes to make you stand out in broad daylight on busy streets. - 252 grams - IP67 water resistant for use in all weather conditions - USB rechargeable with 5 hours recharging time - Designed, engineered, and assembled in the USA.

- Installs under the seat for a low profile, less cluttered appearance - Easy to install and stays secure in all terrain - Clamps to most two-rail bicycle saddles - Use with Cygolite Hypershot and Hotshot tail lights - Can also be used with GoPro compatible interface - Premium plastic for strong durability - Only weighs 23 grams - Less prone to scratching bikes compared to metal mounts - Tail light secures to mount without removing from saddle rails - Designed, engineered, and assembled in the USA

Replacement bracket for Pico and Tigermoth lights. - Includes 1 front bracket, 1 rear bracket, and 2 mounting straps

The AMPP800's compact and durable alloy body features a three-level battery indicator that means there is always time to get home. Modes/Run Times: - Flashing Mode: 200 lumens | 30hrs - High Mode: 800 lumens | 1.5hrs - Middle Mode: 400 lumens | 2hrs - Low Mode: 200 lumens | 4hrs - Daytime HyperFlash Mode: 800/200 lumens | 4hrs - High power rechargeable headlight (800lm) - Powerful, wide beam with OptiCube lens technology - Excellent side visibility - Large-capacity lithium-ion rechargeable battery - Built-in fast recharging circuit: full charge in approx. 3 hours (minimum) - 3-level battery indicator (Blue: Above 50% Yellow: 30-50% Red: Less than 30%) - USB rechargeable (Micro-USB cable included) - Mode memory function - Five light modes (High / Middle / Low / Daytime HyperConstant / Flashing) - Turns on High mode with double-click of power button - FlexTight bracket

- High power 50 lux LED light, more than 50,000 hours life span - Compatible with 6-12V E-bike battery - Visible from the side - Double-Lens-Tech for perfect light distribution and high efficiancy - Retro reflector can be mounted optionally - 70g

The NiteRider Swift 500 delivers everyday reliable performance in an economical ultra compact head light. Sporting features like an easy on and off handlebar strap mount, low battery indicator and to top it off, it's USB Rechargeable; making it the perfect light of choice for commuters and cycling enthusiasts. Although small in size, make no mistake; the Swift 500 packs a big punch with a maximum light output of 500 lumens! Powered by an internal Lithium Ion battery, in Walk Mode, the Swift 500 can run for up to twenty-five hours before it needs a charge. - Highly durable design made with fiberglass reinforced plastic - Smooth 500 lumen beam pattern in an ultra compact and lightweight design - Innovative Collimator Lens – optimizes your field of view - Built-in, easy on and off handlebar strap mount - 4 Light Levels plus 1 Daylight Flash Mode - Fuel Gauge / Battery Level Indicator - FL1 Standard IP64, dust and water-resistant - Convenient USB rechargeable WARRANTY - The Swift 500 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Internal Li-Ion Battery - Build-in, Handlebar Mount - USB Charging Cable

350 lumens packed into an unbelievably compact form, the all-new Hypershot 350 is the latest and greatest from the originators of the most powerful line of LED bike tail lights. This powerful dual LED tail light puts out ultra-bright 350 lumen flashes in an extra-wide and long-range beam pattern that makes cyclists stand out both day and night. The 2 button design on the Hypershot lets cyclists control the speed of each flash mode and the brightness of the steady mode to their preference. And with 7 unique lighting modes and a run time range of 2 to 200 hours (yes, really), you won’t go unnoticed. (patent pending) - Powerful 350 lumen flashes to be seen day and night - Unique 2-button design lets you adjust the speed of each flash mode and the brightness of the Steady mode - Dual LED optics throws a long-range, extra-wide beam - Daytime visible flashes make you stand out on busy streets - 7 lighting modes for day and night use (Steady - Zoom - SteadyPulse® - Bzzz Flash - Triple Flash - DayLightning® Flash - Random Flash) - SteadyPulse® mode features a steady beam to help motorists gauge their distance while overlapping pulses keep them alert at night - DayLightning® flash mode bursts lightning-like flashes to make you stand out in broad daylight on busy streets - Zoom mode signals those around you with gentle changes in brightness - All-new Bzzz Flash mode alerts those around you with highly visible fast buzz-like flashes - Hard seat post mount and seat stay mount securely attaches onto seat posts and seat stays - Light mode memory saves the mode you're in before the light is turned off - Durable and weighs only 60 grams - IP64 water-resistant for use in all weather conditions - USB rechargeable with 2 to 200 hours of run time and 3 hours fast charging - Low battery indicator alerts you when a charge is needed Patent pending. *Features and specs are subject to change without notice.

Vis Adventure's powerfully focused beam and compact size make for a versatile light that can be used for any outdoor sport. It is perfectly designed to run on your helmet, bars, or anywhere you can fit a GoPro mount. Designed to maximize output in a compact design, the Vis Trail features an optimized reflector to make the beam broader and smoother without hotspots. Paired with either a 2, 3, or 6-cell interchangeable external battery, the Vis Trail gives you the flexibility to achieve the runtime you desire for the right price. This light is built for long gravel races, steep snowy slopes, and any adventure you throw at it. Charger not included and must be purchased separately. Key Features - 800 lumen output certified to the FL-1 Standard - Highest rated CREE LED - Custom engineered LED optics create a smooth, even beam pattern - Waterproof design provides all-weather reliability (submersible up to 1 meter) - 50" cord provides plenty of length for any setup requirement - Illuminated power button with low-runtime indicator - Compatible with 2, 3, and 6 cell batteries - Multiple mount options available including GoPro adapter - Additional one-touch 'Race Mode' feature enables riders to conveniently toggle between high and medium output Tech Specs - Lumen Output: High (800), Medium (400), Low (200), Pulse (200) - Beam Angle: 20° (spot) - IP Rating (FL-1): 67 - Depth Rating (FL-1): 1 meter - Impact Resistance (FL-1): 1 meter - Thermal Management: Passive Cooling - Fast Charge: False - Product Dimensions: 2.5'' x 1.2'' x 1.2''

Portland Design Works' Spaceship 3 Headlight/Radbot 500 Taillight Set offers bright LED lights, front and rear, for super nighttime visibility. The Spaceship 3 headlight focuses three brilliant LEDs through a precision lens, illuminating your course ahead. Powered by 2xAA batteries, the Spaceship 3 includes both steady and flashing modes for up to 100 hours of run time. Includes the Mission Control 2.0 mount. The RADBOT 500 is equipped with a blazing 0.5 watt LED and a large precision reflector to provide visibility to your backside. Powered by 2xAAA batteries, the RADBOT has three modes: zZz pop, Cornea Blitz and Rock Steady for up to 30 hours run time. It also features an on/off switch that must be depressed for 1.5 seconds to turn the light on and off. This helps prevent the RADBOT from being accidentally turned on when you're transporting it in your pocket or bag off the bike. Spaceship 3: - Three bright white LEDs - Runs on 2xAA batteries (included) for up to 100 hours of run time - 2 Modes: Steady and Flashing   - Weatherproof exterior for all season riding - Includes Mission Control 2.0 mount  - Weight: 91 g (3.2 oz) - Lifetime PDWarranty Radbot 500: - 0.5 watt red LED made by Nichia - 3 Modes: zZz pop, Cornea Blitz and Rock Steady for up to 30 hours run time - Large precision reflector - Includes both Stayputnik quick release and Rack mounts - Weatherproof exterior for all season riding - Runs on 2xAAA batteries (included) - Weight: 62 g (2.2 oz) - Lifetime PDWarranty

The Portland Design Works Daybot Tail Light has a CREE LED to power a 100 lumen Daytime Pulse mode for increased visibility on sunny days. Switch from Day Modes to Night Modes to conserve battery power. Hold the power button down for 1 second to turn the light on or off. The Daybot Tail Light has redesigned mount that works with the included seatpost and seatstay brackets. - 2 Day Modes (runtime): Solid - 60 lumens (6 hours), Pulse - 100 lumens (20 hours) - 3 Night Modes (runtime): Solid - 20 lumens (20 hours), Flash - 20 lumens (100 hours), Pulse - 20 lumens (30 hours) - USB rechargeable li-polymer battery - Weatherproof exterior for all season riding - Includes brackets for seatpost and seatstay mounting - Mounts vertically or horizontally - Includes Micro USB recharging cord - Weight: 1.9 oz - Lifetime Warranty

- Modes include High Steady, Medium Steady, Low Steady, DayTime Pulse, NightTime Pulse, and Economic Flash - Fully USB rechargeable: no batteries to buy or replace - Runtime up 24 hours - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Built-in battery indicators: RED = less than 25%, GREEN = fully charged - Side illumination ports

- Modes include High Flash, Medium Steady, Low Steady, DayTime Pulse, NightTime Pulse, Economic Flash - Fully USB rechargeable: no batteries to buy or replace - Runtime up to 11 hours 15 mins - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Built-in battery indicators: RED = less than 25%, GREEN = fully charged - Side illumination ports

- Front Modes include High Steady, Low Steady, DayTime Pulse, NightTime Pulse, and Economic Flash. - Rear Modes include High Flash, Low Steady, DayTime PULSE, NightTime Pulse and Economic Flash - Fully USB rechargeable: no batteries to buy or replace - Runtime up to 15 hours for front and 7.5 hours for rear - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Built-in battery indicators: RED = less than 25%, GREEN = fully charged - Multiple Mounting Options: vertical or horizontal mounting options as well as a clip for mounting to packs, bags or belts

Gain more room or find the perfect position for lights, computers, music players, GPS, or whatever, with the Topeak BarXtender. Attaches securely to the handlebars or stem and adjusts for optimum position. - Clamp: Fits 22-38 mm tubes (shims included) - Crossbar: Device mount bar 25.4 mm - Material: Engineering Grade Plastic and Steel - Mount: Handlebar, Handlebar Stem - Size (L x W x H): 18 x 3 x 3 cm, 7.1” x 1.2” x 1.2” (folded) - Size (L x W x H): 13 x 10 x 3 cm, 5.1” x 3.9” x 1.2” (open) - Weight: 116 g / 4.08 oz

Grab a set of Portland Design Works tail light brackets to mount your lights on seat posts and seat stays. - Seat post and seat stay brackets - Rubber shims included for a custom fit - Compatible with all PDW tail lights except Asteroid and Fenderbot

The ORB Bar End safety lights pair a sleek, compact design housed in an alloy chassis. They improve your chances of being seen, both from the rear and side. - Compact and lightweight - Side visibility - Fits drop bars with an inner diameter of 18.5mm-22mm - CR2032 battery x 2 - Long runtime - 3 modes

Be seen with CatEye's Omni 3 Taillight, which uses Omni Directional Technology for 360 degrees of visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 200 hours. Plus, CatEye's tool-free mount makes installation a breeze.

Small, compact, quick and easy - there’s no reason not to grab a pair of ORB’s for your next ride. MODES / RUN TIME: - Rapid Flashing Mode: 100 Hours - Constant: 50 Hours Features - Simple, lightweight, and compact design - Easy installation and switch operation - Universal rubber band - Battery type: CR2032 x2 - Mount size: ~22-32mm

See and be seen with CatEye's HL-EL135 Headlight. This compact light uses 3 super-bright LEDs for a wide beam that lets you see more of the road. With 2 AA batteries, it provides up to 80 hours of run time on steady mode and up to 320 hours on flash mode. Plus, the no-tools universal mount makes installation fast and easy.

Highlight your style and light up your ride. These sweet retro-inspired lights mount right to the brake bolt and fit any of our rides drilled for a front brake! - Batteries not included (4 x AAA) - LED lamp, plastic housing, chrome finish - 3 modes: high, low, and flashing - Mounts to handlebars or front brake bolt

This mount is designed to securely attach your Light and Motion Vis 180 Micro taillight to your bicycle.

Seamlessly mount your Nip e-Bike light to the underside of the Bosch computer module. - Compatible with Nip e-Bike Headlights

Convert your Light & Motion Vis 360 (sold separately) into a head mount and use it wherever your non-helmet adventures may lead you. Excels as a running companion and great for bicycle touring as it transforms your Vis 360 into a camping headlamp.

Engineered for day and night use, the Streak™ 450 headlight and Hotshot SL™ 50 tail light combo set delivers exceptional lighting coverage. The pair fires up an impressive 450 lumens forward and 50 lumens backwards to have you visually covered at night. Not only limited to night, both pack DayLightning® mode to make you stand out in broad daylight with powerful lightning-like flashes, giving you the advantage any time and anywhere you ride. Get the most out of your ride with the performance and features packed into this combo light set. Streak™ 450 USB: - Powerful 450 lumen output with 7 light modes - Built-in 24/7 Safety Technology® gives you a powerful selection of night and day modes (Boost - High - Medium - Low - SteadyPulse® - DayLightning® - Walking) - SteadyPulse® mode alerts night time motorists with pulses while constantly lighting your path - DayLightning® mode emits lightning-like flashes to highlight your presence in the brightest of daytime hours - USB rechargeable Li-ion battery - Low battery indicator - Light mode memory saves the mode you're in before the light is turned off - Rugged, water-resistant design only weighs 90 grams - Side illumination ports highlight your presence to nearby motorists - 2nd generation Locktite™ tool-free handlebar mount securely clamps to 22 to 32mm diameter handlebars Hotshot SL™ 50 USB: - Powerful 50 lumens flashing - Built-in 24/7 Safety Technology® gives you a powerful selection of 6 day and night modes (Steady - Zoom - SteadyPulse® - Triple Flash - DayLightning® - Random Flash) - Freely adjust the brightness of Steady mode and the flash tempo of the flashing modes with the simple 2 button interface - SteadyPulse® mode features a steady beam to help motorists gauge their distance while overlapping pulses keeps them alert at night - DayLightning® mode emits lightning-like flashes to highlight your presence in the brightest of daytime hours - Zoom mode signals those around you with gentle changes in brightness - USB rechargeable internal battery - Low battery indicator - Light mode memory saves the mode you're in before the light is turned off - Compact, water-resistant design weighs only 55 grams - Seat post mount included Patent pending. *Features and specs are subject to change without notice.

The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

The NiteRider Lumina Stick-On Mount is ideal for non-vented helmet mounting applications. Whether it be your favorite downhill/MX style helmet or explore the versatility of your Lumina head light by mounting it onto an industrial hard hat making it the ultimate work light! System Compatibility - Lumina Series - MiNewt Mini Series - Mako Series

USB Rechargeable, super bright, compact, quick and easy - there's no reason not to grab a pair of ORB's for your next ride. Features - USB rechargeable - Simple, lightweight, and compact design - Easy installation and switch operation - Universal rubber band - Mount size: ~22-32mm Modes/Run Time - Constant: 2.5 hours - Rapid flashing: 5.5 hours - Slow flashing: 6 hours

Super bright and compact, Cateye's Omni 3 Front Safety Light uses CatEye's Omni Directional Technology for increased visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and extend the run time. Plus, CatEye's tool-free FlexTight mount makes installation easy.